ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-16-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm/boot/dts/qcom/qcom-sdx55.dtsi

@@ -228,31 +228,26 @@ usb_hsphy: phy@ff4000 {
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
 		};
 
 		mc_virt: interconnect@1100000 {
@@ -603,7 +598,7 @@ usb_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};