Commit a06d2dd7 authored by Zong-Zhe Yang's avatar Zong-Zhe Yang Committed by Kalle Valo

rtw89: convert rtw89_band to nl80211_band precisely

Before 6 GHz band was supported, i.e. only 2 GHz and 5 GHz, they were the
same from the numerical point of view. However, after 6 GHz band support,
we need to do this conversion logically.
Signed-off-by: default avatarZong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: default avatarPing-Ke Shih <pkshih@realtek.com>
Signed-off-by: default avatarKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-6-pkshih@realtek.com
parent aebc048d
......@@ -1608,10 +1608,13 @@ static void rtw89_core_update_rx_status(struct rtw89_dev *rtwdev,
if (rtwdev->scanning &&
RTW89_CHK_FW_FEATURE(SCAN_OFFLOAD, &rtwdev->fw)) {
rx_status->freq =
ieee80211_channel_to_frequency(hal->current_channel,
hal->current_band_type);
rx_status->band = rtwdev->hal.current_band_type;
u8 chan = hal->current_channel;
u8 band = hal->current_band_type;
enum nl80211_band nl_band;
nl_band = rtw89_hw_to_nl80211_band(band);
rx_status->freq = ieee80211_channel_to_frequency(chan, nl_band);
rx_status->band = nl_band;
}
if (desc_info->icv_err || desc_info->crc32_err)
......
......@@ -3480,6 +3480,20 @@ static inline u8 rtw89_hw_to_rate_info_bw(enum rtw89_bandwidth hw_bw)
return RATE_INFO_BW_20;
}
static inline
enum nl80211_band rtw89_hw_to_nl80211_band(enum rtw89_band hw_band)
{
switch (hw_band) {
default:
case RTW89_BAND_2G:
return NL80211_BAND_2GHZ;
case RTW89_BAND_5G:
return NL80211_BAND_5GHZ;
case RTW89_BAND_6G:
return NL80211_BAND_6GHZ;
}
}
static inline
enum rtw89_bandwidth nl_to_rtw89_bandwidth(enum nl80211_chan_width width)
{
......
......@@ -2068,7 +2068,7 @@ static void rtw89_release_pkt_list(struct rtw89_dev *rtwdev)
struct rtw89_pktofld_info *info, *tmp;
u8 idx;
for (idx = RTW89_BAND_2G; idx < NUM_NL80211_BANDS; idx++) {
for (idx = NL80211_BAND_2GHZ; idx < NUM_NL80211_BANDS; idx++) {
if (!(rtwdev->chip->support_bands & BIT(idx)))
continue;
......
......@@ -429,27 +429,28 @@ void rtw89_phy_rate_pattern_vif(struct rtw89_dev *rtwdev,
RTW89_HW_RATE_MCS16,
RTW89_HW_RATE_MCS24};
u8 band = rtwdev->hal.current_band_type;
enum nl80211_band nl_band = rtw89_hw_to_nl80211_band(band);
u8 tx_nss = rtwdev->hal.tx_nss;
u8 i;
for (i = 0; i < tx_nss; i++)
if (!__check_rate_pattern(&next_pattern, hw_rate_he[i],
RA_MASK_HE_RATES, RTW89_RA_MODE_HE,
mask->control[band].he_mcs[i],
mask->control[nl_band].he_mcs[i],
0, true))
goto out;
for (i = 0; i < tx_nss; i++)
if (!__check_rate_pattern(&next_pattern, hw_rate_vht[i],
RA_MASK_VHT_RATES, RTW89_RA_MODE_VHT,
mask->control[band].vht_mcs[i],
mask->control[nl_band].vht_mcs[i],
0, true))
goto out;
for (i = 0; i < tx_nss; i++)
if (!__check_rate_pattern(&next_pattern, hw_rate_ht[i],
RA_MASK_HT_RATES, RTW89_RA_MODE_HT,
mask->control[band].ht_mcs[i],
mask->control[nl_band].ht_mcs[i],
0, true))
goto out;
......@@ -457,18 +458,18 @@ void rtw89_phy_rate_pattern_vif(struct rtw89_dev *rtwdev,
* require at least one basic rate for ieee80211_set_bitrate_mask,
* so the decision just depends on if all bitrates are set or not.
*/
sband = rtwdev->hw->wiphy->bands[band];
sband = rtwdev->hw->wiphy->bands[nl_band];
if (band == RTW89_BAND_2G) {
if (!__check_rate_pattern(&next_pattern, RTW89_HW_RATE_CCK1,
RA_MASK_CCK_RATES | RA_MASK_OFDM_RATES,
RTW89_RA_MODE_CCK | RTW89_RA_MODE_OFDM,
mask->control[band].legacy,
mask->control[nl_band].legacy,
BIT(sband->n_bitrates) - 1, false))
goto out;
} else {
if (!__check_rate_pattern(&next_pattern, RTW89_HW_RATE_OFDM6,
RA_MASK_OFDM_RATES, RTW89_RA_MODE_OFDM,
mask->control[band].legacy,
mask->control[nl_band].legacy,
BIT(sband->n_bitrates) - 1, false))
goto out;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment