Commit 9f1c824e authored by Kevin McKinney's avatar Kevin McKinney Committed by Greg Kroah-Hartman

Staging: bcm: Fix all white space issues in target_params.h

This patch fixes all white space issues in
target_parms.h as reported by checkpatch.pl.
Signed-off-by: default avatarKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f91d7665
......@@ -3,79 +3,59 @@
typedef struct _TARGET_PARAMS
{
B_UINT32 m_u32CfgVersion;
// Scanning Related Params
B_UINT32 m_u32CenterFrequency;
B_UINT32 m_u32BandAScan;
B_UINT32 m_u32BandBScan;
B_UINT32 m_u32BandCScan;
// QoS Params
B_UINT32 m_u32ErtpsOptions;
B_UINT32 m_u32PHSEnable;
// HO Params
B_UINT32 m_u32HoEnable;
B_UINT32 m_u32HoReserved1;
B_UINT32 m_u32HoReserved2;
// Power Control Params
B_UINT32 m_u32MimoEnable;
B_UINT32 m_u32SecurityEnable;
B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
/* PowerSaving Mode Options:
bit 0 = 1: CPE mode - to keep pcmcia if alive;
bit 1 = 1: CINR reporting in Idlemode Msg
bit 2 = 1: Default PSC Enable in sleepmode*/
B_UINT32 m_u32PowerSavingModeOptions;
B_UINT32 m_u32ArqEnable;
// From Version #3, the HARQ section renamed as general
B_UINT32 m_u32HarqEnable;
// EEPROM Param Location
B_UINT32 m_u32EEPROMFlag;
// BINARY TYPE - 4th MSByte: Interface Type - 3rd MSByte: Vendor Type - 2nd MSByte
// Unused - LSByte
B_UINT32 m_u32Customize;
B_UINT32 m_u32ConfigBW; /* In Hz */
B_UINT32 m_u32ShutDownInitThresholdTimer;
B_UINT32 m_u32RadioParameter;
B_UINT32 m_u32PhyParameter1;
B_UINT32 m_u32PhyParameter2;
B_UINT32 m_u32PhyParameter3;
B_UINT32 m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17 test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
B_UINT32 m_u32CfgVersion;
// Scanning Related Params
B_UINT32 m_u32CenterFrequency;
B_UINT32 m_u32BandAScan;
B_UINT32 m_u32BandBScan;
B_UINT32 m_u32BandCScan;
// QoS Params
B_UINT32 m_u32ErtpsOptions;
B_UINT32 m_u32PHSEnable;
// HO Params
B_UINT32 m_u32HoEnable;
B_UINT32 m_u32HoReserved1;
B_UINT32 m_u32HoReserved2;
// Power Control Params
B_UINT32 m_u32MimoEnable;
B_UINT32 m_u32SecurityEnable;
B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
/* PowerSaving Mode Options:
bit 0 = 1: CPE mode - to keep pcmcia if alive;
bit 1 = 1: CINR reporting in Idlemode Msg
bit 2 = 1: Default PSC Enable in sleepmode*/
B_UINT32 m_u32PowerSavingModeOptions;
B_UINT32 m_u32ArqEnable;
// From Version #3, the HARQ section renamed as general
B_UINT32 m_u32HarqEnable;
// EEPROM Param Location
B_UINT32 m_u32EEPROMFlag;
// BINARY TYPE - 4th MSByte: Interface Type - 3rd MSByte: Vendor Type - 2nd MSByte
// Unused - LSByte
B_UINT32 m_u32Customize;
B_UINT32 m_u32ConfigBW; /* In Hz */
B_UINT32 m_u32ShutDownInitThresholdTimer;
B_UINT32 m_u32RadioParameter;
B_UINT32 m_u32PhyParameter1;
B_UINT32 m_u32PhyParameter2;
B_UINT32 m_u32PhyParameter3;
B_UINT32 m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17 test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
B_UINT32 m_u32MaxMACDataperDLFrame;
B_UINT32 m_u32MaxMACDataperULFrame;
B_UINT32 m_u32Corr2MacFlags;
//adding driver params.
//adding driver params.
B_UINT32 HostDrvrConfig1;
B_UINT32 HostDrvrConfig2;
B_UINT32 HostDrvrConfig3;
B_UINT32 HostDrvrConfig4;
B_UINT32 HostDrvrConfig5;
B_UINT32 HostDrvrConfig6;
B_UINT32 m_u32SegmentedPUSCenable;
B_UINT32 HostDrvrConfig2;
B_UINT32 HostDrvrConfig3;
B_UINT32 HostDrvrConfig4;
B_UINT32 HostDrvrConfig5;
B_UINT32 HostDrvrConfig6;
B_UINT32 m_u32SegmentedPUSCenable;
// removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
//BAMC Related Parameters
//Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
//bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
//BAMC Related Parameters
//Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
//bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
B_UINT32 m_u32BandAMCEnable;
} stTargetParams,TARGET_PARAMS,*PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
} stTargetParams, TARGET_PARAMS, *PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment