Commit a01c452e authored by Matthias Urlichs's avatar Matthias Urlichs Committed by Greg Kroah-Hartman

USB: Removed 3-port device handler from Option driver

Dead code.

From: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 7c1c2f73
...@@ -108,9 +108,6 @@ static struct usb_device_id option_ids1[] = { ...@@ -108,9 +108,6 @@ static struct usb_device_id option_ids1[] = {
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
static struct usb_device_id option_ids3[] = {
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids); MODULE_DEVICE_TABLE(usb, option_ids);
...@@ -125,33 +122,6 @@ static struct usb_driver option_driver = { ...@@ -125,33 +122,6 @@ static struct usb_driver option_driver = {
/* The card has three separate interfaces, which the serial driver /* The card has three separate interfaces, which the serial driver
* recognizes separately, thus num_port=1. * recognizes separately, thus num_port=1.
*/ */
static struct usb_serial_driver option_3port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "option3",
},
.description = "GSM modem (3-port)",
.id_table = option_ids3,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 3,
.open = option_open,
.close = option_close,
.write = option_write,
.write_room = option_write_room,
.chars_in_buffer = option_chars_in_buffer,
.throttle = option_rx_throttle,
.unthrottle = option_rx_unthrottle,
.ioctl = option_ioctl,
.set_termios = option_set_termios,
.break_ctl = option_break_ctl,
.tiocmget = option_tiocmget,
.tiocmset = option_tiocmset,
.attach = option_startup,
.shutdown = option_shutdown,
.read_int_callback = option_instat_callback,
};
static struct usb_serial_driver option_1port_device = { static struct usb_serial_driver option_1port_device = {
.driver = { .driver = {
...@@ -220,9 +190,6 @@ static int __init option_init(void) ...@@ -220,9 +190,6 @@ static int __init option_init(void)
retval = usb_serial_register(&option_1port_device); retval = usb_serial_register(&option_1port_device);
if (retval) if (retval)
goto failed_1port_device_register; goto failed_1port_device_register;
retval = usb_serial_register(&option_3port_device);
if (retval)
goto failed_3port_device_register;
retval = usb_register(&option_driver); retval = usb_register(&option_driver);
if (retval) if (retval)
goto failed_driver_register; goto failed_driver_register;
...@@ -232,8 +199,6 @@ static int __init option_init(void) ...@@ -232,8 +199,6 @@ static int __init option_init(void)
return 0; return 0;
failed_driver_register: failed_driver_register:
usb_serial_deregister (&option_3port_device);
failed_3port_device_register:
usb_serial_deregister (&option_1port_device); usb_serial_deregister (&option_1port_device);
failed_1port_device_register: failed_1port_device_register:
return retval; return retval;
...@@ -242,7 +207,6 @@ static int __init option_init(void) ...@@ -242,7 +207,6 @@ static int __init option_init(void)
static void __exit option_exit(void) static void __exit option_exit(void)
{ {
usb_deregister (&option_driver); usb_deregister (&option_driver);
usb_serial_deregister (&option_3port_device);
usb_serial_deregister (&option_1port_device); usb_serial_deregister (&option_1port_device);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment