Commit a0ec8d1d authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

media: tc358743: add CEC support

Add CEC support for the tc358743 HDMI-CSI bridge.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 42ded7a8
......@@ -354,6 +354,14 @@ config VIDEO_TC358743
To compile this driver as a module, choose M here: the
module will be called tc358743.
config VIDEO_TC358743_CEC
bool "Enable Toshiba TC358743 CEC support"
depends on VIDEO_TC358743
select CEC_CORE
---help---
When selected the tc358743 will support the optional
HDMI CEC feature.
config VIDEO_TVP514X
tristate "Texas Instruments TVP514x video decoder"
depends on VIDEO_V4L2 && I2C
......
......@@ -39,6 +39,7 @@
#include <linux/workqueue.h>
#include <linux/v4l2-dv-timings.h>
#include <linux/hdmi.h>
#include <media/cec.h>
#include <media/v4l2-dv-timings.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
......@@ -63,6 +64,7 @@ MODULE_LICENSE("GPL");
#define I2C_MAX_XFER_SIZE (EDID_BLOCK_SIZE + 2)
#define POLL_INTERVAL_CEC_MS 10
#define POLL_INTERVAL_MS 1000
static const struct v4l2_dv_timings_cap tc358743_timings_cap = {
......@@ -106,6 +108,8 @@ struct tc358743_state {
u8 csi_lanes_in_use;
struct gpio_desc *reset_gpio;
struct cec_adapter *cec_adap;
};
static void tc358743_enable_interrupts(struct v4l2_subdev *sd,
......@@ -595,6 +599,7 @@ static void tc358743_set_ref_clk(struct v4l2_subdev *sd)
struct tc358743_platform_data *pdata = &state->pdata;
u32 sys_freq;
u32 lockdet_ref;
u32 cec_freq;
u16 fh_min;
u16 fh_max;
......@@ -626,6 +631,15 @@ static void tc358743_set_ref_clk(struct v4l2_subdev *sd)
i2c_wr8_and_or(sd, NCO_F0_MOD, ~MASK_NCO_F0_MOD,
(pdata->refclk_hz == 27000000) ?
MASK_NCO_F0_MOD_27MHZ : 0x0);
/*
* Trial and error suggests that the default register value
* of 656 is for a 42 MHz reference clock. Use that to derive
* a new value based on the actual reference clock.
*/
cec_freq = (656 * sys_freq) / 4200;
i2c_wr16(sd, CECHCLK, cec_freq);
i2c_wr16(sd, CECLCLK, cec_freq);
}
static void tc358743_set_csi_color_space(struct v4l2_subdev *sd)
......@@ -814,11 +828,17 @@ static void tc358743_initial_setup(struct v4l2_subdev *sd)
struct tc358743_state *state = to_state(sd);
struct tc358743_platform_data *pdata = &state->pdata;
/* CEC and IR are not supported by this driver */
i2c_wr16_and_or(sd, SYSCTL, ~(MASK_CECRST | MASK_IRRST),
(MASK_CECRST | MASK_IRRST));
/*
* IR is not supported by this driver.
* CEC is only enabled if needed.
*/
i2c_wr16_and_or(sd, SYSCTL, ~(MASK_IRRST | MASK_CECRST),
(MASK_IRRST | MASK_CECRST));
tc358743_reset(sd, MASK_CTXRST | MASK_HDMIRST);
#ifdef CONFIG_VIDEO_TC358743_CEC
tc358743_reset(sd, MASK_CECRST);
#endif
tc358743_sleep_mode(sd, false);
i2c_wr16(sd, FIFOCTL, pdata->fifo_level);
......@@ -842,6 +862,133 @@ static void tc358743_initial_setup(struct v4l2_subdev *sd)
i2c_wr8(sd, VOUT_SET3, MASK_VOUT_EXTCNT);
}
/* --------------- CEC --------------- */
#ifdef CONFIG_VIDEO_TC358743_CEC
static int tc358743_cec_adap_enable(struct cec_adapter *adap, bool enable)
{
struct tc358743_state *state = adap->priv;
struct v4l2_subdev *sd = &state->sd;
i2c_wr32(sd, CECIMSK, enable ? MASK_CECTIM | MASK_CECRIM : 0);
i2c_wr32(sd, CECICLR, MASK_CECTICLR | MASK_CECRICLR);
i2c_wr32(sd, CECEN, enable);
if (enable)
i2c_wr32(sd, CECREN, MASK_CECREN);
return 0;
}
static int tc358743_cec_adap_monitor_all_enable(struct cec_adapter *adap,
bool enable)
{
struct tc358743_state *state = adap->priv;
struct v4l2_subdev *sd = &state->sd;
u32 reg;
reg = i2c_rd32(sd, CECRCTL1);
if (enable)
reg |= MASK_CECOTH;
else
reg &= ~MASK_CECOTH;
i2c_wr32(sd, CECRCTL1, reg);
return 0;
}
static int tc358743_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
{
struct tc358743_state *state = adap->priv;
struct v4l2_subdev *sd = &state->sd;
unsigned int la = 0;
if (log_addr != CEC_LOG_ADDR_INVALID) {
la = i2c_rd32(sd, CECADD);
la |= 1 << log_addr;
}
i2c_wr32(sd, CECADD, la);
return 0;
}
static int tc358743_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
u32 signal_free_time, struct cec_msg *msg)
{
struct tc358743_state *state = adap->priv;
struct v4l2_subdev *sd = &state->sd;
unsigned int i;
i2c_wr32(sd, CECTCTL,
(cec_msg_is_broadcast(msg) ? MASK_CECBRD : 0) |
(signal_free_time - 1));
for (i = 0; i < msg->len; i++)
i2c_wr32(sd, CECTBUF1 + i * 4,
msg->msg[i] | ((i == msg->len - 1) ? MASK_CECTEOM : 0));
i2c_wr32(sd, CECTEN, MASK_CECTEN);
return 0;
}
static const struct cec_adap_ops tc358743_cec_adap_ops = {
.adap_enable = tc358743_cec_adap_enable,
.adap_log_addr = tc358743_cec_adap_log_addr,
.adap_transmit = tc358743_cec_adap_transmit,
.adap_monitor_all_enable = tc358743_cec_adap_monitor_all_enable,
};
static void tc358743_cec_isr(struct v4l2_subdev *sd, u16 intstatus,
bool *handled)
{
struct tc358743_state *state = to_state(sd);
unsigned int cec_rxint, cec_txint;
unsigned int clr = 0;
cec_rxint = i2c_rd32(sd, CECRSTAT);
cec_txint = i2c_rd32(sd, CECTSTAT);
if (intstatus & MASK_CEC_RINT)
clr |= MASK_CECRICLR;
if (intstatus & MASK_CEC_TINT)
clr |= MASK_CECTICLR;
i2c_wr32(sd, CECICLR, clr);
if ((intstatus & MASK_CEC_TINT) && cec_txint) {
if (cec_txint & MASK_CECTIEND)
cec_transmit_attempt_done(state->cec_adap,
CEC_TX_STATUS_OK);
else if (cec_txint & MASK_CECTIAL)
cec_transmit_attempt_done(state->cec_adap,
CEC_TX_STATUS_ARB_LOST);
else if (cec_txint & MASK_CECTIACK)
cec_transmit_attempt_done(state->cec_adap,
CEC_TX_STATUS_NACK);
else if (cec_txint & MASK_CECTIUR) {
/*
* Not sure when this bit is set. Treat
* it as an error for now.
*/
cec_transmit_attempt_done(state->cec_adap,
CEC_TX_STATUS_ERROR);
}
*handled = true;
}
if ((intstatus & MASK_CEC_RINT) &&
(cec_rxint & MASK_CECRIEND)) {
struct cec_msg msg = {};
unsigned int i;
unsigned int v;
v = i2c_rd32(sd, CECRCTR);
msg.len = v & 0x1f;
for (i = 0; i < msg.len; i++) {
v = i2c_rd32(sd, CECRBUF1 + i * 4);
msg.msg[i] = v & 0xff;
}
cec_received_msg(state->cec_adap, &msg);
*handled = true;
}
i2c_wr16(sd, INTSTATUS,
intstatus & (MASK_CEC_RINT | MASK_CEC_TINT));
}
#endif
/* --------------- IRQ --------------- */
static void tc358743_format_change(struct v4l2_subdev *sd)
......@@ -1296,6 +1443,15 @@ static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
intstatus &= ~MASK_HDMI_INT;
}
#ifdef CONFIG_VIDEO_TC358743_CEC
if (intstatus & (MASK_CEC_RINT | MASK_CEC_TINT)) {
tc358743_cec_isr(sd, intstatus, handled);
i2c_wr16(sd, INTSTATUS,
intstatus & (MASK_CEC_RINT | MASK_CEC_TINT));
intstatus &= ~(MASK_CEC_RINT | MASK_CEC_TINT);
}
#endif
if (intstatus & MASK_CSI_INT) {
u32 csi_int = i2c_rd32(sd, CSI_INT);
......@@ -1328,10 +1484,15 @@ static irqreturn_t tc358743_irq_handler(int irq, void *dev_id)
static void tc358743_irq_poll_timer(unsigned long arg)
{
struct tc358743_state *state = (struct tc358743_state *)arg;
unsigned int msecs;
schedule_work(&state->work_i2c_poll);
mod_timer(&state->timer, jiffies + msecs_to_jiffies(POLL_INTERVAL_MS));
/*
* If CEC is present, then we need to poll more frequently,
* otherwise we will miss CEC messages.
*/
msecs = state->cec_adap ? POLL_INTERVAL_CEC_MS : POLL_INTERVAL_MS;
mod_timer(&state->timer, jiffies + msecs_to_jiffies(msecs));
}
static void tc358743_work_i2c_poll(struct work_struct *work)
......@@ -1621,6 +1782,8 @@ static int tc358743_s_edid(struct v4l2_subdev *sd,
{
struct tc358743_state *state = to_state(sd);
u16 edid_len = edid->blocks * EDID_BLOCK_SIZE;
u16 pa;
int err;
int i;
v4l2_dbg(2, debug, sd, "%s, pad %d, start block %d, blocks %d\n",
......@@ -1638,6 +1801,12 @@ static int tc358743_s_edid(struct v4l2_subdev *sd,
edid->blocks = EDID_NUM_BLOCKS_MAX;
return -E2BIG;
}
pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
err = cec_phys_addr_validate(pa, &pa, NULL);
if (err)
return err;
cec_phys_addr_invalidate(state->cec_adap);
tc358743_disable_edid(sd);
......@@ -1654,6 +1823,8 @@ static int tc358743_s_edid(struct v4l2_subdev *sd,
state->edid_blocks_written = edid->blocks;
cec_s_phys_addr(state->cec_adap, pa, false);
if (tx_5v_power_present(sd))
tc358743_enable_edid(sd);
......@@ -1867,6 +2038,7 @@ static int tc358743_probe(struct i2c_client *client,
struct tc358743_state *state;
struct tc358743_platform_data *pdata = client->dev.platform_data;
struct v4l2_subdev *sd;
u16 irq_mask = MASK_HDMI_MSK | MASK_CSI_MSK;
int err;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
......@@ -1945,6 +2117,17 @@ static int tc358743_probe(struct i2c_client *client,
INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug,
tc358743_delayed_work_enable_hotplug);
#ifdef CONFIG_VIDEO_TC358743_CEC
state->cec_adap = cec_allocate_adapter(&tc358743_cec_adap_ops,
state, dev_name(&client->dev),
CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL, CEC_MAX_LOG_ADDRS);
if (IS_ERR(state->cec_adap)) {
err = state->cec_adap ? PTR_ERR(state->cec_adap) : -ENOMEM;
goto err_hdl;
}
irq_mask |= MASK_CEC_RMSK | MASK_CEC_TMSK;
#endif
tc358743_initial_setup(sd);
tc358743_s_dv_timings(sd, &default_timing);
......@@ -1971,8 +2154,16 @@ static int tc358743_probe(struct i2c_client *client,
add_timer(&state->timer);
}
err = cec_register_adapter(state->cec_adap, &client->dev);
if (err < 0) {
pr_err("%s: failed to register the cec device\n", __func__);
cec_delete_adapter(state->cec_adap);
state->cec_adap = NULL;
goto err_work_queues;
}
tc358743_enable_interrupts(sd, tx_5v_power_present(sd));
i2c_wr16(sd, INTMASK, ~(MASK_HDMI_MSK | MASK_CSI_MSK) & 0xffff);
i2c_wr16(sd, INTMASK, ~irq_mask);
err = v4l2_ctrl_handler_setup(sd->ctrl_handler);
if (err)
......@@ -1984,6 +2175,7 @@ static int tc358743_probe(struct i2c_client *client,
return 0;
err_work_queues:
cec_unregister_adapter(state->cec_adap);
if (!state->i2c_client->irq)
flush_work(&state->work_i2c_poll);
cancel_delayed_work(&state->delayed_work_enable_hotplug);
......@@ -2004,6 +2196,7 @@ static int tc358743_remove(struct i2c_client *client)
flush_work(&state->work_i2c_poll);
}
cancel_delayed_work(&state->delayed_work_enable_hotplug);
cec_unregister_adapter(state->cec_adap);
v4l2_async_unregister_subdev(sd);
v4l2_device_unregister_subdev(sd);
mutex_destroy(&state->confctl_mutex);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment