Commit a2ae8323 authored by Alexandre Belloni's avatar Alexandre Belloni

rtc: ds1685: fix possible race condition

The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
parent a0defd7c
......@@ -2037,6 +2037,22 @@ ds1685_rtc_probe(struct platform_device *pdev)
rtc->write(rtc, RTC_EXT_CTRL_4B,
(rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_KSE));
rtc_dev = devm_rtc_allocate_device(&pdev->dev);
if (IS_ERR(rtc_dev))
return PTR_ERR(rtc_dev);
rtc_dev->ops = &ds1685_rtc_ops;
/* Maximum periodic rate is 8192Hz (0.122070ms). */
rtc_dev->max_user_freq = RTC_MAX_USER_FREQ;
/* See if the platform doesn't support UIE. */
if (pdata->uie_unsupported)
rtc_dev->uie_unsupported = 1;
rtc->uie_unsupported = pdata->uie_unsupported;
rtc->dev = rtc_dev;
/*
* Fetch the IRQ and setup the interrupt handler.
*
......@@ -2069,32 +2085,13 @@ ds1685_rtc_probe(struct platform_device *pdev)
/* Setup complete. */
ds1685_rtc_switch_to_bank0(rtc);
/* Register the device as an RTC. */
rtc_dev = rtc_device_register(pdev->name, &pdev->dev,
&ds1685_rtc_ops, THIS_MODULE);
/* Success? */
if (IS_ERR(rtc_dev))
return PTR_ERR(rtc_dev);
/* Maximum periodic rate is 8192Hz (0.122070ms). */
rtc_dev->max_user_freq = RTC_MAX_USER_FREQ;
/* See if the platform doesn't support UIE. */
if (pdata->uie_unsupported)
rtc_dev->uie_unsupported = 1;
rtc->uie_unsupported = pdata->uie_unsupported;
rtc->dev = rtc_dev;
#ifdef CONFIG_SYSFS
ret = ds1685_rtc_sysfs_register(&pdev->dev);
if (ret)
rtc_device_unregister(rtc->dev);
return ret;
#endif
/* Done! */
return ret;
return rtc_register_device(rtc_dev);
}
/**
......@@ -2110,8 +2107,6 @@ ds1685_rtc_remove(struct platform_device *pdev)
ds1685_rtc_sysfs_unregister(&pdev->dev);
#endif
rtc_device_unregister(rtc->dev);
/* Read Ctrl B and clear PIE/AIE/UIE. */
rtc->write(rtc, RTC_CTRL_B,
(rtc->read(rtc, RTC_CTRL_B) &
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment