wl1251: fix filtering support

This driver has a hack in cmd.c which effectively disables all filtering.
This seems to be triggering a firmware bug where it stops reporting any
rx packets after random time on some routers, which is eliminated (or at
least appears much more rarely) when filtering is on.
I have found that only BSSID filter needs to be disabled for association
to work, so disable only that instead of all filtering.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ti/wl1251/cmd.c

@@ -277,15 +277,6 @@ int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 	join->rx_config_options = wl->rx_config;
 	join->rx_filter_options = wl->rx_filter;
 
-	/*
-	 * FIXME: disable temporarily all filters because after commit
-	 * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
-	 * association. The filter logic needs to be implemented properly
-	 * and once that is done, this hack can be removed.
-	 */
-	join->rx_config_options = 0;
-	join->rx_filter_options = WL1251_DEFAULT_RX_FILTER;
-
 	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
 		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
 

drivers/net/wireless/ti/wl1251/main.c

@@ -334,6 +334,12 @@ static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 	if (ret < 0)
 		goto out;
 
+	/*
+	 * Join command applies filters, and if we are not associated,
+	 * BSSID filter must be disabled for association to work.
+	 */
+	if (is_zero_ether_addr(wl->bssid))
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
 
 	ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
 			      dtim_period);