rtw88: change rtw_info() to proper message level

Larry reported funny log entries [1] when he used rtl8821ce. These
messages are not harmless, but not useful for users, so change them to
rtw_dbg() level. By the way, I review all rtw_info() and change others
to rtw_warn().

[1] https://lore.kernel.org/linux-wireless/c356d5ae-a7b3-3065-1121-64c446e70333@lwfinger.net/Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220218035527.9835-1-pkshih@realtek.com

drivers/net/wireless/realtek/rtw88/debug.c

@@ -390,7 +390,7 @@ static ssize_t rtw_debugfs_set_h2c(struct file *filp,
 		     &param[0], &param[1], &param[2], &param[3],
 		     &param[4], &param[5], &param[6], &param[7]);
 	if (num != 8) {
-		rtw_info(rtwdev, "invalid H2C command format for debug\n");
+		rtw_warn(rtwdev, "invalid H2C command format for debug\n");
 		return -EINVAL;
 	}
 

drivers/net/wireless/realtek/rtw88/debug.h

@@ -23,6 +23,7 @@ enum rtw_debug_mask {
 	RTW_DBG_PATH_DIV	= 0x00004000,
 	RTW_DBG_ADAPTIVITY	= 0x00008000,
 	RTW_DBG_HW_SCAN		= 0x00010000,
+	RTW_DBG_STATE		= 0x00020000,
 
 	RTW_DBG_ALL		= 0xffffffff
 };

drivers/net/wireless/realtek/rtw88/fw.c

@@ -2146,7 +2146,7 @@ void rtw_hw_scan_status_report(struct rtw_dev *rtwdev, struct sk_buff *skb)
 	rtw_hw_scan_complete(rtwdev, vif, aborted);
 
 	if (aborted)
-		rtw_info(rtwdev, "HW scan aborted with code: %d\n", rc);
+		rtw_dbg(rtwdev, RTW_DBG_HW_SCAN, "HW scan aborted with code: %d\n", rc);
 }
 
 void rtw_store_op_chan(struct rtw_dev *rtwdev)

drivers/net/wireless/realtek/rtw88/mac80211.c

@@ -208,7 +208,7 @@ static int rtw_ops_add_interface(struct ieee80211_hw *hw,
 
 	mutex_unlock(&rtwdev->mutex);
 
-	rtw_info(rtwdev, "start vif %pM on port %d\n", vif->addr, rtwvif->port);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "start vif %pM on port %d\n", vif->addr, rtwvif->port);
 	return 0;
 }
 
@@ -219,7 +219,7 @@ static void rtw_ops_remove_interface(struct ieee80211_hw *hw,
 	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
 	u32 config = 0;
 
-	rtw_info(rtwdev, "stop vif %pM on port %d\n", vif->addr, rtwvif->port);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "stop vif %pM on port %d\n", vif->addr, rtwvif->port);
 
 	mutex_lock(&rtwdev->mutex);
 
@@ -245,8 +245,8 @@ static int rtw_ops_change_interface(struct ieee80211_hw *hw,
 {
 	struct rtw_dev *rtwdev = hw->priv;
 
-	rtw_info(rtwdev, "change vif %pM (%d)->(%d), p2p (%d)->(%d)\n",
-		 vif->addr, vif->type, type, vif->p2p, p2p);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "change vif %pM (%d)->(%d), p2p (%d)->(%d)\n",
+		vif->addr, vif->type, type, vif->p2p, p2p);
 
 	rtw_ops_remove_interface(hw, vif);
 

drivers/net/wireless/realtek/rtw88/main.c

@@ -317,8 +317,8 @@ int rtw_sta_add(struct rtw_dev *rtwdev, struct ieee80211_sta *sta,
 
 	rtwdev->sta_cnt++;
 	rtwdev->beacon_loss = false;
-	rtw_info(rtwdev, "sta %pM joined with macid %d\n",
-		 sta->addr, si->mac_id);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "sta %pM joined with macid %d\n",
+		sta->addr, si->mac_id);
 
 	return 0;
 }
@@ -339,8 +339,8 @@ void rtw_sta_remove(struct rtw_dev *rtwdev, struct ieee80211_sta *sta,
 	kfree(si->mask);
 
 	rtwdev->sta_cnt--;
-	rtw_info(rtwdev, "sta %pM with macid %d left\n",
-		 sta->addr, si->mac_id);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "sta %pM with macid %d left\n",
+		sta->addr, si->mac_id);
 }
 
 struct rtw_fwcd_hdr {

drivers/net/wireless/realtek/rtw88/rtw8821c.c

@@ -499,7 +499,7 @@ static s8 get_cck_rx_pwr(struct rtw_dev *rtwdev, u8 lna_idx, u8 vga_idx)
 	}
 
 	if (lna_idx >= lna_gain_table_size) {
-		rtw_info(rtwdev, "incorrect lna index (%d)\n", lna_idx);
+		rtw_warn(rtwdev, "incorrect lna index (%d)\n", lna_idx);
 		return -120;
 	}
 

drivers/net/wireless/realtek/rtw88/rtw8822b.c

@@ -1012,12 +1012,12 @@ static int rtw8822b_set_antenna(struct rtw_dev *rtwdev,
 		antenna_tx, antenna_rx);
 
 	if (!rtw8822b_check_rf_path(antenna_tx)) {
-		rtw_info(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
+		rtw_warn(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
 		return -EINVAL;
 	}
 
 	if (!rtw8822b_check_rf_path(antenna_rx)) {
-		rtw_info(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
+		rtw_warn(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
 		return -EINVAL;
 	}
 

drivers/net/wireless/realtek/rtw88/rtw8822c.c

@@ -2798,7 +2798,7 @@ static int rtw8822c_set_antenna(struct rtw_dev *rtwdev,
 	case BB_PATH_AB:
 		break;
 	default:
-		rtw_info(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
+		rtw_warn(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
 		return -EINVAL;
 	}
 
@@ -2808,7 +2808,7 @@ static int rtw8822c_set_antenna(struct rtw_dev *rtwdev,
 	case BB_PATH_AB:
 		break;
 	default:
-		rtw_info(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
+		rtw_warn(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
 		return -EINVAL;
 	}
 

drivers/net/wireless/realtek/rtw88/sar.c

@@ -91,10 +91,10 @@ int rtw_set_sar_specs(struct rtw_dev *rtwdev,
 			return -EINVAL;
 
 		power = sar->sub_specs[i].power;
-		rtw_info(rtwdev, "On freq %u to %u, set SAR %d in 1/%lu dBm\n",
-			 rtw_common_sar_freq_ranges[idx].start_freq,
-			 rtw_common_sar_freq_ranges[idx].end_freq,
-			 power, BIT(RTW_COMMON_SAR_FCT));
+		rtw_dbg(rtwdev, RTW_DBG_REGD, "On freq %u to %u, set SAR %d in 1/%lu dBm\n",
+			rtw_common_sar_freq_ranges[idx].start_freq,
+			rtw_common_sar_freq_ranges[idx].end_freq,
+			power, BIT(RTW_COMMON_SAR_FCT));
 
 		for (j = 0; j < RTW_RF_PATH_MAX; j++) {
 			for (k = 0; k < RTW_RATE_SECTION_MAX; k++) {