Merge branch 'korina-next'

Thomas Bogendoerfer says:

====================
net: Korina improvements

While converting Mikrotik RB532 support to use device tree I stumbled
over the korina ethernet driver, which used way too many MIPS specific
hacks. This series cleans this all up and adds support for device tree.

Changes in v6:
 - remove korina from resource names and adapt DT binding to it
 - removed superfluous braces around of_get_mac_address

Changes in v5:
  - fixed email address in binding document, which prevented sending it

Changes in v4:
  - improve error returns in mdio_read further
  - added clock name and improved clk handling
  - fixed binding errors

Changes in v3:
  - use readl_poll_timeout_atomic in mdio_wait
  - return -ETIMEDOUT, if mdio_wait failed
  - added DT binding and changed name to idt,3243x-emac
  - fixed usage of of_get_mac_address for net-next

Changes in v2:
  - added device tree support to get rid of idt_cpu_freq
  - fixed compile test on 64bit archs
  - fixed descriptor current address handling by storing/using mapped
    dma addresses (dma controller modifies current address)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/idt,3243x-emac.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/idt,3243x-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79rc3243x Ethernet controller
+
+description: Ethernet controller integrated into IDT 79RC3243x family SoCs
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: idt,3243x-emac
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: emac
+      - const: dma_rx
+      - const: dma_tx
+
+  interrupts:
+    items:
+      - description: RX interrupt
+      - description: TX interrupt
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mdioclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+
+    ethernet@60000 {
+        compatible = "idt,3243x-emac";
+
+        reg = <0x60000 0x10000>,
+              <0x40000 0x14>,
+              <0x40014 0x14>;
+        reg-names = "emac", "dma_rx", "dma_tx";
+
+        interrupt-parent = <&rcpic3>;
+        interrupts = <0>, <1>;
+        interrupt-names = "rx", "tx";
+
+        clocks = <&iclk>;
+        clock-names = "mdioclk";
+    };

arch/mips/rb532/devices.c

@@ -58,37 +58,27 @@ EXPORT_SYMBOL(get_latch_u5);
 
 static struct resource korina_dev0_res[] = {
 	{
-		.name = "korina_regs",
+		.name = "emac",
 		.start = ETH0_BASE_ADDR,
 		.end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
 		.flags = IORESOURCE_MEM,
 	 }, {
-		.name = "korina_rx",
+		.name = "rx",
 		.start = ETH0_DMA_RX_IRQ,
 		.end = ETH0_DMA_RX_IRQ,
 		.flags = IORESOURCE_IRQ
 	}, {
-		.name = "korina_tx",
+		.name = "tx",
 		.start = ETH0_DMA_TX_IRQ,
 		.end = ETH0_DMA_TX_IRQ,
 		.flags = IORESOURCE_IRQ
 	}, {
-		.name = "korina_ovr",
-		.start = ETH0_RX_OVR_IRQ,
-		.end = ETH0_RX_OVR_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_und",
-		.start = ETH0_TX_UND_IRQ,
-		.end = ETH0_TX_UND_IRQ,
-		.flags = IORESOURCE_IRQ
-	}, {
-		.name = "korina_dma_rx",
+		.name = "dma_rx",
 		.start = ETH0_RX_DMA_ADDR,
 		.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
 		.flags = IORESOURCE_MEM,
 	 }, {
-		.name = "korina_dma_tx",
+		.name = "dma_tx",
 		.start = ETH0_TX_DMA_ADDR,
 		.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
 		.flags = IORESOURCE_MEM,
@@ -105,6 +95,9 @@ static struct platform_device korina_dev0 = {
 	.name = "korina",
 	.resource = korina_dev0_res,
 	.num_resources = ARRAY_SIZE(korina_dev0_res),
+	.dev = {
+		.platform_data = &korina_dev0_data.mac,
+	}
 };
 
 static struct resource cf_slot0_res[] = {
@@ -299,8 +292,6 @@ static int __init plat_setup_devices(void)
 	/* set the uart clock to the current cpu frequency */
 	rb532_uart_res[0].uartclk = idt_cpu_freq;
 
-	dev_set_drvdata(&korina_dev0.dev, &korina_dev0_data);
-
 	gpiod_add_lookup_table(&cf_slot0_gpio_table);
 	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
 }

drivers/net/ethernet/Kconfig

@@ -99,7 +99,8 @@ config JME
 
 config KORINA
 	tristate "Korina (IDT RC32434) Ethernet support"
-	depends on MIKROTIK_RB532
+	depends on MIKROTIK_RB532 || COMPILE_TEST
+	select MII
 	help
 	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
 	  based system say Y. Otherwise say N.