drm/i915/guc: Make scratch register base and count flexible

We are using some scratch registers in MMIO based send function.
Make their base and count flexible in preparation of upcoming
GuC firmware/hardware changes. While around, change cmd len
parameter verification from WARN_ON to GEM_BUG_ON as we don't
need this all the time.

v2: call out WARN/GEM_BUG change in the commit msg (Daniele)
v3: don't overqualify the ints (Chris)
v4: rebase and use proper enum
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drivers/gpu/drm/i915/intel_uc.c

@@ -260,9 +260,36 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv)
 	__intel_uc_fw_fini(&dev_priv->huc.fw);
 }
 
+static inline i915_reg_t guc_send_reg(struct intel_guc *guc, u32 i)
+{
+	GEM_BUG_ON(!guc->send_regs.base);
+	GEM_BUG_ON(!guc->send_regs.count);
+	GEM_BUG_ON(i >= guc->send_regs.count);
+
+	return _MMIO(guc->send_regs.base + 4 * i);
+}
+
+static void guc_init_send_regs(struct intel_guc *guc)
+{
+	struct drm_i915_private *dev_priv = guc_to_i915(guc);
+	enum forcewake_domains fw_domains = 0;
+	unsigned int i;
+
+	guc->send_regs.base = i915_mmio_reg_offset(SOFT_SCRATCH(0));
+	guc->send_regs.count = SOFT_SCRATCH_COUNT - 1;
+
+	for (i = 0; i < guc->send_regs.count; i++) {
+		fw_domains |= intel_uncore_forcewake_for_reg(dev_priv,
+					guc_send_reg(guc, i),
+					FW_REG_READ | FW_REG_WRITE);
+	}
+	guc->send_regs.fw_domains = fw_domains;
+}
+
 static int guc_enable_communication(struct intel_guc *guc)
 {
 	/* XXX: placeholder for alternate setup */
+	guc_init_send_regs(guc);
 	guc->send = intel_guc_send_mmio;
 	return 0;
 }
@@ -407,19 +434,19 @@ int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len)
 	int i;
 	int ret;
 
-	if (WARN_ON(len < 1 || len > 15))
-		return -EINVAL;
+	GEM_BUG_ON(!len);
+	GEM_BUG_ON(len > guc->send_regs.count);
 
 	mutex_lock(&guc->send_mutex);
-	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_BLITTER);
+	intel_uncore_forcewake_get(dev_priv, guc->send_regs.fw_domains);
 
 	dev_priv->guc.action_count += 1;
 	dev_priv->guc.action_cmd = action[0];
 
 	for (i = 0; i < len; i++)
-		I915_WRITE(SOFT_SCRATCH(i), action[i]);
+		I915_WRITE(guc_send_reg(guc, i), action[i]);
 
-	POSTING_READ(SOFT_SCRATCH(i - 1));
+	POSTING_READ(guc_send_reg(guc, i - 1));
 
 	intel_guc_notify(guc);
 
@@ -428,7 +455,7 @@ int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len)
 	 * Fast commands should still complete in 10us.
 	 */
 	ret = __intel_wait_for_register_fw(dev_priv,
-					   SOFT_SCRATCH(0),
+					   guc_send_reg(guc, 0),
 					   INTEL_GUC_RECV_MASK,
 					   INTEL_GUC_RECV_MASK,
 					   10, 10, &status);
@@ -450,7 +477,7 @@ int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len)
 	}
 	dev_priv->guc.action_status = status;
 
-	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_BLITTER);
+	intel_uncore_forcewake_put(dev_priv, guc->send_regs.fw_domains);
 	mutex_unlock(&guc->send_mutex);
 
 	return ret;

drivers/gpu/drm/i915/intel_uc.h

@@ -205,6 +205,13 @@ struct intel_guc {
 	uint64_t submissions[I915_NUM_ENGINES];
 	uint32_t last_seqno[I915_NUM_ENGINES];
 
+	/* GuC's FW specific registers used in MMIO send */
+	struct {
+		u32 base;
+		unsigned int count;
+		enum forcewake_domains fw_domains;
+	} send_regs;
+
 	/* To serialize the intel_guc_send actions */
 	struct mutex send_mutex;