Commit a0aab9e1 authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Mark Brown

ASoC: codecs: add wsa881x amplifier support

This patch adds support to WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier is primarily interfaced with SoundWire.
One WSA is used for mono speaker configuration and second one
would give stereo setup.

This patch is tested on SDM845 based DragonBoard DB845c and
Lenovo YOGA C630 Laptop based on SDM850 with WSA8815
speaker amplifiers.
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200107135929.3267-3-srinivas.kandagatla@linaro.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent fbcdf32f
......@@ -262,6 +262,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM9705 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WSA881X if SOUNDWIRE
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
......@@ -1481,6 +1482,15 @@ config SND_SOC_WM9713
select REGMAP_AC97
select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WSA881X
tristate "WSA881X Codec"
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
tristate
help
This enables support for Qualcomm WSA8810/WSA8815 Class-D
Smart Speaker Amplifier.
config SND_SOC_ZX_AUD96P22
tristate "ZTE ZX AUD96P22 CODEC"
depends on I2C
......
......@@ -278,6 +278,7 @@ snd-soc-wm9705-objs := wm9705.o
snd-soc-wm9712-objs := wm9712.o
snd-soc-wm9713-objs := wm9713.o
snd-soc-wm-hubs-objs := wm_hubs.o
snd-soc-wsa881x-objs := wsa881x.o
snd-soc-zx-aud96p22-objs := zx_aud96p22.o
# Amp
snd-soc-max9877-objs := max9877.o
......@@ -568,6 +569,7 @@ obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
obj-$(CONFIG_SND_SOC_WM_ADSP) += snd-soc-wm-adsp.o
obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
obj-$(CONFIG_SND_SOC_WSA881X) += snd-soc-wsa881x.o
obj-$(CONFIG_SND_SOC_ZX_AUD96P22) += snd-soc-zx-aud96p22.o
# Amp
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment