Commit a09fc446 authored by Franck Bui-Huu's avatar Franck Bui-Huu Committed by Ralf Baechle

[MIPS] setup.c: use early_param() for early command line parsing

There's no point to rewrite some logic to parse command line
to pass initrd parameters or to declare a user memory area.
We could use instead parse_early_param() that does the same
thing.
Signed-off-by: default avatarFranck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 1c6fd44d
......@@ -135,138 +135,54 @@ static void __init print_memory_map(void)
}
}
static void __init parse_cmdline_early(void)
{
char c = ' ', *to = command_line, *from = saved_command_line;
unsigned long start_at, mem_size;
int len = 0;
int usermem = 0;
printk("Determined physical RAM map:\n");
print_memory_map();
for (;;) {
/*
* "mem=XXX[kKmM]" defines a memory region from
* 0 to <XXX>, overriding the determined size.
* "mem=XXX[KkmM]@YYY[KkmM]" defines a memory region from
* <YYY> to <YYY>+<XXX>, overriding the determined size.
*/
if (c == ' ' && !memcmp(from, "mem=", 4)) {
if (to != command_line)
to--;
/*
* If a user specifies memory size, we
* blow away any automatically generated
* size.
*/
if (usermem == 0) {
boot_mem_map.nr_map = 0;
usermem = 1;
}
mem_size = memparse(from + 4, &from);
if (*from == '@')
start_at = memparse(from + 1, &from);
else
start_at = 0;
add_memory_region(start_at, mem_size, BOOT_MEM_RAM);
}
c = *(from++);
if (!c)
break;
if (CL_SIZE <= ++len)
break;
*(to++) = c;
}
*to = '\0';
if (usermem) {
printk("User-defined physical RAM map:\n");
print_memory_map();
}
}
/*
* Manage initrd
*/
#ifdef CONFIG_BLK_DEV_INITRD
static int __init parse_rd_cmdline(unsigned long *rd_start, unsigned long *rd_end)
static int __init rd_start_early(char *p)
{
/*
* "rd_start=0xNNNNNNNN" defines the memory address of an initrd
* "rd_size=0xNN" it's size
*/
unsigned long start = 0;
unsigned long size = 0;
unsigned long end;
char cmd_line[CL_SIZE];
char *start_str;
char *size_str;
char *tmp;
strcpy(cmd_line, command_line);
*command_line = 0;
tmp = cmd_line;
/* Ignore "rd_start=" strings in other parameters. */
start_str = strstr(cmd_line, "rd_start=");
if (start_str && start_str != cmd_line && *(start_str - 1) != ' ')
start_str = strstr(start_str, " rd_start=");
while (start_str) {
if (start_str != cmd_line)
strncat(command_line, tmp, start_str - tmp);
start = memparse(start_str + 9, &start_str);
tmp = start_str + 1;
start_str = strstr(start_str, " rd_start=");
}
if (*tmp)
strcat(command_line, tmp);
strcpy(cmd_line, command_line);
*command_line = 0;
tmp = cmd_line;
/* Ignore "rd_size" strings in other parameters. */
size_str = strstr(cmd_line, "rd_size=");
if (size_str && size_str != cmd_line && *(size_str - 1) != ' ')
size_str = strstr(size_str, " rd_size=");
while (size_str) {
if (size_str != cmd_line)
strncat(command_line, tmp, size_str - tmp);
size = memparse(size_str + 8, &size_str);
tmp = size_str + 1;
size_str = strstr(size_str, " rd_size=");
}
if (*tmp)
strcat(command_line, tmp);
unsigned long start = memparse(p, &p);
#ifdef CONFIG_64BIT
/* HACK: Guess if the sign extension was forgotten */
if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
start |= 0xffffffff00000000UL;
#endif
initrd_start = start;
initrd_end += start;
return 0;
}
early_param("rd_start", rd_start_early);
static int __init rd_size_early(char *p)
{
initrd_end += memparse(p, &p);
end = start + size;
if (start && end) {
*rd_start = start;
*rd_end = end;
return 1;
}
return 0;
}
early_param("rd_size", rd_size_early);
static unsigned long __init init_initrd(void)
{
unsigned long tmp, end;
unsigned long tmp, end, size;
u32 *initrd_header;
ROOT_DEV = Root_RAM0;
if (parse_rd_cmdline(&initrd_start, &initrd_end))
return initrd_end;
/*
* Board specific code should have set up initrd_start
* and initrd_end...
* Board specific code or command line parser should have
* already set up initrd_start and initrd_end. In these cases
* perfom sanity checks and use them if all looks good.
*/
size = initrd_end - initrd_start;
if (initrd_end == 0 || size == 0) {
initrd_start = 0;
initrd_end = 0;
} else
return initrd_end;
end = (unsigned long)&_end;
tmp = PAGE_ALIGN(end) - sizeof(u32) * 2;
if (tmp < end)
......@@ -436,8 +352,6 @@ static void __init bootmem_init(void)
*
* o plat_mem_setup() detects the memory configuration and will record detected
* memory areas using add_memory_region.
* o parse_cmdline_early() parses the command line for mem= options which,
* iff detected, will override the results of the automatic detection.
*
* At this stage the memory configuration of the system is known to the
* kernel but generic memory managment system is still entirely uninitialized.
......@@ -455,19 +369,53 @@ static void __init bootmem_init(void)
* initialization hook for anything else was introduced.
*/
extern void plat_mem_setup(void);
static int usermem __initdata = 0;
static int __init early_parse_mem(char *p)
{
unsigned long start, size;
/*
* If a user specifies memory size, we
* blow away any automatically generated
* size.
*/
if (usermem == 0) {
boot_mem_map.nr_map = 0;
usermem = 1;
}
start = 0;
size = memparse(p, &p);
if (*p == '@')
start = memparse(p + 1, &p);
add_memory_region(start, size, BOOT_MEM_RAM);
return 0;
}
early_param("mem", early_parse_mem);
static void __init arch_mem_init(char **cmdline_p)
{
extern void plat_mem_setup(void);
/* call board setup routine */
plat_mem_setup();
printk("Determined physical RAM map:\n");
print_memory_map();
strlcpy(command_line, arcs_cmdline, sizeof(command_line));
strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
parse_cmdline_early();
parse_early_param();
if (usermem) {
printk("User-defined physical RAM map:\n");
print_memory_map();
}
bootmem_init();
sparse_init();
paging_init();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment