Commit a062cc5a authored by Stephane Chatty's avatar Stephane Chatty Committed by Jiri Kosina

HID: hid-multitouch: add support for the IDEACOM 6650 chip

The IDEACOM 6650 multitouch chip, present in various all-in-one computers,
uses the serial version of the HID multitouch protocol. No existing class
supports this.

In principle, the new MT_CLS_SERIAL should work for other
serial panels as well, perhaps including some eGalax panels.
Signed-off-by: default avatarStephane Chatty <chatty@enac.fr>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent c50bb1a4
......@@ -1388,6 +1388,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HANVON, USB_DEVICE_ID_HANVON_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, USB_DEVICE_ID_IDEACOM_IDC6650) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ILITEK, USB_DEVICE_ID_ILITEK_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS, USB_DEVICE_ID_IRTOUCH_INFRARED_USB) },
......
......@@ -347,6 +347,9 @@
#define USB_DEVICE_ID_UGCI_FLYING 0x0020
#define USB_DEVICE_ID_UGCI_FIGHTING 0x0030
#define USB_VENDOR_ID_IDEACOM 0x1cb6
#define USB_DEVICE_ID_IDEACOM_IDC6650 0x6650
#define USB_VENDOR_ID_ILITEK 0x222a
#define USB_DEVICE_ID_ILITEK_MULTITOUCH 0x0001
......
......@@ -47,10 +47,11 @@ MODULE_LICENSE("GPL");
#define MT_QUIRK_SLOT_IS_CONTACTID (1 << 1)
#define MT_QUIRK_CYPRESS (1 << 2)
#define MT_QUIRK_SLOT_IS_CONTACTNUMBER (1 << 3)
#define MT_QUIRK_VALID_IS_INRANGE (1 << 4)
#define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 5)
#define MT_QUIRK_EGALAX_XYZ_FIXUP (1 << 6)
#define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 7)
#define MT_QUIRK_ALWAYS_VALID (1 << 4)
#define MT_QUIRK_VALID_IS_INRANGE (1 << 5)
#define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 6)
#define MT_QUIRK_EGALAX_XYZ_FIXUP (1 << 7)
#define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 8)
struct mt_slot {
__s32 x, y, p, w, h;
......@@ -86,11 +87,12 @@ struct mt_class {
/* classes of device behavior */
#define MT_CLS_DEFAULT 0x0001
#define MT_CLS_CONFIDENCE 0x0002
#define MT_CLS_CONFIDENCE_MINUS_ONE 0x0003
#define MT_CLS_DUAL_INRANGE_CONTACTID 0x0004
#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 0x0005
#define MT_CLS_DUAL_NSMU_CONTACTID 0x0006
#define MT_CLS_SERIAL 0x0002
#define MT_CLS_CONFIDENCE 0x0003
#define MT_CLS_CONFIDENCE_MINUS_ONE 0x0004
#define MT_CLS_DUAL_INRANGE_CONTACTID 0x0005
#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 0x0006
#define MT_CLS_DUAL_NSMU_CONTACTID 0x0007
/* vendor specific classes */
#define MT_CLS_3M 0x0101
......@@ -134,6 +136,8 @@ static int find_slot_from_contactid(struct mt_device *td)
struct mt_class mt_classes[] = {
{ .name = MT_CLS_DEFAULT,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP },
{ .name = MT_CLS_SERIAL,
.quirks = MT_QUIRK_ALWAYS_VALID},
{ .name = MT_CLS_CONFIDENCE,
.quirks = MT_QUIRK_VALID_IS_CONFIDENCE },
{ .name = MT_CLS_CONFIDENCE_MINUS_ONE,
......@@ -445,7 +449,9 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
if (hid->claimed & HID_CLAIMED_INPUT && td->slots) {
switch (usage->hid) {
case HID_DG_INRANGE:
if (quirks & MT_QUIRK_VALID_IS_INRANGE)
if (quirks & MT_QUIRK_ALWAYS_VALID)
td->curvalid = true;
else if (quirks & MT_QUIRK_VALID_IS_INRANGE)
td->curvalid = value;
break;
case HID_DG_TIPSWITCH:
......@@ -672,6 +678,11 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
USB_DEVICE_ID_GOODTOUCH_000f) },
/* Ideacom panel */
{ .driver_data = MT_CLS_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
USB_DEVICE_ID_IDEACOM_IDC6650) },
/* Ilitek dual touch panel */
{ .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_ILITEK,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment