iio: temperature: mlx90635 MLX90635 IR Temperature sensor

MLX90635 is an Infra Red contactless temperature sensor most suitable
for consumer applications where measured object temperature is in range
between -20 to 100 degrees Celsius. It has improved accuracy for
measurements within temperature range of human body and can operate in
ambient temperature range between -20 to 85 degrees Celsius.

Driver provides simple power management possibility as it returns to
lowest possible power mode (Step sleep mode) in which temperature
measurements can still be performed, yet for continuous measuring it
switches to Continuous power mode where measurements constantly change
without triggering.

Signed-off-by: Crt Mori<cmo@melexis.com>
Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS

@@ -13725,6 +13725,13 @@ S:	Supported
 W:	http://www.melexis.com
 F:	drivers/iio/temperature/mlx90632.c
 
+MELEXIS MLX90635 DRIVER
+M:	Crt Mori <cmo@melexis.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	http://www.melexis.com
+F:	drivers/iio/temperature/mlx90635.c
+
 MELFAS MIP4 TOUCHSCREEN DRIVER
 M:	Sangwon Jee <jeesw@melfas.com>
 S:	Supported

drivers/iio/temperature/Kconfig

@@ -76,6 +76,18 @@ config MLX90632
 	  This driver can also be built as a module. If so, the module will
 	  be called mlx90632.
 
+config MLX90635
+	tristate "MLX90635 contact-less infrared sensor with medical accuracy"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Melexis
+	  MLX90635 contact-less infrared sensor with medical accuracy
+	  connected with I2C.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mlx90635.
+
 config TMP006
 	tristate "TMP006 infrared thermopile sensor"
 	depends on I2C

drivers/iio/temperature/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_MAX31865) += max31865.o
 obj-$(CONFIG_MCP9600) += mcp9600.o
 obj-$(CONFIG_MLX90614) += mlx90614.o
 obj-$(CONFIG_MLX90632) += mlx90632.o
+obj-$(CONFIG_MLX90632) += mlx90635.o
 obj-$(CONFIG_TMP006) += tmp006.o
 obj-$(CONFIG_TMP007) += tmp007.o
 obj-$(CONFIG_TMP117) += tmp117.o