Staging: bcm: Fix all white space issues in target_params.h

This patch fixes all white space issues in
target_parms.h as reported by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/bcm/target_params.h

@@ -4,40 +4,28 @@
 typedef struct _TARGET_PARAMS
 {
 	B_UINT32 m_u32CfgVersion;
-
 	// Scanning Related Params
 	B_UINT32 m_u32CenterFrequency;
 	B_UINT32 m_u32BandAScan;
 	B_UINT32 m_u32BandBScan;
 	B_UINT32 m_u32BandCScan;
-
-
 	// QoS Params
 	B_UINT32 m_u32ErtpsOptions;
-
 	B_UINT32 m_u32PHSEnable;
-
-
 	// HO Params
 	B_UINT32 m_u32HoEnable;
-
 	B_UINT32 m_u32HoReserved1;
 	B_UINT32 m_u32HoReserved2;
 	// Power Control Params
-
 	B_UINT32 m_u32MimoEnable;
-
 	B_UINT32 m_u32SecurityEnable;
-
 	B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
 	/* PowerSaving Mode Options:
 	   bit 0 = 1: CPE mode - to keep pcmcia if alive;
 	   bit 1 = 1: CINR reporting in Idlemode Msg
 	   bit 2 = 1: Default PSC Enable in sleepmode*/
 	B_UINT32 m_u32PowerSavingModeOptions;
-
 	B_UINT32 m_u32ArqEnable;
-
 	// From Version #3, the HARQ section renamed as general
 	B_UINT32 m_u32HarqEnable;
 	// EEPROM Param Location
@@ -47,19 +35,14 @@ typedef struct _TARGET_PARAMS
 	B_UINT32 m_u32Customize;
 	B_UINT32 m_u32ConfigBW;  /* In Hz */
 	B_UINT32 m_u32ShutDownInitThresholdTimer;
-
 	B_UINT32 m_u32RadioParameter;
 	B_UINT32 m_u32PhyParameter1;
 	B_UINT32 m_u32PhyParameter2;
 	B_UINT32 m_u32PhyParameter3;
-
 	B_UINT32 m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
-
 	B_UINT32 m_u32MaxMACDataperDLFrame;
 	B_UINT32 m_u32MaxMACDataperULFrame;
-
 	B_UINT32 m_u32Corr2MacFlags;
-
 	//adding driver params.
 	B_UINT32 HostDrvrConfig1;
 	B_UINT32 HostDrvrConfig2;
@@ -68,14 +51,11 @@ typedef struct _TARGET_PARAMS
 	B_UINT32 HostDrvrConfig5;
 	B_UINT32 HostDrvrConfig6;
 	B_UINT32 m_u32SegmentedPUSCenable;
-
 	// removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
-
 	//BAMC Related Parameters
 	//Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 – Enable Band AMC signaling.
 	//bit 16-31 Band AMC Data configuration: Bit 16 = 1 – Band AMC 2x3 support.
 	B_UINT32 m_u32BandAMCEnable;
-
-} stTargetParams,TARGET_PARAMS,*PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
+} stTargetParams, TARGET_PARAMS, *PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
 
 #endif