mmc: longer timeout for long read time quirk

[ Upstream commit 32ecd320 ]

008GE0 Toshiba mmc in some Intel Baytrail tablets responds to
MMC_SEND_EXT_CSD in 450-600ms.

This patch will...

() Increase the long read time quirk timeout from 300ms to 600ms. Original
   author of that quirk says 300ms was only a guess and that the number
   may need to be raised in the future.

() Add this specific MMC to the quirk
Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

drivers/mmc/card/block.c

@@ -2403,11 +2403,12 @@ static const struct mmc_fixup blk_fixups[] =
 		  MMC_QUIRK_BLK_NO_CMD23),
 
 	/*
-	 * Some Micron MMC cards needs longer data read timeout than
-	 * indicated in CSD.
+	 * Some MMC cards need longer data read timeout than indicated in CSD.
 	 */
 	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
 		  MMC_QUIRK_LONG_READ_TIME),
+	MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_LONG_READ_TIME),
 
 	/*
 	 * On these Samsung MoviNAND parts, performing secure erase or

drivers/mmc/core/core.c

@@ -831,11 +831,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
 	/*
 	 * Some cards require longer data read timeout than indicated in CSD.
 	 * Address this by setting the read timeout to a "reasonably high"
-	 * value. For the cards tested, 300ms has proven enough. If necessary,
+	 * value. For the cards tested, 600ms has proven enough. If necessary,
 	 * this value can be increased if other problematic cards require this.
 	 */
 	if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
-		data->timeout_ns = 300000000;
+		data->timeout_ns = 600000000;
 		data->timeout_clks = 0;
 	}