Commit 9eeb0898 authored by oftedal's avatar oftedal Committed by David S. Miller

Add support for allocating irqs for bootbus devices

Some devices that can generate interrupts are connected directly to the
CPU through the bootbus on sun4d. This patch allows IRQs to be allocated
for such devices. The information used for allocating interrupts for
sbus devices are present at the corresponding SBI node. For bootbus
devices this information is present in the bootbus node.
Signed-off-by: default avatarKjetil Oftedal <oftedal@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ea160584
...@@ -334,7 +334,8 @@ unsigned int sun4d_build_device_irq(struct platform_device *op, ...@@ -334,7 +334,8 @@ unsigned int sun4d_build_device_irq(struct platform_device *op,
unsigned int real_irq) unsigned int real_irq)
{ {
struct device_node *dp = op->dev.of_node; struct device_node *dp = op->dev.of_node;
struct device_node *io_unit, *sbi = dp->parent; struct device_node *board_parent, *bus = dp->parent;
char *bus_connection;
const struct linux_prom_registers *regs; const struct linux_prom_registers *regs;
unsigned int pil; unsigned int pil;
unsigned int irq; unsigned int irq;
...@@ -342,13 +343,20 @@ unsigned int sun4d_build_device_irq(struct platform_device *op, ...@@ -342,13 +343,20 @@ unsigned int sun4d_build_device_irq(struct platform_device *op,
int sbusl; int sbusl;
irq = real_irq; irq = real_irq;
while (sbi) { while (bus) {
if (!strcmp(sbi->name, "sbi")) if (!strcmp(bus->name, "sbi")) {
bus_connection = "io-unit";
break; break;
}
if (!strcmp(bus->name, "bootbus")) {
bus_connection = "cpu-unit";
break;
}
sbi = sbi->parent; bus = bus->parent;
} }
if (!sbi) if (!bus)
goto err_out; goto err_out;
regs = of_get_property(dp, "reg", NULL); regs = of_get_property(dp, "reg", NULL);
...@@ -358,17 +366,19 @@ unsigned int sun4d_build_device_irq(struct platform_device *op, ...@@ -358,17 +366,19 @@ unsigned int sun4d_build_device_irq(struct platform_device *op,
slot = regs->which_io; slot = regs->which_io;
/* /*
* If SBI's parent is not io-unit or the io-unit lacks * If Bus nodes parent is not io-unit/cpu-unit or the io-unit/cpu-unit
* a "board#" property, something is very wrong. * lacks a "board#" property, something is very wrong.
*/ */
if (!sbi->parent || strcmp(sbi->parent->name, "io-unit")) { if (!bus->parent || strcmp(bus->parent->name, bus_connection)) {
printk("%s: Error, parent is not io-unit.\n", sbi->full_name); printk(KERN_ERR "%s: Error, parent is not %s.\n",
bus->full_name, bus_connection);
goto err_out; goto err_out;
} }
io_unit = sbi->parent; board_parent = bus->parent;
board = of_getintprop_default(io_unit, "board#", -1); board = of_getintprop_default(board_parent, "board#", -1);
if (board == -1) { if (board == -1) {
printk("%s: Error, lacks board# property.\n", io_unit->full_name); printk(KERN_ERR "%s: Error, lacks board# property.\n",
board_parent->full_name);
goto err_out; goto err_out;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment