Commit 9f058fa2 authored by Avaneesh Kumar Dwivedi's avatar Avaneesh Kumar Dwivedi Committed by Bjorn Andersson

remoteproc: qcom: Add support for mss remoteproc on msm8996

This patch add support for mss boot on msm8996. Major changes
include initializing mss rproc for msm8996, making appropriate
change for executing mss reset sequence etc.
Tested-and-acked-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarAvaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 6c5a9dc2
......@@ -10,6 +10,7 @@ on the Qualcomm Hexagon core.
"qcom,q6v5-pil",
"qcom,msm8916-mss-pil",
"qcom,msm8974-mss-pil"
"qcom,msm8996-mss-pil"
- reg:
Usage: required
......
......@@ -32,6 +32,7 @@
#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include <linux/iopoll.h>
#include "remoteproc_internal.h"
#include "qcom_common.h"
......@@ -64,6 +65,8 @@
#define QDSP6SS_RESET_REG 0x014
#define QDSP6SS_GFMUX_CTL_REG 0x020
#define QDSP6SS_PWR_CTL_REG 0x030
#define QDSP6SS_MEM_PWR_CTL 0x0B0
#define QDSP6SS_STRAP_ACC 0x110
/* AXI Halt Register Offsets */
#define AXI_HALTREQ_REG 0x0
......@@ -92,6 +95,15 @@
#define QDSS_BHS_ON BIT(21)
#define QDSS_LDO_BYP BIT(22)
/* QDSP6v56 parameters */
#define QDSP6v56_LDO_BYP BIT(25)
#define QDSP6v56_BHS_ON BIT(24)
#define QDSP6v56_CLAMP_WL BIT(21)
#define QDSP6v56_CLAMP_QMC_MEM BIT(22)
#define HALT_CHECK_MAX_LOOPS 200
#define QDSP6SS_XO_CBCR 0x0038
#define QDSP6SS_ACC_OVERRIDE_VAL 0x20
struct reg_info {
struct regulator *reg;
int uV;
......@@ -110,6 +122,7 @@ struct rproc_hexagon_res {
struct qcom_mss_reg_res *active_supply;
char **proxy_clk_names;
char **active_clk_names;
int version;
bool need_mem_protection;
};
......@@ -158,7 +171,13 @@ struct q6v5 {
bool need_mem_protection;
int mpss_perm;
int mba_perm;
int version;
};
enum {
MSS_MSM8916,
MSS_MSM8974,
MSS_MSM8996,
};
static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
......@@ -387,33 +406,98 @@ static int q6v5proc_reset(struct q6v5 *qproc)
{
u32 val;
int ret;
int i;
/* Assert resets, stop core */
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
val |= (Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE);
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
/* Enable power block headswitch, and wait for it to stabilize */
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= QDSS_BHS_ON | QDSS_LDO_BYP;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
udelay(1);
/*
* Turn on memories. L2 banks should be done individually
* to minimize inrush current.
*/
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_L2DATA_SLP_NRET_N_2;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_L2DATA_SLP_NRET_N_1;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_L2DATA_SLP_NRET_N_0;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
if (qproc->version == MSS_MSM8996) {
/* Override the ACC value if required */
writel(QDSP6SS_ACC_OVERRIDE_VAL,
qproc->reg_base + QDSP6SS_STRAP_ACC);
/* Assert resets, stop core */
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
/* BHS require xo cbcr to be enabled */
val = readl(qproc->reg_base + QDSP6SS_XO_CBCR);
val |= 0x1;
writel(val, qproc->reg_base + QDSP6SS_XO_CBCR);
/* Read CLKOFF bit to go low indicating CLK is enabled */
ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_XO_CBCR,
val, !(val & BIT(31)), 1,
HALT_CHECK_MAX_LOOPS);
if (ret) {
dev_err(qproc->dev,
"xo cbcr enabling timed out (rc:%d)\n", ret);
return ret;
}
/* Enable power block headswitch and wait for it to stabilize */
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= QDSP6v56_BHS_ON;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
udelay(1);
/* Put LDO in bypass mode */
val |= QDSP6v56_LDO_BYP;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
/* Deassert QDSP6 compiler memory clamp */
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val &= ~QDSP6v56_CLAMP_QMC_MEM;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
/* Deassert memory peripheral sleep and L2 memory standby */
val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
/* Turn on L1, L2, ETB and JU memories 1 at a time */
val = readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
for (i = 19; i >= 0; i--) {
val |= BIT(i);
writel(val, qproc->reg_base +
QDSP6SS_MEM_PWR_CTL);
/*
* Read back value to ensure the write is done then
* wait for 1us for both memory peripheral and data
* array to turn on.
*/
val |= readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
udelay(1);
}
/* Remove word line clamp */
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val &= ~QDSP6v56_CLAMP_WL;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
} else {
/* Assert resets, stop core */
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
/* Enable power block headswitch and wait for it to stabilize */
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= QDSS_BHS_ON | QDSS_LDO_BYP;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
udelay(1);
/*
* Turn on memories. L2 banks should be done individually
* to minimize inrush current.
*/
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_L2DATA_SLP_NRET_N_2;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_L2DATA_SLP_NRET_N_1;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_L2DATA_SLP_NRET_N_0;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
}
/* Remove IO clamp */
val &= ~Q6SS_CLAMP_IO;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
......@@ -803,6 +887,16 @@ static int q6v5_stop(struct rproc *rproc)
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
if (qproc->version == MSS_MSM8996) {
/*
* To avoid high MX current during LPASS/MSS restart.
*/
val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
val |= Q6SS_CLAMP_IO | QDSP6v56_CLAMP_WL |
QDSP6v56_CLAMP_QMC_MEM;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
}
ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
qproc->mpss_phys, qproc->mpss_size);
......@@ -1106,6 +1200,7 @@ static int q6v5_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
qproc->version = desc->version;
qproc->need_mem_protection = desc->need_mem_protection;
ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
if (ret < 0)
......@@ -1158,6 +1253,24 @@ static int q6v5_remove(struct platform_device *pdev)
return 0;
}
static const struct rproc_hexagon_res msm8996_mss = {
.hexagon_mba_image = "mba.mbn",
.proxy_clk_names = (char*[]){
"xo",
"pnoc",
NULL
},
.active_clk_names = (char*[]){
"iface",
"bus",
"mem",
"gpll0_mss_clk",
NULL
},
.need_mem_protection = true,
.version = MSS_MSM8996,
};
static const struct rproc_hexagon_res msm8916_mss = {
.hexagon_mba_image = "mba.mbn",
.proxy_supply = (struct qcom_mss_reg_res[]) {
......@@ -1186,6 +1299,7 @@ static const struct rproc_hexagon_res msm8916_mss = {
NULL
},
.need_mem_protection = false,
.version = MSS_MSM8916,
};
static const struct rproc_hexagon_res msm8974_mss = {
......@@ -1224,12 +1338,14 @@ static const struct rproc_hexagon_res msm8974_mss = {
NULL
},
.need_mem_protection = false,
.version = MSS_MSM8974,
};
static const struct of_device_id q6v5_of_match[] = {
{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
{ },
};
MODULE_DEVICE_TABLE(of, q6v5_of_match);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment