Commit a0a6d4ff authored by Jani Nikula's avatar Jani Nikula

drm/i915/dsi: add support for gpio elements on CHV

Add support for CHV gpio programming in DSI gpio elements.

v2: Overhaul macros according to Ville's review.

v3: Address Ville's review:
 - swap E and SE gpio ranges
 - add a note about max SE index
 - use GPO, not HIZ
 - swap cfg0 and cfg1

v4: fix port for dsi sequence versions 1 and 2

[Rewritten by Jani, based on earlier work by Yogesh and Deepak.]
Signed-off-by: default avatarYogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: default avatarDeepak M <m.deepak@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/bdaaf9915a5005305b31bb26cf619a5a82472f2a.1461666263.git.jani.nikula@intel.com
parent 4b541efe
...@@ -95,6 +95,24 @@ static struct gpio_map vlv_gpio_table[] = { ...@@ -95,6 +95,24 @@ static struct gpio_map vlv_gpio_table[] = {
{ VLV_GPIO_NC_11_PANEL1_BKLTCTL }, { VLV_GPIO_NC_11_PANEL1_BKLTCTL },
}; };
#define CHV_GPIO_IDX_START_N 0
#define CHV_GPIO_IDX_START_E 73
#define CHV_GPIO_IDX_START_SW 100
#define CHV_GPIO_IDX_START_SE 198
#define CHV_VBT_MAX_PINS_PER_FMLY 15
#define CHV_GPIO_PAD_CFG0(f, i) (0x4400 + (f) * 0x400 + (i) * 8)
#define CHV_GPIO_GPIOEN (1 << 15)
#define CHV_GPIO_GPIOCFG_GPIO (0 << 8)
#define CHV_GPIO_GPIOCFG_GPO (1 << 8)
#define CHV_GPIO_GPIOCFG_GPI (2 << 8)
#define CHV_GPIO_GPIOCFG_HIZ (3 << 8)
#define CHV_GPIO_GPIOTXSTATE(state) ((!!(state)) << 1)
#define CHV_GPIO_PAD_CFG1(f, i) (0x4400 + (f) * 0x400 + (i) * 8 + 4)
#define CHV_GPIO_CFGLOCK (1 << 31)
static inline enum port intel_dsi_seq_port_to_port(u8 port) static inline enum port intel_dsi_seq_port_to_port(u8 port)
{ {
return port ? PORT_C : PORT_A; return port ? PORT_C : PORT_A;
...@@ -232,6 +250,56 @@ static void vlv_exec_gpio(struct drm_i915_private *dev_priv, ...@@ -232,6 +250,56 @@ static void vlv_exec_gpio(struct drm_i915_private *dev_priv,
mutex_unlock(&dev_priv->sb_lock); mutex_unlock(&dev_priv->sb_lock);
} }
static void chv_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
u16 cfg0, cfg1;
u16 family_num;
u8 port;
if (dev_priv->vbt.dsi.seq_version >= 3) {
if (gpio_index >= CHV_GPIO_IDX_START_SE) {
/* XXX: it's unclear whether 255->57 is part of SE. */
gpio_index -= CHV_GPIO_IDX_START_SE;
port = CHV_IOSF_PORT_GPIO_SE;
} else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
gpio_index -= CHV_GPIO_IDX_START_SW;
port = CHV_IOSF_PORT_GPIO_SW;
} else if (gpio_index >= CHV_GPIO_IDX_START_E) {
gpio_index -= CHV_GPIO_IDX_START_E;
port = CHV_IOSF_PORT_GPIO_E;
} else {
port = CHV_IOSF_PORT_GPIO_N;
}
} else {
/* XXX: The spec is unclear about CHV GPIO on seq v2 */
if (gpio_source != 0) {
DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
return;
}
if (gpio_index >= CHV_GPIO_IDX_START_E) {
DRM_DEBUG_KMS("invalid gpio index %u for GPIO N\n",
gpio_index);
return;
}
port = CHV_IOSF_PORT_GPIO_N;
}
family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY;
gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY;
cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index);
cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index);
mutex_lock(&dev_priv->sb_lock);
vlv_iosf_sb_write(dev_priv, port, cfg1, 0);
vlv_iosf_sb_write(dev_priv, port, cfg0,
CHV_GPIO_GPIOCFG_GPO | CHV_GPIO_GPIOTXSTATE(value));
mutex_unlock(&dev_priv->sb_lock);
}
static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data) static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
{ {
struct drm_device *dev = intel_dsi->base.base.dev; struct drm_device *dev = intel_dsi->base.base.dev;
...@@ -255,6 +323,8 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data) ...@@ -255,6 +323,8 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
if (IS_VALLEYVIEW(dev_priv)) if (IS_VALLEYVIEW(dev_priv))
vlv_exec_gpio(dev_priv, gpio_source, gpio_index, value); vlv_exec_gpio(dev_priv, gpio_source, gpio_index, value);
else if (IS_CHERRYVIEW(dev_priv))
chv_exec_gpio(dev_priv, gpio_source, gpio_index, value);
else else
DRM_DEBUG_KMS("GPIO element not supported on this platform\n"); DRM_DEBUG_KMS("GPIO element not supported on this platform\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment