Commit a2ea21bb authored by Vojtech Pavlik's avatar Vojtech Pavlik

Merge http://linus.bkbits.net:8080/linux-2.5

into twilight.ucw.cz:/home/vojtech/bk/linus
parents 040a02c8 268c9783
...@@ -207,7 +207,7 @@ program reading the data wishes. You can set GPM and X to any of ...@@ -207,7 +207,7 @@ program reading the data wishes. You can set GPM and X to any of
these. You'll need ImPS/2 if you want to make use of a wheel on a USB these. You'll need ImPS/2 if you want to make use of a wheel on a USB
mouse and ExplorerPS/2 if you want to use extra (up to 5) buttons. mouse and ExplorerPS/2 if you want to use extra (up to 5) buttons.
3.2.3 joydev.c 3.2.3 joydev.o
~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~
Joydev implements v0.x and v1.x Linux joystick api, much like Joydev implements v0.x and v1.x Linux joystick api, much like
drivers/char/joystick/joystick.c used to in earlier versions. See drivers/char/joystick/joystick.c used to in earlier versions. See
......
usb-xpad - Linux USB driver for XBOX HID gamecontrollers xpad - Linux USB driver for X-Box gamepads
This is the very first release of a driver for XBOX gamecontrollers. This is the very first release of a driver for X-Box gamepads.
Basically, this was hacked away in just a few hours, so don't expect Basically, this was hacked away in just a few hours, so don't expect
miracles. miracles.
In particular, there is currently NO support for the rumble pack.
You won't find many ff-aware linux applications anyway.
0. Status 0. Status
--------- ---------
...@@ -14,31 +17,38 @@ The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) reports ...@@ -14,31 +17,38 @@ The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) reports
8 axes and 10 buttons. 8 axes and 10 buttons.
Alls 8 axes work, though they all have the same range (-32768..32767) Alls 8 axes work, though they all have the same range (-32768..32767)
and the zero-setting is not correct for the triggers. and the zero-setting is not correct for the triggers (I don't know if that
9 of the 10 buttons work (my black button does not work, though I can is some limitation of jstest, since the input device setup should be fine. I
see no reason for it not to), all of them are in digital mode, though didn't have a look at jstest itself yet).
(the six buttons on the right side are "analog" ones).
All of the 10 buttons work (in digital mode). The six buttons on the
right side (A, B, X, Y, black, white) are said to be "analog" and
report their values as 8 bit unsigned, not sure what this is good for.
I tested the controller with quake3, and configuration and
in game functionality were OK. However, I find it rather difficult to
play first person shooters with a pad. Your mileage may vary.
1. USB adapter 1. USB adapter
-------------- --------------
Before you can actually use the driver, you need to get yourself an Before you can actually use the driver, you need to get yourself an
adapter cable to connect the XBOX-controller to your Linux-Box. adapter cable to connect the X-Box controller to your Linux-Box.
Such a cable is pretty easy to build. The Controller itself is a USB device Such a cable is pretty easy to build. The Controller itself is a USB compound
(a hub with three ports; two expansion slots and the controller device) device (a hub with three ports for two expansion slots and the controller
with the only differnce in a nonstandard connector (5 pins vs. 4 on device) with the only difference in a nonstandard connector (5 pins vs. 4 on
standard USB connector). standard USB connector).
You just need to solder an USB connector onto the cable and keep the You just need to solder a USB connector onto the cable and keep the
yellow wire unconnected. The other pins have the same order on both yellow wire unconnected. The other pins have the same order on both
connectors so there no magic to it. Detailed info on these matters can be found connectors so there is no magic to it. Detailed info on these matters
on the net. can be found on the net ([1], [2], [3]).
Thanks to the trip splitter found on the cable you don't even need to cut the Thanks to the trip splitter found on the cable you don't even need to cut the
original cable, you can buy an extension cable and cut that instead. That way, original one. You can buy an extension cable and cut that instead. That way,
you can still use the controller with your XBOX, if you have one ;) you can still use the controller with your X-Box, if you have one ;)
2. driver installation 2. driver installation
...@@ -46,22 +56,26 @@ you can still use the controller with your XBOX, if you have one ;) ...@@ -46,22 +56,26 @@ you can still use the controller with your XBOX, if you have one ;)
Once you have the adapter cable and the controller is connected, you need Once you have the adapter cable and the controller is connected, you need
to load your USB subsystem and should cat /proc/bus/usb/devices. to load your USB subsystem and should cat /proc/bus/usb/devices.
There should be an entry like the one in InterAct_german.dump. There should be an entry like the one at the end [4].
Currently (as of version 0.0.4), the following three devices are included:
original Microsoft XBOX controller (US), vendor=0x045e, product=0x0202
original Microsoft XBOX controller (Japan), vendor=0x045e, product=0x0285
InterAct PowerPad Pro (Germany), vendor=0x05fd, product=0x107a
Don't worry if the vendor and/or product ID don't match, those are easy to If you have another controller that is not listed above and is not recognized
add to the driver. You could do it yourself, just add the appropriate line by the driver, please drop me a line with the appropriate info (that is, include
into the list after the line the name, vendor and product ID, as well as the country where you bought it;
'} xpad_device[] = {' sending the whole dump out of /proc/bus/usb/devices along would be even better).
, but before the line that says
'{ 0x0000, 0x0000, "unknown...." }'.
In theory, the driver should work with other controllers than mine In theory, the driver should work with other controllers than mine
(InterAct PowerPad pro, bought in Germany) just fine, but see for yourself. (InterAct PowerPad pro, bought in Germany) just fine, but I cannot test this
for I only have this one controller.
If you compiled and installed the driver, test the functionality: If you compiled and installed the driver, test the functionality:
> modprobe usb-xpad > modprobe xpad
> modprobe joydev > modprobe joydev
> jstest /dev/input/js0 > jstest /dev/js0
There should be a single line showing 18 inputs (8 axes, 10 buttons), and There should be a single line showing 18 inputs (8 axes, 10 buttons), and
it's values should change if you move the sticks and push the buttons. it's values should change if you move the sticks and push the buttons.
...@@ -76,9 +90,27 @@ I have to thank ITO Takayuki for the detailed info on his site ...@@ -76,9 +90,27 @@ I have to thank ITO Takayuki for the detailed info on his site
http://euc.jp/periphs/xbox-controller.ja.html. http://euc.jp/periphs/xbox-controller.ja.html.
His useful info and both the usb-skeleton as well as the iforce input driver His useful info and both the usb-skeleton as well as the iforce input driver
helped a lot in rapid prototyping the basic functionality. (Greg Kroah-Hartmann; Vojtech Pavlik) helped a lot in rapid prototyping
the basic functionality.
4. References
-------------
1. http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
2. http://xpad.xbox-scene.com/
3. http://www.xboxhackz.com/Hackz-Reference.htm
4. /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany):
T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1
P: Vendor=05fd ProdID=107a Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms
E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms
-- --
Marko Friedemann <mfr@bmx-chemnitz.de> Marko Friedemann <mfr@bmx-chemnitz.de>
2002-07-02 2002-07-16
...@@ -6,7 +6,6 @@ O_TARGET := 4xx_io.o ...@@ -6,7 +6,6 @@ O_TARGET := 4xx_io.o
#obj-y := #obj-y :=
obj-$(CONFIG_STB_KB) += stb_kb.o
obj-$(CONFIG_SERIAL_SICC) += serial_sicc.o obj-$(CONFIG_SERIAL_SICC) += serial_sicc.o
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
/*
* arch/ppc/4xx_io/stb_kb.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/config.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/mm.h>
#include <linux/signal.h>
#include <linux/init.h>
#include <linux/kbd_ll.h>
#include <linux/delay.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/kbd_kern.h>
/* the following are borrowed from pc_keyb.c, thanks to those involved! */
/*
* Translation of escaped scancodes to keycodes.
* This is now user-settable.
* The keycodes 1-88,96-111,119 are fairly standard, and
* should probably not be changed - changing might confuse X.
* X also interprets scancode 0x5d (KEY_Begin).
*
* For 1-88 keycode equals scancode.
*/
#define E0_KPENTER 96
#define E0_RCTRL 97
#define E0_KPSLASH 98
#define E0_PRSCR 99
#define E0_RALT 100
#define E0_BREAK 101 /* (control-pause) */
#define E0_HOME 102
#define E0_UP 103
#define E0_PGUP 104
#define E0_LEFT 105
#define E0_RIGHT 106
#define E0_END 107
#define E0_DOWN 108
#define E0_PGDN 109
#define E0_INS 110
#define E0_DEL 111
#define E1_PAUSE 119
/*
* The keycodes below are randomly located in 89-95,112-118,120-127.
* They could be thrown away (and all occurrences below replaced by 0),
* but that would force many users to use the `setkeycodes' utility, where
* they needed not before. It does not matter that there are duplicates, as
* long as no duplication occurs for any single keyboard.
*/
#define SC_LIM 89
#define FOCUS_PF1 85 /* actual code! */
#define FOCUS_PF2 89
#define FOCUS_PF3 90
#define FOCUS_PF4 91
#define FOCUS_PF5 92
#define FOCUS_PF6 93
#define FOCUS_PF7 94
#define FOCUS_PF8 95
#define FOCUS_PF9 120
#define FOCUS_PF10 121
#define FOCUS_PF11 122
#define FOCUS_PF12 123
#define JAP_86 124
/* tfj@olivia.ping.dk:
* The four keys are located over the numeric keypad, and are
* labelled A1-A4. It's an rc930 keyboard, from
* Regnecentralen/RC International, Now ICL.
* Scancodes: 59, 5a, 5b, 5c.
*/
#define RGN1 124
#define RGN2 125
#define RGN3 126
#define RGN4 127
static unsigned char high_keys[128 - SC_LIM] = {
RGN1, RGN2, RGN3, RGN4, 0, 0, 0, /* 0x59-0x5f */
0, 0, 0, 0, 0, 0, 0, 0, /* 0x60-0x67 */
0, 0, 0, 0, 0, FOCUS_PF11, 0, FOCUS_PF12, /* 0x68-0x6f */
0, 0, 0, FOCUS_PF2, FOCUS_PF9, 0, 0, FOCUS_PF3, /* 0x70-0x77 */
FOCUS_PF4, FOCUS_PF5, FOCUS_PF6, FOCUS_PF7, /* 0x78-0x7b */
FOCUS_PF8, JAP_86, FOCUS_PF10, 0 /* 0x7c-0x7f */
};
/* BTC */
#define E0_MACRO 112
/* LK450 */
#define E0_F13 113
#define E0_F14 114
#define E0_HELP 115
#define E0_DO 116
#define E0_F17 117
#define E0_KPMINPLUS 118
/*
* My OmniKey generates e0 4c for the "OMNI" key and the
* right alt key does nada. [kkoller@nyx10.cs.du.edu]
*/
#define E0_OK 124
/*
* New microsoft keyboard is rumoured to have
* e0 5b (left window button), e0 5c (right window button),
* e0 5d (menu button). [or: LBANNER, RBANNER, RMENU]
* [or: Windows_L, Windows_R, TaskMan]
*/
#define E0_MSLW 125
#define E0_MSRW 126
#define E0_MSTM 127
static unsigned char e0_keys[128] = {
0, 0, 0, 0, 0, 0, 0, 0, /* 0x00-0x07 */
0, 0, 0, 0, 0, 0, 0, 0, /* 0x08-0x0f */
0, 0, 0, 0, 0, 0, 0, 0, /* 0x10-0x17 */
0, 0, 0, 0, E0_KPENTER, E0_RCTRL, 0, 0, /* 0x18-0x1f */
0, 0, 0, 0, 0, 0, 0, 0, /* 0x20-0x27 */
0, 0, 0, 0, 0, 0, 0, 0, /* 0x28-0x2f */
0, 0, 0, 0, 0, E0_KPSLASH, 0, E0_PRSCR, /* 0x30-0x37 */
E0_RALT, 0, 0, 0, 0, E0_F13, E0_F14, E0_HELP, /* 0x38-0x3f */
E0_DO, E0_F17, 0, 0, 0, 0, E0_BREAK, E0_HOME, /* 0x40-0x47 */
E0_UP, E0_PGUP, 0, E0_LEFT, E0_OK, E0_RIGHT, E0_KPMINPLUS, E0_END,/* 0x48-0x4f */
E0_DOWN, E0_PGDN, E0_INS, E0_DEL, 0, 0, 0, 0, /* 0x50-0x57 */
0, 0, 0, E0_MSLW, E0_MSRW, E0_MSTM, 0, 0, /* 0x58-0x5f */
0, 0, 0, 0, 0, 0, 0, 0, /* 0x60-0x67 */
0, 0, 0, 0, 0, 0, 0, E0_MACRO, /* 0x68-0x6f */
0, 0, 0, 0, 0, 0, 0, 0, /* 0x70-0x77 */
0, 0, 0, 0, 0, 0, 0, 0 /* 0x78-0x7f */
};
void __init rawirkbd_init_hw(void) {
}
/*
int rawirkbd_setkeycode(unsigned int scancode, unsigned int keycode)
{
return -EINVAL;
}
int rawirkbd_getkeycode(unsigned int scancode)
{
return -EINVAL;
}
*/
int rawirkbd_setkeycode(unsigned int scancode, unsigned int keycode)
{
if (scancode < SC_LIM || scancode > 255 || keycode > 127)
return -EINVAL;
if (scancode < 128)
high_keys[scancode - SC_LIM] = keycode;
else
e0_keys[scancode - 128] = keycode;
return 0;
}
int rawirkbd_getkeycode(unsigned int scancode)
{
return
(scancode < SC_LIM || scancode > 255) ? -EINVAL :
(scancode < 128) ? high_keys[scancode - SC_LIM] :
e0_keys[scancode - 128];
}
int rawirkbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode)
{
static int prev_scancode = 0;
/* special prefix scancodes.. */
if (scancode == 0xe0 || scancode == 0xe1) {
prev_scancode = scancode;
return 0;
}
/* 0xFF is sent by a few keyboards, ignore it. 0x00 is error */
if (scancode == 0x00 || scancode == 0xff) {
prev_scancode = 0;
return 0;
}
scancode &= 0x7f;
if (prev_scancode) {
/*
* usually it will be 0xe0, but a Pause key generates
* e1 1d 45 e1 9d c5 when pressed, and nothing when released
*/
if (prev_scancode != 0xe0) {
if (prev_scancode == 0xe1 && scancode == 0x1d) {
prev_scancode = 0x100;
return 0;
} else if (prev_scancode == 0x100 && scancode == 0x45) {
*keycode = E1_PAUSE;
prev_scancode = 0;
} else {
#ifdef KBD_REPORT_UNKN
if (!raw_mode)
printk(KERN_INFO "keyboard: unknown e1 escape sequence\n");
#endif
prev_scancode = 0;
return 0;
}
} else {
prev_scancode = 0;
/*
* The keyboard maintains its own internal caps lock and
* num lock statuses. In caps lock mode E0 AA precedes make
* code and E0 2A follows break code. In num lock mode,
* E0 2A precedes make code and E0 AA follows break code.
* We do our own book-keeping, so we will just ignore these.
*/
/*
* For my keyboard there is no caps lock mode, but there are
* both Shift-L and Shift-R modes. The former mode generates
* E0 2A / E0 AA pairs, the latter E0 B6 / E0 36 pairs.
* So, we should also ignore the latter. - aeb@cwi.nl
*/
if (scancode == 0x2a || scancode == 0x36)
return 0;
if (e0_keys[scancode])
*keycode = e0_keys[scancode];
else {
#ifdef KBD_REPORT_UNKN
if (!raw_mode)
printk(KERN_INFO "keyboard: unknown scancode e0 %02x\n",
scancode);
#endif
return 0;
}
}
} else if (scancode >= SC_LIM) {
/* This happens with the FOCUS 9000 keyboard
Its keys PF1..PF12 are reported to generate
55 73 77 78 79 7a 7b 7c 74 7e 6d 6f
Moreover, unless repeated, they do not generate
key-down events, so we have to zero up_flag below */
/* Also, Japanese 86/106 keyboards are reported to
generate 0x73 and 0x7d for \ - and \ | respectively. */
/* Also, some Brazilian keyboard is reported to produce
0x73 and 0x7e for \ ? and KP-dot, respectively. */
*keycode = high_keys[scancode - SC_LIM];
if (!*keycode) {
if (!raw_mode) {
#ifdef KBD_REPORT_UNKN
printk(KERN_INFO "keyboard: unrecognized scancode (%02x)"
" - ignored\n", scancode);
#endif
}
return 0;
}
} else
*keycode = scancode;
return 1;
}
char rawirkbd_unexpected_up(unsigned char keycode)
{
/* unexpected, but this can happen: maybe this was a key release for a
FOCUS 9000 PF key; if we want to see it, we have to clear up_flag */
if (keycode >= SC_LIM || keycode == 85)
return 0;
else
return 0200;
}
#include <asm/machdep.h>
void redwood_irkb_init(void)
{
extern struct machdep_calls ppc_md;
ppc_md.kbd_translate = rawirkbd_translate;
ppc_md.kbd_unexpected_up = rawirkbd_unexpected_up;
}
...@@ -3103,19 +3103,3 @@ static int __init serial_console_setup(struct console *co, char *options) ...@@ -3103,19 +3103,3 @@ static int __init serial_console_setup(struct console *co, char *options)
return 0; return 0;
} }
#ifdef CONFIG_INPUT_KEYBDEV
void handle_scancode(unsigned char scancode, int down)
{
printk("handle_scancode(scancode=0x%x, down=%d)\n", scancode, down);
}
static void kbd_bh(unsigned long dummy)
{
}
DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
void (*kbd_ledfunc)(unsigned int led);
#endif
...@@ -36,7 +36,6 @@ ...@@ -36,7 +36,6 @@
#include <asm/amigahw.h> #include <asm/amigahw.h>
#include <asm/amigaints.h> #include <asm/amigaints.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/io.h> #include <asm/io.h>
...@@ -76,9 +75,6 @@ static char amiga_model_name[13] = "Amiga "; ...@@ -76,9 +75,6 @@ static char amiga_model_name[13] = "Amiga ";
extern char m68k_debug_device[]; extern char m68k_debug_device[];
static void amiga_sched_init(void (*handler)(int, void *, struct pt_regs *)); static void amiga_sched_init(void (*handler)(int, void *, struct pt_regs *));
/* amiga specific keyboard functions */
extern int amiga_keyb_init(void);
extern int amiga_kbdrate (struct kbd_repeat *);
/* amiga specific irq functions */ /* amiga specific irq functions */
extern void amiga_init_IRQ (void); extern void amiga_init_IRQ (void);
extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *); extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *);
...@@ -119,18 +115,6 @@ static struct console amiga_console_driver = { ...@@ -119,18 +115,6 @@ static struct console amiga_console_driver = {
index: -1, index: -1,
}; };
#ifdef CONFIG_MAGIC_SYSRQ
char amiga_sysrq_xlate[128] =
"\0001234567890-=\\\000\000" /* 0x00 - 0x0f */
"qwertyuiop[]\000123" /* 0x10 - 0x1f */
"asdfghjkl;'\000\000456" /* 0x20 - 0x2f */
"\000zxcvbnm,./\000+789" /* 0x30 - 0x3f */
" \177\t\r\r\000\177\000\000\000-\000\000\000\000\000" /* 0x40 - 0x4f */
"\000\201\202\203\204\205\206\207\210\211()/*+\000" /* 0x50 - 0x5f */
"\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" /* 0x60 - 0x6f */
"\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"; /* 0x70 - 0x7f */
#endif
extern void (*kd_mksound)(unsigned int, unsigned int); extern void (*kd_mksound)(unsigned int, unsigned int);
...@@ -407,8 +391,6 @@ void __init config_amiga(void) ...@@ -407,8 +391,6 @@ void __init config_amiga(void)
request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]); request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
mach_sched_init = amiga_sched_init; mach_sched_init = amiga_sched_init;
mach_keyb_init = amiga_keyb_init;
mach_kbdrate = amiga_kbdrate;
mach_init_IRQ = amiga_init_IRQ; mach_init_IRQ = amiga_init_IRQ;
#ifndef CONFIG_APUS #ifndef CONFIG_APUS
mach_default_handler = &amiga_default_handler; mach_default_handler = &amiga_default_handler;
......
...@@ -575,7 +575,6 @@ if [ "$CONFIG_40x" = "y" ]; then ...@@ -575,7 +575,6 @@ if [ "$CONFIG_40x" = "y" ]; then
mainmenu_option next_comment mainmenu_option next_comment
comment 'IBM 40x options' comment 'IBM 40x options'
if [ "$CONFIG_STB03xxx" = "y" ]; then if [ "$CONFIG_STB03xxx" = "y" ]; then
bool 'STB IR Keyboard' CONFIG_STB_KB
bool 'SICC Serial port' CONFIG_SERIAL_SICC bool 'SICC Serial port' CONFIG_SERIAL_SICC
if [ "$CONFIG_SERIAL_SICC" = "y" -a "$CONFIG_UART0_TTYS1" = "y" ]; then if [ "$CONFIG_SERIAL_SICC" = "y" -a "$CONFIG_UART0_TTYS1" = "y" ]; then
define_bool CONFIG_UART1_DFLT_CONSOLE y define_bool CONFIG_UART1_DFLT_CONSOLE y
......
...@@ -345,12 +345,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ...@@ -345,12 +345,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.progress = ppc4xx_progress; ppc_md.progress = ppc4xx_progress;
#endif #endif
#if defined(CONFIG_VT) && defined(CONFIG_PC_KEYBOARD)
#if defined(CONFIG_REDWOOD_4) && defined(CONFIG_STB_KB)
redwood_irkb_init();
#endif
#endif
/* /*
** m8xx_setup.c, prep_setup.c use ** m8xx_setup.c, prep_setup.c use
** defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ** defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
......
...@@ -34,7 +34,6 @@ ...@@ -34,7 +34,6 @@
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/keyboard.h>
#include <asm/time.h> #include <asm/time.h>
unsigned long m68k_machtype; unsigned long m68k_machtype;
...@@ -42,16 +41,9 @@ char debug_device[6] = ""; ...@@ -42,16 +41,9 @@ char debug_device[6] = "";
extern void amiga_init_IRQ(void); extern void amiga_init_IRQ(void);
extern int amiga_kbd_translate(unsigned char keycode, unsigned char *keycodep, char raw_mode);
extern char amiga_sysrq_xlate[128];
extern void apus_setup_pci_ptrs(void); extern void apus_setup_pci_ptrs(void);
void (*mach_sched_init) (void (*handler)(int, void *, struct pt_regs *)) __initdata = NULL; void (*mach_sched_init) (void (*handler)(int, void *, struct pt_regs *)) __initdata = NULL;
/* machine dependent keyboard functions */
int (*mach_keyb_init) (void) __initdata = NULL;
int (*mach_kbdrate) (struct kbd_repeat *) = NULL;
void (*mach_kbd_leds) (unsigned int) = NULL;
/* machine dependent irq functions */ /* machine dependent irq functions */
void (*mach_init_IRQ) (void) __initdata = NULL; void (*mach_init_IRQ) (void) __initdata = NULL;
void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL; void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL;
...@@ -562,32 +554,6 @@ void apus_end_irq(unsigned int irq) ...@@ -562,32 +554,6 @@ void apus_end_irq(unsigned int irq)
APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|ipl_emu); APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|ipl_emu);
} }
/****************************************************** keyboard */
static int apus_kbd_setkeycode(unsigned int scancode, unsigned int keycode)
{
return -EOPNOTSUPP;
}
static int apus_kbd_getkeycode(unsigned int scancode)
{
return scancode > 127 ? -EINVAL : scancode;
}
static char apus_kbd_unexpected_up(unsigned char keycode)
{
return 0200;
}
static void apus_kbd_init_hw(void)
{
#ifdef CONFIG_APUS
extern int amiga_keyb_init(void);
amiga_keyb_init();
#endif
}
/****************************************************** debugging */ /****************************************************** debugging */
/* some serial hardware definitions */ /* some serial hardware definitions */
...@@ -851,9 +817,4 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ...@@ -851,9 +817,4 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.find_end_of_memory = apus_find_end_of_memory; ppc_md.find_end_of_memory = apus_find_end_of_memory;
ppc_md.setup_io_mappings = apus_map_io; ppc_md.setup_io_mappings = apus_map_io;
/* These should not be used for the APUS yet, since it uses
the M68K keyboard now. */
ppc_md.kbd_translate = amiga_kbd_translate;
ppc_md.kbd_unexpected_up = apus_kbd_unexpected_up;
} }
...@@ -50,7 +50,6 @@ ...@@ -50,7 +50,6 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/hydra.h> #include <asm/hydra.h>
#include <asm/keyboard.h>
#include <asm/sections.h> #include <asm/sections.h>
#include <asm/time.h> #include <asm/time.h>
#include <asm/btext.h> #include <asm/btext.h>
......
...@@ -63,7 +63,6 @@ ...@@ -63,7 +63,6 @@
#include <asm/mk48t59.h> #include <asm/mk48t59.h>
#include <asm/prep_nvram.h> #include <asm/prep_nvram.h>
#include <asm/raven.h> #include <asm/raven.h>
#include <asm/keyboard.h>
#include <asm/vga.h> #include <asm/vga.h>
#include <asm/time.h> #include <asm/time.h>
......
...@@ -55,7 +55,6 @@ ...@@ -55,7 +55,6 @@
#include <asm/mk48t59.h> #include <asm/mk48t59.h>
#include <asm/prep_nvram.h> #include <asm/prep_nvram.h>
#include <asm/raven.h> #include <asm/raven.h>
#include <asm/keyboard.h>
#include <asm/vga.h> #include <asm/vga.h>
#include <asm/time.h> #include <asm/time.h>
#include <asm/mpc10x.h> #include <asm/mpc10x.h>
......
...@@ -45,22 +45,3 @@ void __init ...@@ -45,22 +45,3 @@ void __init
board_init(void) board_init(void)
{ {
} }
/* hack; blame me dan. -brad */
#ifdef CONFIG_INPUT_KEYBDEV
void
handle_scancode(unsigned char scancode, int down)
{
printk("handle_scancode(scancode=0x%x, down=%d)\n", scancode, down);
}
static void
kbd_bh(unsigned long dummy)
{
}
DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
void (*kbd_ledfunc) (unsigned int led);
#endif
...@@ -83,7 +83,6 @@ ...@@ -83,7 +83,6 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/prom.h> #include <asm/prom.h>
#include <asm/smp.h> #include <asm/smp.h>
#include <asm/keyboard.h>
#include <asm/vga.h> #include <asm/vga.h>
#include <asm/open_pic.h> #include <asm/open_pic.h>
#include <asm/i8259.h> #include <asm/i8259.h>
......
...@@ -58,16 +58,5 @@ ...@@ -58,16 +58,5 @@
#define SPRUCE_NVRAM_BASE_ADDR 0xff800000 #define SPRUCE_NVRAM_BASE_ADDR 0xff800000
#define SPRUCE_RTC_BASE_ADDR SPRUCE_NVRAM_BASE_ADDR #define SPRUCE_RTC_BASE_ADDR SPRUCE_NVRAM_BASE_ADDR
#define KEYBOARD_IRQ 22
#define AUX_IRQ 21
unsigned char spruce_read_keyb_data(void);
unsigned char spruce_read_keyb_status(void);
#define kbd_read_input spruce_read_keyb_data
#define kbd_read_status spruce_read_keyb_status
#define kbd_write_output(val) *((unsigned char *)0xff810000) = (char)val
#define kbd_write_command(val) *((unsigned char *)0xff810001) = (char)val
#endif /* __ASM_SPRUCE_H__ */ #endif /* __ASM_SPRUCE_H__ */
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
...@@ -46,7 +46,6 @@ ...@@ -46,7 +46,6 @@
#include <linux/ide.h> #include <linux/ide.h>
#include <linux/root_dev.h> #include <linux/root_dev.h>
#include <asm/keyboard.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/page.h> #include <asm/page.h>
...@@ -201,49 +200,6 @@ spruce_map_io(void) ...@@ -201,49 +200,6 @@ spruce_map_io(void)
0x08000000, _PAGE_IO); 0x08000000, _PAGE_IO);
} }
unsigned char spruce_read_keyb_status(void)
{
unsigned long kbd_status;
__raw_writel(0x00000088, 0xff500008);
eieio();
__raw_writel(0x03000000, 0xff50000c);
eieio();
asm volatile(" lis 7,0xff88 \n
ori 7,7,0x8 \n
lswi 6,7,0x8 \n
mr %0,6 \n"
: "=r" (kbd_status) :: "6", "7");
__raw_writel(0x00000000, 0xff50000c);
eieio();
return (unsigned char)(kbd_status >> 24);
}
unsigned char spruce_read_keyb_data(void)
{
unsigned long kbd_data;
__raw_writel(0x00000088, 0xff500008);
eieio();
__raw_writel(0x03000000, 0xff50000c);
eieio();
asm volatile(" lis 7,0xff88 \n
lswi 6,7,0x8 \n
mr %0,6 \n"
: "=r" (kbd_data) :: "6", "7");
__raw_writel(0x00000000, 0xff50000c);
eieio();
return (unsigned char)(kbd_data >> 24);
}
void __init void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5, platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7) unsigned long r6, unsigned long r7)
......
...@@ -45,6 +45,8 @@ ...@@ -45,6 +45,8 @@
#include <asm/todc.h> #include <asm/todc.h>
#endif #endif
#include "walnut.h"
#undef DEBUG #undef DEBUG
#ifdef DEBUG #ifdef DEBUG
...@@ -82,9 +84,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) ...@@ -82,9 +84,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
void __init void __init
board_setup_arch(void) board_setup_arch(void)
{ {
#define WALNUT_PS2_BASE 0xF0100000
#define WALNUT_FPGA_BASE 0xF0300000
void *fpga_brdc; void *fpga_brdc;
unsigned char fpga_brdc_data; unsigned char fpga_brdc_data;
void *fpga_enable; void *fpga_enable;
......
...@@ -73,14 +73,6 @@ extern void *walnut_rtc_base; ...@@ -73,14 +73,6 @@ extern void *walnut_rtc_base;
#define WALNUT_PS2_BASE 0xF0100000 #define WALNUT_PS2_BASE 0xF0100000
#define WALNUT_FPGA_BASE 0xF0300000 #define WALNUT_FPGA_BASE 0xF0300000
extern void *kb_cs;
extern void *kb_data;
#define kbd_read_input() readb(kb_data)
#define kbd_read_status() readb(kb_cs)
#define kbd_write_output(val) writeb(val, kb_data)
#define kbd_write_command(val) writeb(val, kb_cs)
#define PPC4xx_MACHINE_NAME "IBM Walnut" #define PPC4xx_MACHINE_NAME "IBM Walnut"
#endif /* !__ASSEMBLY__ */ #endif /* !__ASSEMBLY__ */
......
...@@ -233,6 +233,7 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ...@@ -233,6 +233,7 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
struct evdev_list *list = file->private_data; struct evdev_list *list = file->private_data;
struct evdev *evdev = list->evdev; struct evdev *evdev = list->evdev;
struct input_dev *dev = evdev->handle.dev; struct input_dev *dev = evdev->handle.dev;
struct input_devinfo id;
int retval, t, u; int retval, t, u;
if (!evdev->exist) return -ENODEV; if (!evdev->exist) return -ENODEV;
...@@ -243,11 +244,12 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ...@@ -243,11 +244,12 @@ static int evdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
return put_user(EV_VERSION, (int *) arg); return put_user(EV_VERSION, (int *) arg);
case EVIOCGID: case EVIOCGID:
if ((retval = put_user(dev->idbus, ((short *) arg) + 0))) return retval; id.bustype = dev->id.bustype;
if ((retval = put_user(dev->idvendor, ((short *) arg) + 1))) return retval; id.vendor = dev->id.vendor;
if ((retval = put_user(dev->idproduct, ((short *) arg) + 2))) return retval; id.product = dev->id.product;
if ((retval = put_user(dev->idversion, ((short *) arg) + 3))) return retval; id.version = dev->id.version;
return 0; return copy_to_user((void *) arg, &id, sizeof(struct input_devinfo));
case EVIOCGREP: case EVIOCGREP:
if ((retval = put_user(dev->rep[0], ((int *) arg) + 0))) return retval; if ((retval = put_user(dev->rep[0], ((int *) arg) + 0))) return retval;
......
...@@ -291,9 +291,9 @@ static int __devinit cs461x_pci_probe(struct pci_dev *pdev, const struct pci_dev ...@@ -291,9 +291,9 @@ static int __devinit cs461x_pci_probe(struct pci_dev *pdev, const struct pci_dev
port->name = name; port->name = name;
port->phys = phys; port->phys = phys;
port->idbus = BUS_PCI; port->id.bustype = BUS_PCI;
port->idvendor = pdev->vendor; port->id.vendor = pdev->vendor;
port->idproduct = pdev->device; port->id.product = pdev->device;
cs461x_pokeBA0(BA0_JSIO, 0xFF); // ? cs461x_pokeBA0(BA0_JSIO, 0xFF); // ?
cs461x_pokeBA0(BA0_JSCTL, JSCTL_SP_MEDIUM_SLOW); cs461x_pokeBA0(BA0_JSCTL, JSCTL_SP_MEDIUM_SLOW);
......
...@@ -87,9 +87,9 @@ static int __devinit emu_probe(struct pci_dev *pdev, const struct pci_device_id ...@@ -87,9 +87,9 @@ static int __devinit emu_probe(struct pci_dev *pdev, const struct pci_device_id
emu->gameport.io = ioport; emu->gameport.io = ioport;
emu->gameport.name = pdev->name; emu->gameport.name = pdev->name;
emu->gameport.phys = emu->phys; emu->gameport.phys = emu->phys;
emu->gameport.idbus = BUS_PCI; emu->gameport.id.bustype = BUS_PCI;
emu->gameport.idvendor = pdev->vendor; emu->gameport.id.vendor = pdev->vendor;
emu->gameport.idproduct = pdev->device; emu->gameport.id.product = pdev->device;
pci_set_drvdata(pdev, emu); pci_set_drvdata(pdev, emu);
......
...@@ -105,9 +105,9 @@ static int __devinit fm801_gp_probe(struct pci_dev *pci, const struct pci_device ...@@ -105,9 +105,9 @@ static int __devinit fm801_gp_probe(struct pci_dev *pci, const struct pci_device
gp->gameport.phys = gp->phys; gp->gameport.phys = gp->phys;
gp->gameport.name = gp->name; gp->gameport.name = gp->name;
gp->gameport.idbus = BUS_PCI; gp->gameport.id.bustype = BUS_PCI;
gp->gameport.idvendor = pci->vendor; gp->gameport.id.vendor = pci->vendor;
gp->gameport.idproduct = pci->device; gp->gameport.id.product = pci->device;
pci_set_drvdata(pci, gp); pci_set_drvdata(pci, gp);
......
...@@ -259,7 +259,7 @@ int __init l4_init(void) ...@@ -259,7 +259,7 @@ int __init l4_init(void)
gameport->name = l4_name; gameport->name = l4_name;
gameport->phys = l4->phys; gameport->phys = l4->phys;
gameport->idbus = BUS_ISA; gameport->id.bustype = BUS_ISA;
if (!i && !j) if (!i && !j)
gameport->io = L4_PORT; gameport->io = L4_PORT;
......
...@@ -144,7 +144,7 @@ static struct ns558* ns558_isa_probe(int io, struct ns558 *next) ...@@ -144,7 +144,7 @@ static struct ns558* ns558_isa_probe(int io, struct ns558 *next)
port->gameport.io = io & (-1 << i); port->gameport.io = io & (-1 << i);
port->gameport.phys = port->phys; port->gameport.phys = port->phys;
port->gameport.name = port->name; port->gameport.name = port->name;
port->gameport.idbus = BUS_ISA; port->gameport.id.bustype = BUS_ISA;
sprintf(port->phys, "isa%04x/gameport0", io & (-1 << i)); sprintf(port->phys, "isa%04x/gameport0", io & (-1 << i));
sprintf(port->name, "NS558 ISA"); sprintf(port->name, "NS558 ISA");
...@@ -232,10 +232,10 @@ static struct ns558* ns558_pnp_probe(struct pci_dev *dev, struct ns558 *next) ...@@ -232,10 +232,10 @@ static struct ns558* ns558_pnp_probe(struct pci_dev *dev, struct ns558 *next)
port->gameport.io = ioport; port->gameport.io = ioport;
port->gameport.phys = port->phys; port->gameport.phys = port->phys;
port->gameport.name = port->name; port->gameport.name = port->name;
port->gameport.idbus = BUS_ISAPNP; port->gameport.id.bustype = BUS_ISAPNP;
port->gameport.idvendor = dev->vendor; port->gameport.id.vendor = dev->vendor;
port->gameport.idproduct = dev->device; port->gameport.id.product = dev->device;
port->gameport.idversion = 0x100; port->gameport.id.version = 0x100;
sprintf(port->phys, "isapnp%d.%d/gameport0", PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); sprintf(port->phys, "isapnp%d.%d/gameport0", PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
sprintf(port->name, "%s", dev->name[0] ? dev->name : "NS558 PnP Gameport"); sprintf(port->name, "%s", dev->name[0] ? dev->name : "NS558 PnP Gameport");
......
...@@ -129,9 +129,9 @@ static int __devinit vortex_probe(struct pci_dev *dev, const struct pci_device_i ...@@ -129,9 +129,9 @@ static int __devinit vortex_probe(struct pci_dev *dev, const struct pci_device_i
vortex->gameport.name = dev->name; vortex->gameport.name = dev->name;
vortex->gameport.phys = vortex->phys; vortex->gameport.phys = vortex->phys;
vortex->gameport.idbus = BUS_PCI; vortex->gameport.id.bustype = BUS_PCI;
vortex->gameport.idvendor = dev->vendor; vortex->gameport.id.vendor = dev->vendor;
vortex->gameport.idproduct = dev->device; vortex->gameport.id.product = dev->device;
for (i = 0; i < 6; i++) for (i = 0; i < 6; i++)
if (~pci_resource_flags(dev, i) & IORESOURCE_IO) if (~pci_resource_flags(dev, i) & IORESOURCE_IO)
......
...@@ -290,19 +290,19 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st ...@@ -290,19 +290,19 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
for (; id->flags || id->driver_info; id++) { for (; id->flags || id->driver_info; id++) {
if (id->flags & INPUT_DEVICE_ID_MATCH_BUS) if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
if (id->idbus != dev->idbus) if (id->id.bustype != dev->id.bustype)
continue; continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR) if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
if (id->idvendor != dev->idvendor) if (id->id.vendor != dev->id.vendor)
continue; continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT) if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
if (id->idproduct != dev->idproduct) if (id->id.product != dev->id.product)
continue; continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_BUS) if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
if (id->idversion != dev->idversion) if (id->id.version != dev->id.version)
continue; continue;
MATCH_BIT(evbit, EV_MAX); MATCH_BIT(evbit, EV_MAX);
...@@ -395,7 +395,7 @@ static void input_call_hotplug(char *verb, struct input_dev *dev) ...@@ -395,7 +395,7 @@ static void input_call_hotplug(char *verb, struct input_dev *dev)
envp[i++] = scratch; envp[i++] = scratch;
scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x", scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x",
dev->idbus, dev->idvendor, dev->idproduct, dev->idversion) + 1; dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1;
if (dev->name) { if (dev->name) {
envp[i++] = scratch; envp[i++] = scratch;
...@@ -710,7 +710,7 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int ...@@ -710,7 +710,7 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int
while (dev) { while (dev) {
len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n", len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
dev->idbus, dev->idvendor, dev->idproduct, dev->idversion); dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version);
len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : ""); len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : ""); len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
......
...@@ -336,10 +336,10 @@ static void a3d_connect(struct gameport *gameport, struct gameport_dev *dev) ...@@ -336,10 +336,10 @@ static void a3d_connect(struct gameport *gameport, struct gameport_dev *dev)
a3d->adc.name = a3d_names[a3d->mode]; a3d->adc.name = a3d_names[a3d->mode];
a3d->adc.phys = a3d->adcphys; a3d->adc.phys = a3d->adcphys;
a3d->adc.idbus = BUS_GAMEPORT; a3d->adc.id.bustype = BUS_GAMEPORT;
a3d->adc.idvendor = GAMEPORT_ID_VENDOR_MADCATZ; a3d->adc.id.vendor = GAMEPORT_ID_VENDOR_MADCATZ;
a3d->adc.idproduct = a3d->mode; a3d->adc.id.product = a3d->mode;
a3d->adc.idversion = 0x0100; a3d->adc.id.version = 0x0100;
a3d_read(a3d, data); a3d_read(a3d, data);
...@@ -353,10 +353,10 @@ static void a3d_connect(struct gameport *gameport, struct gameport_dev *dev) ...@@ -353,10 +353,10 @@ static void a3d_connect(struct gameport *gameport, struct gameport_dev *dev)
a3d->dev.name = a3d_names[a3d->mode]; a3d->dev.name = a3d_names[a3d->mode];
a3d->dev.phys = a3d->phys; a3d->dev.phys = a3d->phys;
a3d->dev.idbus = BUS_GAMEPORT; a3d->dev.id.bustype = BUS_GAMEPORT;
a3d->dev.idvendor = GAMEPORT_ID_VENDOR_MADCATZ; a3d->dev.id.vendor = GAMEPORT_ID_VENDOR_MADCATZ;
a3d->dev.idproduct = a3d->mode; a3d->dev.id.product = a3d->mode;
a3d->dev.idversion = 0x0100; a3d->dev.id.version = 0x0100;
input_register_device(&a3d->dev); input_register_device(&a3d->dev);
printk(KERN_INFO "input: %s on %s\n", a3d_names[a3d->mode], a3d->phys); printk(KERN_INFO "input: %s on %s\n", a3d_names[a3d->mode], a3d->phys);
......
...@@ -416,10 +416,10 @@ static void adi_init_input(struct adi *adi, struct adi_port *port, int half) ...@@ -416,10 +416,10 @@ static void adi_init_input(struct adi *adi, struct adi_port *port, int half)
adi->dev.name = adi->name; adi->dev.name = adi->name;
adi->dev.phys = adi->phys; adi->dev.phys = adi->phys;
adi->dev.idbus = BUS_GAMEPORT; adi->dev.id.bustype = BUS_GAMEPORT;
adi->dev.idvendor = GAMEPORT_ID_VENDOR_LOGITECH; adi->dev.id.vendor = GAMEPORT_ID_VENDOR_LOGITECH;
adi->dev.idproduct = adi->id; adi->dev.id.product = adi->id;
adi->dev.idversion = 0x0100; adi->dev.id.version = 0x0100;
adi->dev.private = port; adi->dev.private = port;
adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
......
...@@ -134,10 +134,10 @@ static int __init amijoy_init(void) ...@@ -134,10 +134,10 @@ static int __init amijoy_init(void)
amijoy->dev[i].name = amijoy_name; amijoy->dev[i].name = amijoy_name;
amijoy->dev[i].phys = amijoy_phys[i]; amijoy->dev[i].phys = amijoy_phys[i];
amijoy->dev[i].idbus = BUS_AMIGA; amijoy->dev[i].id.bustype = BUS_AMIGA;
amijoy->dev[i].idvendor = 0x0001; amijoy->dev[i].id.vendor = 0x0001;
amijoy->dev[i].idproduct = 0x0003; amijoy->dev[i].id.product = 0x0003;
amijoy->dev[i].version = 0x0100; amijoy->dev[i].id.version = 0x0100;
amijoy_dev[i].private = amijoy_used + i; amijoy_dev[i].private = amijoy_used + i;
......
...@@ -436,10 +436,10 @@ static void analog_init_device(struct analog_port *port, struct analog *analog, ...@@ -436,10 +436,10 @@ static void analog_init_device(struct analog_port *port, struct analog *analog,
analog->dev.name = analog->name; analog->dev.name = analog->name;
analog->dev.phys = analog->phys; analog->dev.phys = analog->phys;
analog->dev.idbus = BUS_GAMEPORT; analog->dev.id.bustype = BUS_GAMEPORT;
analog->dev.idvendor = GAMEPORT_ID_VENDOR_ANALOG; analog->dev.id.vendor = GAMEPORT_ID_VENDOR_ANALOG;
analog->dev.idproduct = analog->mask >> 4; analog->dev.id.product = analog->mask >> 4;
analog->dev.idversion = 0x0100; analog->dev.id.version = 0x0100;
analog->dev.open = analog_open; analog->dev.open = analog_open;
analog->dev.close = analog_close; analog->dev.close = analog_close;
......
...@@ -199,10 +199,10 @@ static void cobra_connect(struct gameport *gameport, struct gameport_dev *dev) ...@@ -199,10 +199,10 @@ static void cobra_connect(struct gameport *gameport, struct gameport_dev *dev)
cobra->dev[i].name = cobra_name; cobra->dev[i].name = cobra_name;
cobra->dev[i].phys = cobra->phys[i]; cobra->dev[i].phys = cobra->phys[i];
cobra->dev[i].idbus = BUS_GAMEPORT; cobra->dev[i].id.bustype = BUS_GAMEPORT;
cobra->dev[i].idvendor = GAMEPORT_ID_VENDOR_CREATIVE; cobra->dev[i].id.vendor = GAMEPORT_ID_VENDOR_CREATIVE;
cobra->dev[i].idproduct = 0x0008; cobra->dev[i].id.product = 0x0008;
cobra->dev[i].idversion = 0x0100; cobra->dev[i].id.version = 0x0100;
cobra->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); cobra->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
cobra->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y); cobra->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
......
...@@ -351,10 +351,10 @@ static struct db9 __init *db9_probe(int *config) ...@@ -351,10 +351,10 @@ static struct db9 __init *db9_probe(int *config)
db9->dev[i].name = db9_name[db9->mode]; db9->dev[i].name = db9_name[db9->mode];
db9->dev[i].phys = db9->phys[i]; db9->dev[i].phys = db9->phys[i];
db9->dev[i].idbus = BUS_PARPORT; db9->dev[i].id.bustype = BUS_PARPORT;
db9->dev[i].idvendor = 0x0002; db9->dev[i].id.vendor = 0x0002;
db9->dev[i].idproduct = config[1]; db9->dev[i].id.product = config[1];
db9->dev[i].idversion = 0x0100; db9->dev[i].id.version = 0x0100;
db9->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); db9->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
db9->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y); db9->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
...@@ -373,21 +373,21 @@ static struct db9 __init *db9_probe(int *config) ...@@ -373,21 +373,21 @@ static struct db9 __init *db9_probe(int *config)
} }
#ifndef MODULE #ifndef MODULE
int __init db9_setup(char *str) static int __init db9_setup(char *str)
{ {
int i, ints[3]; int i, ints[3];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
for (i = 0; i <= ints[0] && i < 2; i++) db9[i] = ints[i + 1]; for (i = 0; i <= ints[0] && i < 2; i++) db9[i] = ints[i + 1];
return 1; return 1;
} }
int __init db9_setup_2(char *str) static int __init db9_setup_2(char *str)
{ {
int i, ints[3]; int i, ints[3];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
for (i = 0; i <= ints[0] && i < 2; i++) db9_2[i] = ints[i + 1]; for (i = 0; i <= ints[0] && i < 2; i++) db9_2[i] = ints[i + 1];
return 1; return 1;
} }
int __init db9_setup_3(char *str) static int __init db9_setup_3(char *str)
{ {
int i, ints[3]; int i, ints[3];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
......
...@@ -593,10 +593,10 @@ static struct gc __init *gc_probe(int *config) ...@@ -593,10 +593,10 @@ static struct gc __init *gc_probe(int *config)
gc->dev[i].name = gc_names[config[i + 1]]; gc->dev[i].name = gc_names[config[i + 1]];
gc->dev[i].phys = gc->phys[i]; gc->dev[i].phys = gc->phys[i];
gc->dev[i].idbus = BUS_PARPORT; gc->dev[i].id.bustype = BUS_PARPORT;
gc->dev[i].idvendor = 0x0001; gc->dev[i].id.vendor = 0x0001;
gc->dev[i].idproduct = config[i + 1]; gc->dev[i].id.product = config[i + 1];
gc->dev[i].idversion = 0x0100; gc->dev[i].id.version = 0x0100;
} }
parport_release(gc->pd); parport_release(gc->pd);
...@@ -617,21 +617,21 @@ static struct gc __init *gc_probe(int *config) ...@@ -617,21 +617,21 @@ static struct gc __init *gc_probe(int *config)
} }
#ifndef MODULE #ifndef MODULE
int __init gc_setup(char *str) static int __init gc_setup(char *str)
{ {
int i, ints[7]; int i, ints[7];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
for (i = 0; i <= ints[0] && i < 6; i++) gc[i] = ints[i + 1]; for (i = 0; i <= ints[0] && i < 6; i++) gc[i] = ints[i + 1];
return 1; return 1;
} }
int __init gc_setup_2(char *str) static int __init gc_setup_2(char *str)
{ {
int i, ints[7]; int i, ints[7];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
for (i = 0; i <= ints[0] && i < 6; i++) gc_2[i] = ints[i + 1]; for (i = 0; i <= ints[0] && i < 6; i++) gc_2[i] = ints[i + 1];
return 1; return 1;
} }
int __init gc_setup_3(char *str) static int __init gc_setup_3(char *str)
{ {
int i, ints[7]; int i, ints[7];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
......
...@@ -295,10 +295,10 @@ static void gf2k_connect(struct gameport *gameport, struct gameport_dev *dev) ...@@ -295,10 +295,10 @@ static void gf2k_connect(struct gameport *gameport, struct gameport_dev *dev)
gf2k->dev.name = gf2k_names[gf2k->id]; gf2k->dev.name = gf2k_names[gf2k->id];
gf2k->dev.phys = gf2k->phys; gf2k->dev.phys = gf2k->phys;
gf2k->dev.idbus = BUS_GAMEPORT; gf2k->dev.id.bustype = BUS_GAMEPORT;
gf2k->dev.idvendor = GAMEPORT_ID_VENDOR_GENIUS; gf2k->dev.id.vendor = GAMEPORT_ID_VENDOR_GENIUS;
gf2k->dev.idproduct = gf2k->id; gf2k->dev.id.product = gf2k->id;
gf2k->dev.idversion = 0x0100; gf2k->dev.id.version = 0x0100;
for (i = 0; i < gf2k_axes[gf2k->id]; i++) for (i = 0; i < gf2k_axes[gf2k->id]; i++)
set_bit(gf2k_abs[i], gf2k->dev.absbit); set_bit(gf2k_abs[i], gf2k->dev.absbit);
......
...@@ -350,10 +350,10 @@ static void grip_connect(struct gameport *gameport, struct gameport_dev *dev) ...@@ -350,10 +350,10 @@ static void grip_connect(struct gameport *gameport, struct gameport_dev *dev)
grip->dev[i].name = grip_name[grip->mode[i]]; grip->dev[i].name = grip_name[grip->mode[i]];
grip->dev[i].phys = grip->phys[i]; grip->dev[i].phys = grip->phys[i];
grip->dev[i].idbus = BUS_GAMEPORT; grip->dev[i].id.bustype = BUS_GAMEPORT;
grip->dev[i].idvendor = GAMEPORT_ID_VENDOR_GRAVIS; grip->dev[i].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
grip->dev[i].idproduct = grip->mode[i]; grip->dev[i].id.product = grip->mode[i];
grip->dev[i].idversion = 0x0100; grip->dev[i].id.version = 0x0100;
grip->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); grip->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
......
...@@ -222,10 +222,10 @@ static void guillemot_connect(struct gameport *gameport, struct gameport_dev *de ...@@ -222,10 +222,10 @@ static void guillemot_connect(struct gameport *gameport, struct gameport_dev *de
guillemot->dev.name = guillemot_type[i].name; guillemot->dev.name = guillemot_type[i].name;
guillemot->dev.phys = guillemot->phys; guillemot->dev.phys = guillemot->phys;
guillemot->dev.idbus = BUS_GAMEPORT; guillemot->dev.id.bustype = BUS_GAMEPORT;
guillemot->dev.idvendor = GAMEPORT_ID_VENDOR_GUILLEMOT; guillemot->dev.id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT;
guillemot->dev.idproduct = guillemot_type[i].id; guillemot->dev.id.product = guillemot_type[i].id;
guillemot->dev.idversion = (int)data[14] << 8 | data[15]; guillemot->dev.id.version = (int)data[14] << 8 | data[15];
guillemot->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); guillemot->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
......
...@@ -352,7 +352,7 @@ int iforce_init_device(struct iforce *iforce) ...@@ -352,7 +352,7 @@ int iforce_init_device(struct iforce *iforce)
* Input device fields. * Input device fields.
*/ */
iforce->dev.idbus = BUS_USB; iforce->dev.id.bustype = BUS_USB;
iforce->dev.private = iforce; iforce->dev.private = iforce;
iforce->dev.name = "Unknown I-Force device"; iforce->dev.name = "Unknown I-Force device";
iforce->dev.open = iforce_open; iforce->dev.open = iforce_open;
...@@ -392,12 +392,12 @@ int iforce_init_device(struct iforce *iforce) ...@@ -392,12 +392,12 @@ int iforce_init_device(struct iforce *iforce)
*/ */
if (!iforce_get_id_packet(iforce, "M")) if (!iforce_get_id_packet(iforce, "M"))
iforce->dev.idvendor = (iforce->edata[2] << 8) | iforce->edata[1]; iforce->dev.id.vendor = (iforce->edata[2] << 8) | iforce->edata[1];
else else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet M\n"); printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet M\n");
if (!iforce_get_id_packet(iforce, "P")) if (!iforce_get_id_packet(iforce, "P"))
iforce->dev.idproduct = (iforce->edata[2] << 8) | iforce->edata[1]; iforce->dev.id.product = (iforce->edata[2] << 8) | iforce->edata[1];
else else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet P\n"); printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet P\n");
...@@ -438,8 +438,8 @@ int iforce_init_device(struct iforce *iforce) ...@@ -438,8 +438,8 @@ int iforce_init_device(struct iforce *iforce)
*/ */
for (i = 0; iforce_device[i].idvendor; i++) for (i = 0; iforce_device[i].idvendor; i++)
if (iforce_device[i].idvendor == iforce->dev.idvendor && if (iforce_device[i].idvendor == iforce->dev.id.vendor &&
iforce_device[i].idproduct == iforce->dev.idproduct) iforce_device[i].idproduct == iforce->dev.id.product)
break; break;
iforce->type = iforce_device + i; iforce->type = iforce_device + i;
......
...@@ -254,10 +254,10 @@ static void interact_connect(struct gameport *gameport, struct gameport_dev *dev ...@@ -254,10 +254,10 @@ static void interact_connect(struct gameport *gameport, struct gameport_dev *dev
interact->dev.name = interact_type[i].name; interact->dev.name = interact_type[i].name;
interact->dev.phys = interact->phys; interact->dev.phys = interact->phys;
interact->dev.idbus = BUS_GAMEPORT; interact->dev.id.bustype = BUS_GAMEPORT;
interact->dev.idvendor = GAMEPORT_ID_VENDOR_INTERACT; interact->dev.id.vendor = GAMEPORT_ID_VENDOR_INTERACT;
interact->dev.idproduct = interact_type[i].id; interact->dev.id.product = interact_type[i].id;
interact->dev.idversion = 0x0100; interact->dev.id.version = 0x0100;
interact->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); interact->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
......
...@@ -170,10 +170,10 @@ static void magellan_connect(struct serio *serio, struct serio_dev *dev) ...@@ -170,10 +170,10 @@ static void magellan_connect(struct serio *serio, struct serio_dev *dev)
magellan->dev.private = magellan; magellan->dev.private = magellan;
magellan->dev.name = magellan_name; magellan->dev.name = magellan_name;
magellan->dev.phys = magellan->phys; magellan->dev.phys = magellan->phys;
magellan->dev.idbus = BUS_RS232; magellan->dev.id.bustype = BUS_RS232;
magellan->dev.idvendor = SERIO_MAGELLAN; magellan->dev.id.vendor = SERIO_MAGELLAN;
magellan->dev.idproduct = 0x0001; magellan->dev.id.product = 0x0001;
magellan->dev.idversion = 0x0100; magellan->dev.id.version = 0x0100;
serio->private = magellan; serio->private = magellan;
......
...@@ -701,10 +701,10 @@ static void sw_connect(struct gameport *gameport, struct gameport_dev *dev) ...@@ -701,10 +701,10 @@ static void sw_connect(struct gameport *gameport, struct gameport_dev *dev)
sw->dev[i].name = sw->name; sw->dev[i].name = sw->name;
sw->dev[i].phys = sw->phys[i]; sw->dev[i].phys = sw->phys[i];
sw->dev[i].idbus = BUS_GAMEPORT; sw->dev[i].id.bustype = BUS_GAMEPORT;
sw->dev[i].idvendor = GAMEPORT_ID_VENDOR_MICROSOFT; sw->dev[i].id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT;
sw->dev[i].idproduct = sw->type; sw->dev[i].id.product = sw->type;
sw->dev[i].idversion = 0x0100; sw->dev[i].id.version = 0x0100;
sw->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); sw->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
......
...@@ -240,10 +240,10 @@ static void spaceball_connect(struct serio *serio, struct serio_dev *dev) ...@@ -240,10 +240,10 @@ static void spaceball_connect(struct serio *serio, struct serio_dev *dev)
spaceball->dev.name = spaceball_names[id]; spaceball->dev.name = spaceball_names[id];
spaceball->dev.phys = spaceball->phys; spaceball->dev.phys = spaceball->phys;
spaceball->dev.idbus = BUS_RS232; spaceball->dev.id.bustype = BUS_RS232;
spaceball->dev.idvendor = SERIO_SPACEBALL; spaceball->dev.id.vendor = SERIO_SPACEBALL;
spaceball->dev.idproduct = id; spaceball->dev.id.product = id;
spaceball->dev.idversion = 0x0100; spaceball->dev.id.version = 0x0100;
serio->private = spaceball; serio->private = spaceball;
......
...@@ -187,10 +187,10 @@ static void spaceorb_connect(struct serio *serio, struct serio_dev *dev) ...@@ -187,10 +187,10 @@ static void spaceorb_connect(struct serio *serio, struct serio_dev *dev)
spaceorb->dev.name = spaceorb_name; spaceorb->dev.name = spaceorb_name;
spaceorb->dev.phys = spaceorb->phys; spaceorb->dev.phys = spaceorb->phys;
spaceorb->dev.idbus = BUS_RS232; spaceorb->dev.id.bustype = BUS_RS232;
spaceorb->dev.idvendor = SERIO_SPACEORB; spaceorb->dev.id.vendor = SERIO_SPACEORB;
spaceorb->dev.idproduct = 0x0001; spaceorb->dev.id.product = 0x0001;
spaceorb->dev.idversion = 0x0100; spaceorb->dev.id.version = 0x0100;
serio->private = spaceorb; serio->private = spaceorb;
......
...@@ -152,10 +152,10 @@ static void stinger_connect(struct serio *serio, struct serio_dev *dev) ...@@ -152,10 +152,10 @@ static void stinger_connect(struct serio *serio, struct serio_dev *dev)
stinger->dev.name = stinger_name; stinger->dev.name = stinger_name;
stinger->dev.phys = stinger->phys; stinger->dev.phys = stinger->phys;
stinger->dev.idbus = BUS_RS232; stinger->dev.id.bustype = BUS_RS232;
stinger->dev.idvendor = SERIO_STINGER; stinger->dev.id.vendor = SERIO_STINGER;
stinger->dev.idproduct = 0x0001; stinger->dev.id.product = 0x0001;
stinger->dev.idversion = 0x0100; stinger->dev.id.version = 0x0100;
for (i = 0; i < 2; i++) { for (i = 0; i < 2; i++) {
stinger->dev.absmax[ABS_X+i] = 64; stinger->dev.absmax[ABS_X+i] = 64;
......
...@@ -312,10 +312,10 @@ static void tmdc_connect(struct gameport *gameport, struct gameport_dev *dev) ...@@ -312,10 +312,10 @@ static void tmdc_connect(struct gameport *gameport, struct gameport_dev *dev)
tmdc->dev[j].name = tmdc->name[j]; tmdc->dev[j].name = tmdc->name[j];
tmdc->dev[j].phys = tmdc->phys[j]; tmdc->dev[j].phys = tmdc->phys[j];
tmdc->dev[j].idbus = BUS_GAMEPORT; tmdc->dev[j].id.bustype = BUS_GAMEPORT;
tmdc->dev[j].idvendor = GAMEPORT_ID_VENDOR_THRUSTMASTER; tmdc->dev[j].id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER;
tmdc->dev[j].idproduct = models[m].id; tmdc->dev[j].id.product = models[m].id;
tmdc->dev[j].idversion = 0x0100; tmdc->dev[j].id.version = 0x0100;
tmdc->dev[j].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); tmdc->dev[j].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
......
...@@ -179,10 +179,10 @@ static struct tgfx __init *tgfx_probe(int *config) ...@@ -179,10 +179,10 @@ static struct tgfx __init *tgfx_probe(int *config)
tgfx->dev[i].name = tgfx_name; tgfx->dev[i].name = tgfx_name;
tgfx->dev[i].phys = tgfx->phys[i]; tgfx->dev[i].phys = tgfx->phys[i];
tgfx->dev[i].idbus = BUS_PARPORT; tgfx->dev[i].id.bustype = BUS_PARPORT;
tgfx->dev[i].idvendor = 0x0003; tgfx->dev[i].id.vendor = 0x0003;
tgfx->dev[i].idproduct = config[i+1]; tgfx->dev[i].id.product = config[i+1];
tgfx->dev[i].idversion = 0x0100; tgfx->dev[i].id.version = 0x0100;
tgfx->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); tgfx->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
tgfx->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y); tgfx->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
...@@ -208,21 +208,21 @@ static struct tgfx __init *tgfx_probe(int *config) ...@@ -208,21 +208,21 @@ static struct tgfx __init *tgfx_probe(int *config)
} }
#ifndef MODULE #ifndef MODULE
int __init tgfx_setup(char *str) static int __init tgfx_setup(char *str)
{ {
int i, ints[9]; int i, ints[9];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
for (i = 0; i <= ints[0] && i < 8; i++) tgfx[i] = ints[i + 1]; for (i = 0; i <= ints[0] && i < 8; i++) tgfx[i] = ints[i + 1];
return 1; return 1;
} }
int __init tgfx_setup_2(char *str) static int __init tgfx_setup_2(char *str)
{ {
int i, ints[9]; int i, ints[9];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
for (i = 0; i <= ints[0] && i < 8; i++) tgfx_2[i] = ints[i + 1]; for (i = 0; i <= ints[0] && i < 8; i++) tgfx_2[i] = ints[i + 1];
return 1; return 1;
} }
int __init tgfx_setup_3(char *str) static int __init tgfx_setup_3(char *str)
{ {
int i, ints[9]; int i, ints[9];
get_options(str, ARRAY_SIZE(ints), ints); get_options(str, ARRAY_SIZE(ints), ints);
......
...@@ -198,10 +198,10 @@ static void twidjoy_connect(struct serio *serio, struct serio_dev *dev) ...@@ -198,10 +198,10 @@ static void twidjoy_connect(struct serio *serio, struct serio_dev *dev)
twidjoy->dev.name = twidjoy_name; twidjoy->dev.name = twidjoy_name;
twidjoy->dev.phys = twidjoy->phys; twidjoy->dev.phys = twidjoy->phys;
twidjoy->dev.idbus = BUS_RS232; twidjoy->dev.id.bustype = BUS_RS232;
twidjoy->dev.idvendor = SERIO_TWIDJOY; twidjoy->dev.id.vendor = SERIO_TWIDJOY;
twidjoy->dev.idproduct = 0x0001; twidjoy->dev.id.product = 0x0001;
twidjoy->dev.idversion = 0x0100; twidjoy->dev.id.version = 0x0100;
twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
......
...@@ -156,10 +156,10 @@ static void warrior_connect(struct serio *serio, struct serio_dev *dev) ...@@ -156,10 +156,10 @@ static void warrior_connect(struct serio *serio, struct serio_dev *dev)
warrior->dev.name = warrior_name; warrior->dev.name = warrior_name;
warrior->dev.phys = warrior->phys; warrior->dev.phys = warrior->phys;
warrior->dev.idbus = BUS_RS232; warrior->dev.id.bustype = BUS_RS232;
warrior->dev.idvendor = SERIO_WARRIOR; warrior->dev.id.vendor = SERIO_WARRIOR;
warrior->dev.idproduct = 0x0001; warrior->dev.id.product = 0x0001;
warrior->dev.idversion = 0x0100; warrior->dev.id.version = 0x0100;
for (i = 0; i < 2; i++) { for (i = 0; i < 2; i++) {
warrior->dev.absmax[ABS_X+i] = -64; warrior->dev.absmax[ABS_X+i] = -64;
......
...@@ -72,26 +72,6 @@ static unsigned short x86_keycodes[256] = ...@@ -72,26 +72,6 @@ static unsigned short x86_keycodes[256] =
#ifdef CONFIG_MAC_EMUMOUSEBTN #ifdef CONFIG_MAC_EMUMOUSEBTN
extern int mac_hid_mouse_emulate_buttons(int, int, int); extern int mac_hid_mouse_emulate_buttons(int, int, int);
#endif /* CONFIG_MAC_EMUMOUSEBTN */ #endif /* CONFIG_MAC_EMUMOUSEBTN */
#ifdef CONFIG_MAC_ADBKEYCODES
extern int mac_hid_keyboard_sends_linux_keycodes(void);
#else
#define mac_hid_keyboard_sends_linux_keycodes() 0
#endif /* CONFIG_MAC_ADBKEYCODES */
#if defined(CONFIG_MAC_ADBKEYCODES) || defined(CONFIG_ADB_KEYBOARD)
static unsigned char mac_keycodes[256] = {
0, 53, 18, 19, 20, 21, 23, 22, 26, 28, 25, 29, 27, 24, 51, 48,
12, 13, 14, 15, 17, 16, 32, 34, 31, 35, 33, 30, 36, 54,128, 1,
2, 3, 5, 4, 38, 40, 37, 41, 39, 50, 56, 42, 6, 7, 8, 9,
11, 45, 46, 43, 47, 44,123, 67, 58, 49, 57,122,120, 99,118, 96,
97, 98,100,101,109, 71,107, 89, 91, 92, 78, 86, 87, 88, 69, 83,
84, 85, 82, 65, 42, 0, 10,103,111, 0, 0, 0, 0, 0, 0, 0,
76,125, 75,105,124,110,115, 62,116, 59, 60,119, 61,121,114,117,
0, 0, 0, 0,127, 81, 0,113, 0, 0, 0, 0, 95, 55, 55, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 94, 0, 93, 0, 0, 0, 0, 0, 0,104,102 };
#endif /* CONFIG_MAC_ADBKEYCODES || CONFIG_ADB_KEYBOARD */
static int emulate_raw(unsigned int keycode, int down) static int emulate_raw(unsigned int keycode, int down)
{ {
...@@ -99,15 +79,6 @@ static int emulate_raw(unsigned int keycode, int down) ...@@ -99,15 +79,6 @@ static int emulate_raw(unsigned int keycode, int down)
if (mac_hid_mouse_emulate_buttons(1, keycode, down)) if (mac_hid_mouse_emulate_buttons(1, keycode, down))
return 0; return 0;
#endif /* CONFIG_MAC_EMUMOUSEBTN */ #endif /* CONFIG_MAC_EMUMOUSEBTN */
#if defined(CONFIG_MAC_ADBKEYCODES) || defined(CONFIG_ADB_KEYBOARD)
if (!mac_hid_keyboard_sends_linux_keycodes()) {
if (keycode > 255 || !mac_keycodes[keycode])
return -1;
handle_scancode((mac_keycodes[keycode] & 0x7f), down);
return 0;
}
#endif /* CONFIG_MAC_ADBKEYCODES || CONFIG_ADB_KEYBOARD */
if (keycode > 255 || !x86_keycodes[keycode]) if (keycode > 255 || !x86_keycodes[keycode])
return -1; return -1;
......
...@@ -121,10 +121,10 @@ static int __init amikbd_init(void) ...@@ -121,10 +121,10 @@ static int __init amikbd_init(void)
amikbd_dev.name = amikbd_name; amikbd_dev.name = amikbd_name;
amikbd_dev.phys = amikbd_phys; amikbd_dev.phys = amikbd_phys;
amikbd_dev.idbus = BUS_AMIGA; amikbd_dev.id.bustype = BUS_AMIGA;
amikbd_dev.idvendor = 0x0001; amikbd_dev.id.vendor = 0x0001;
amikbd_dev.idproduct = 0x0001; amikbd_dev.id.product = 0x0001;
amikbd_dev.idversion = 0x0100; amikbd_dev.id.version = 0x0100;
input_register_device(&amikbd_dev); input_register_device(&amikbd_dev);
......
...@@ -98,6 +98,7 @@ static unsigned char atkbd_set3_keycode[512] = { ...@@ -98,6 +98,7 @@ static unsigned char atkbd_set3_keycode[512] = {
#define ATKBD_CMD_ENABLE 0x00f4 #define ATKBD_CMD_ENABLE 0x00f4
#define ATKBD_CMD_RESET_DIS 0x00f5 #define ATKBD_CMD_RESET_DIS 0x00f5
#define ATKBD_CMD_SETALL_MB 0x00f8 #define ATKBD_CMD_SETALL_MB 0x00f8
#define ATKBD_CMD_RESEND 0x00fe
#define ATKBD_CMD_EX_ENABLE 0x10ea #define ATKBD_CMD_EX_ENABLE 0x10ea
#define ATKBD_CMD_EX_SETLEDS 0x20eb #define ATKBD_CMD_EX_SETLEDS 0x20eb
...@@ -141,9 +142,16 @@ static void atkbd_interrupt(struct serio *serio, unsigned char data, unsigned in ...@@ -141,9 +142,16 @@ static void atkbd_interrupt(struct serio *serio, unsigned char data, unsigned in
int code = data; int code = data;
#ifdef ATKBD_DEBUG #ifdef ATKBD_DEBUG
printk(KERN_DEBUG "atkbd.c: Received %02x\n", data); printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
#endif #endif
/* Interface error. Request that the keyboard resend. */
if (flags & (SERIO_FRAME | SERIO_PARITY)) {
printk("atkbd.c: frame/parity error: %02x\n", flags);
serio_write(serio, ATKBD_CMD_RESEND);
return;
}
switch (code) { switch (code) {
case ATKBD_RET_ACK: case ATKBD_RET_ACK:
atkbd->ack = 1; atkbd->ack = 1;
...@@ -496,10 +504,10 @@ static void atkbd_connect(struct serio *serio, struct serio_dev *dev) ...@@ -496,10 +504,10 @@ static void atkbd_connect(struct serio *serio, struct serio_dev *dev)
atkbd->dev.name = atkbd->name; atkbd->dev.name = atkbd->name;
atkbd->dev.phys = atkbd->phys; atkbd->dev.phys = atkbd->phys;
atkbd->dev.idbus = BUS_I8042; atkbd->dev.id.bustype = BUS_I8042;
atkbd->dev.idvendor = 0x0001; atkbd->dev.id.vendor = 0x0001;
atkbd->dev.idproduct = atkbd->set; atkbd->dev.id.product = atkbd->set;
atkbd->dev.idversion = atkbd->id; atkbd->dev.id.version = atkbd->id;
for (i = 0; i < 512; i++) for (i = 0; i < 512; i++)
if (atkbd->keycode[i] && atkbd->keycode[i] <= 250) if (atkbd->keycode[i] && atkbd->keycode[i] <= 250)
...@@ -520,14 +528,16 @@ static struct serio_dev atkbd_dev = { ...@@ -520,14 +528,16 @@ static struct serio_dev atkbd_dev = {
disconnect: atkbd_disconnect disconnect: atkbd_disconnect
}; };
/* #ifndef MODULE
* Module init and exit. static int __init atkbd_setup(char *str)
*/
void __init atkbd_setup(char *str, int *ints)
{ {
if (!ints[0]) atkbd_set = ints[1]; int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0) atkbd_set = ints[1];
return 1;
} }
__setup("atkbd_set=", atkbd_setup);
#endif
int __init atkbd_init(void) int __init atkbd_init(void)
{ {
......
...@@ -132,7 +132,7 @@ static int dc_kbd_connect(struct maple_device *dev) ...@@ -132,7 +132,7 @@ static int dc_kbd_connect(struct maple_device *dev)
kbd->dev.event = NULL; kbd->dev.event = NULL;
kbd->dev.name = dev->product_name; kbd->dev.name = dev->product_name;
kbd->dev.idbus = BUS_MAPLE; kbd->dev.id.bustype = BUS_MAPLE;
input_register_device(&kbd->dev); input_register_device(&kbd->dev);
......
...@@ -110,10 +110,10 @@ void nkbd_connect(struct serio *serio, struct serio_dev *dev) ...@@ -110,10 +110,10 @@ void nkbd_connect(struct serio *serio, struct serio_dev *dev)
nkbd->dev.name = nkbd_name; nkbd->dev.name = nkbd_name;
nkbd->dev.phys = nkbd->phys; nkbd->dev.phys = nkbd->phys;
nkbd->dev.idbus = BUS_RS232; nkbd->dev.id.bustype = BUS_RS232;
nkbd->dev.idvendor = SERIO_NEWTON; nkbd->dev.id.vendor = SERIO_NEWTON;
nkbd->dev.idproduct = 0x0001; nkbd->dev.id.product = 0x0001;
nkbd->dev.idversion = 0x0100; nkbd->dev.id.version = 0x0100;
input_register_device(&nkbd->dev); input_register_device(&nkbd->dev);
......
...@@ -246,10 +246,10 @@ static void ps2serkbd_connect(struct serio *serio, struct serio_dev *dev) ...@@ -246,10 +246,10 @@ static void ps2serkbd_connect(struct serio *serio, struct serio_dev *dev)
ps2serkbd->dev.name = ps2serkbd->name; ps2serkbd->dev.name = ps2serkbd->name;
ps2serkbd->dev.phys = ps2serkbd->phys; ps2serkbd->dev.phys = ps2serkbd->phys;
ps2serkbd->dev.idbus = BUS_RS232; ps2serkbd->dev.id.bustype = BUS_RS232;
ps2serkbd->dev.idvendor = SERIO_PS2SER; ps2serkbd->dev.id.vendor = SERIO_PS2SER;
ps2serkbd->dev.idproduct = ps2serkbd->set; ps2serkbd->dev.id.product = ps2serkbd->set;
ps2serkbd->dev.idversion = ps2serkbd->id; ps2serkbd->dev.id.version = ps2serkbd->id;
for (i = 0; i < 512; i++) for (i = 0; i < 512; i++)
if (ps2serkbd->keycode[i] && ps2serkbd->keycode[i] <= 250) if (ps2serkbd->keycode[i] && ps2serkbd->keycode[i] <= 250)
......
...@@ -271,10 +271,10 @@ static void sunkbd_connect(struct serio *serio, struct serio_dev *dev) ...@@ -271,10 +271,10 @@ static void sunkbd_connect(struct serio *serio, struct serio_dev *dev)
sunkbd->dev.name = sunkbd->name; sunkbd->dev.name = sunkbd->name;
sunkbd->dev.phys = sunkbd->phys; sunkbd->dev.phys = sunkbd->phys;
sunkbd->dev.idbus = BUS_RS232; sunkbd->dev.id.bustype = BUS_RS232;
sunkbd->dev.idvendor = SERIO_SUNKBD; sunkbd->dev.id.vendor = SERIO_SUNKBD;
sunkbd->dev.idproduct = sunkbd->type; sunkbd->dev.id.product = sunkbd->type;
sunkbd->dev.idversion = 0x0100; sunkbd->dev.id.version = 0x0100;
input_register_device(&sunkbd->dev); input_register_device(&sunkbd->dev);
......
...@@ -118,10 +118,10 @@ void xtkbd_connect(struct serio *serio, struct serio_dev *dev) ...@@ -118,10 +118,10 @@ void xtkbd_connect(struct serio *serio, struct serio_dev *dev)
xtkbd->dev.name = xtkbd_name; xtkbd->dev.name = xtkbd_name;
xtkbd->dev.phys = xtkbd->phys; xtkbd->dev.phys = xtkbd->phys;
xtkbd->dev.idbus = BUS_XTKBD; xtkbd->dev.id.bustype = BUS_XTKBD;
xtkbd->dev.idvendor = 0x0001; xtkbd->dev.id.vendor = 0x0001;
xtkbd->dev.idproduct = 0x0001; xtkbd->dev.id.product = 0x0001;
xtkbd->dev.idversion = 0x0100; xtkbd->dev.id.version = 0x0100;
input_register_device(&xtkbd->dev); input_register_device(&xtkbd->dev);
......
...@@ -110,10 +110,10 @@ static int __init amimouse_init(void) ...@@ -110,10 +110,10 @@ static int __init amimouse_init(void)
amimouse_dev.name = amimouse_name; amimouse_dev.name = amimouse_name;
amimouse_dev.phys = amimouse_phys; amimouse_dev.phys = amimouse_phys;
amimouse_dev.idbus = BUS_AMIGA; amimouse_dev.id.bustype = BUS_AMIGA;
amimouse_dev.idvendor = 0x0001; amimouse_dev.id.vendor = 0x0001;
amimouse_dev.idproduct = 0x0002; amimouse_dev.id.product = 0x0002;
amimouse_dev.idversion = 0x0100; amimouse_dev.id.version = 0x0100;
input_register_device(&amimouse_dev); input_register_device(&amimouse_dev);
......
...@@ -115,10 +115,6 @@ static struct input_dev inport_dev = { ...@@ -115,10 +115,6 @@ static struct input_dev inport_dev = {
close: inport_close, close: inport_close,
name: INPORT_NAME, name: INPORT_NAME,
phys: "isa023c/input0", phys: "isa023c/input0",
idbus: BUS_ISA,
idvendor: INPORT_VENDOR,
idproduct: 0x0001,
idversion: 0x0100,
}; };
static void inport_interrupt(int irq, void *dev_id, struct pt_regs *regs) static void inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
...@@ -176,6 +172,11 @@ static int __init inport_init(void) ...@@ -176,6 +172,11 @@ static int __init inport_init(void)
request_region(INPORT_BASE, INPORT_EXTENT, "inport"); request_region(INPORT_BASE, INPORT_EXTENT, "inport");
input_register_device(&inport_dev); input_register_device(&inport_dev);
inport_dev.id.bustype =BUS_ISA;
inport_dev.id.vendor =INPORT_VENDOR;
inport_dev.id.product =0x0001;
inport_dev.id.version =0x0100;
printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n",
INPORT_BASE, inport_irq); INPORT_BASE, inport_irq);
......
...@@ -105,10 +105,6 @@ static struct input_dev logibm_dev = { ...@@ -105,10 +105,6 @@ static struct input_dev logibm_dev = {
close: logibm_close, close: logibm_close,
name: "Logitech bus mouse", name: "Logitech bus mouse",
phys: "isa023c/input0", phys: "isa023c/input0",
idbus: BUS_ISA,
idvendor: 0x0003,
idproduct: 0x0001,
idversion: 0x0100,
}; };
static void logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) static void logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
...@@ -125,13 +121,14 @@ static void logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) ...@@ -125,13 +121,14 @@ static void logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT); outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT);
buttons = inb(LOGIBM_DATA_PORT); buttons = inb(LOGIBM_DATA_PORT);
dy |= (buttons & 0xf) << 4; dy |= (buttons & 0xf) << 4;
buttons = ~buttons; buttons = ~buttons >> 5;
input_report_rel(&logibm_dev, REL_X, dx); input_report_rel(&logibm_dev, REL_X, dx);
input_report_rel(&logibm_dev, REL_Y, 255 - dy); input_report_rel(&logibm_dev, REL_Y, dy);
input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 1); input_report_key(&logibm_dev, BTN_RIGHT, buttons & 1);
input_report_key(&logibm_dev, BTN_LEFT, buttons & 2); input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 2);
input_report_key(&logibm_dev, BTN_RIGHT, buttons & 4); input_report_key(&logibm_dev, BTN_LEFT, buttons & 4);
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
} }
#ifndef MODULE #ifndef MODULE
...@@ -147,7 +144,7 @@ __setup("logibm_irq=", logibm_setup); ...@@ -147,7 +144,7 @@ __setup("logibm_irq=", logibm_setup);
static int __init logibm_init(void) static int __init logibm_init(void)
{ {
if (request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE); printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE);
return -EBUSY; return -EBUSY;
} }
...@@ -166,6 +163,10 @@ static int __init logibm_init(void) ...@@ -166,6 +163,10 @@ static int __init logibm_init(void)
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
input_register_device(&logibm_dev); input_register_device(&logibm_dev);
logibm_dev.id.bustype = BUS_ISA;
logibm_dev.id.vendor = 0x0003;
logibm_dev.id.product = 0x0001;
logibm_dev.id.version = 0x0100;
printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq); printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq);
......
...@@ -95,14 +95,14 @@ static int pc110pad_open(struct input_dev *dev) ...@@ -95,14 +95,14 @@ static int pc110pad_open(struct input_dev *dev)
if (pc110pad_used++) if (pc110pad_used++)
return 0; return 0;
save_flags(flags); __save_flags(flags);
cli(); __cli();
pc110pad_interrupt(0,0,0); pc110pad_interrupt(0,0,0);
pc110pad_interrupt(0,0,0); pc110pad_interrupt(0,0,0);
pc110pad_interrupt(0,0,0); pc110pad_interrupt(0,0,0);
outb(PC110PAD_ON, pc110pad_io + 2); outb(PC110PAD_ON, pc110pad_io + 2);
pc110pad_count = 0; pc110pad_count = 0;
restore_flags(flags); __restore_flags(flags);
return 0; return 0;
} }
...@@ -136,10 +136,10 @@ static int __init pc110pad_init(void) ...@@ -136,10 +136,10 @@ static int __init pc110pad_init(void)
pc110pad_dev.name = pc110pad_name; pc110pad_dev.name = pc110pad_name;
pc110pad_dev.phys = pc110pad_phys; pc110pad_dev.phys = pc110pad_phys;
pc110pad_dev.idbus = BUS_ISA; pc110pad_dev.id.bustype = BUS_ISA;
pc110pad_dev.idvendor = 0x0003; pc110pad_dev.id.vendor = 0x0003;
pc110pad_dev.idproduct = 0x0001; pc110pad_dev.id.product = 0x0001;
pc110pad_dev.idversion = 0x0100; pc110pad_dev.id.version = 0x0100;
input_register_device(&pc110pad_dev); input_register_device(&pc110pad_dev);
......
...@@ -142,7 +142,7 @@ static void psmouse_process_packet(struct psmouse *psmouse) ...@@ -142,7 +142,7 @@ static void psmouse_process_packet(struct psmouse *psmouse)
*/ */
if (psmouse->type == PSMOUSE_IMEX) { if (psmouse->type == PSMOUSE_IMEX) {
input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 7) - (int) (packet[2] & 8)); input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 7) - (int) (packet[3] & 8));
input_report_key(dev, BTN_SIDE, (packet[3] >> 4) & 1); input_report_key(dev, BTN_SIDE, (packet[3] >> 4) & 1);
input_report_key(dev, BTN_EXTRA, (packet[3] >> 5) & 1); input_report_key(dev, BTN_EXTRA, (packet[3] >> 5) & 1);
} }
...@@ -600,10 +600,10 @@ static void psmouse_connect(struct serio *serio, struct serio_dev *dev) ...@@ -600,10 +600,10 @@ static void psmouse_connect(struct serio *serio, struct serio_dev *dev)
psmouse->dev.name = psmouse->devname; psmouse->dev.name = psmouse->devname;
psmouse->dev.phys = psmouse->phys; psmouse->dev.phys = psmouse->phys;
psmouse->dev.idbus = BUS_I8042; psmouse->dev.id.bustype = BUS_I8042;
psmouse->dev.idvendor = psmouse->type; psmouse->dev.id.vendor = psmouse->type;
psmouse->dev.idproduct = 0x0002; psmouse->dev.id.product = 0x0002;
psmouse->dev.idversion = 0x0100; psmouse->dev.id.version = 0x0100;
input_register_device(&psmouse->dev); input_register_device(&psmouse->dev);
......
...@@ -22,6 +22,7 @@ ...@@ -22,6 +22,7 @@
#include <linux/ptrace.h> #include <linux/ptrace.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/input.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -40,10 +41,6 @@ static struct input_dev rpcmouse_dev = { ...@@ -40,10 +41,6 @@ static struct input_dev rpcmouse_dev = {
relbit: { BIT(REL_X) | BIT(REL_Y) }, relbit: { BIT(REL_X) | BIT(REL_Y) },
name: "Acorn RiscPC Mouse", name: "Acorn RiscPC Mouse",
phys: "rpcmouse/input0", phys: "rpcmouse/input0",
idbus: BUS_HOST,
idvendor: 0x0005,
idproduct: 0x0001,
idversion: 0x0100,
}; };
static void rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs) static void rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
...@@ -63,9 +60,9 @@ static void rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs) ...@@ -63,9 +60,9 @@ static void rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
input_report_rel(&rpcmouse_dev, REL_X, dx); input_report_rel(&rpcmouse_dev, REL_X, dx);
input_report_rel(&rpcmouse_dev, REL_Y, dy); input_report_rel(&rpcmouse_dev, REL_Y, dy);
input_report_key(&rpcmouse_dev, BTN_LEFT, buttons & 0x10); input_report_key(&rpcmouse_dev, BTN_LEFT, b & 0x10);
input_report_key(&rpcmouse_dev, BTN_MIDDLE, buttons & 0x20); input_report_key(&rpcmouse_dev, BTN_MIDDLE, b & 0x20);
input_report_key(&rpcmouse_dev, BTN_RIGHT, buttons & 0x40); input_report_key(&rpcmouse_dev, BTN_RIGHT, b & 0x40);
} }
static int __init rpcmouse_init(void) static int __init rpcmouse_init(void)
...@@ -79,6 +76,11 @@ static int __init rpcmouse_init(void) ...@@ -79,6 +76,11 @@ static int __init rpcmouse_init(void)
} }
input_register_device(&rpcmouse_dev); input_register_device(&rpcmouse_dev);
rpcmouse.id.bustype =BUS_HOST,
rpcmouse.id.vendor =0x0005,
rpcmouse.id.product =0x0001,
rpcmouse.id.version =0x0100,
printk(KERN_INFO "input: Acorn RiscPC mouse irq %d", IRQ_VSYNCPULSE); printk(KERN_INFO "input: Acorn RiscPC mouse irq %d", IRQ_VSYNCPULSE);
return 0; return 0;
......
...@@ -263,10 +263,10 @@ static void sermouse_connect(struct serio *serio, struct serio_dev *dev) ...@@ -263,10 +263,10 @@ static void sermouse_connect(struct serio *serio, struct serio_dev *dev)
sermouse->dev.name = sermouse_protocols[sermouse->type]; sermouse->dev.name = sermouse_protocols[sermouse->type];
sermouse->dev.phys = sermouse->phys; sermouse->dev.phys = sermouse->phys;
sermouse->dev.idbus = BUS_RS232; sermouse->dev.id.bustype = BUS_RS232;
sermouse->dev.idvendor = sermouse->type; sermouse->dev.id.vendor = sermouse->type;
sermouse->dev.idproduct = c; sermouse->dev.id.product = c;
sermouse->dev.idversion = 0x0100; sermouse->dev.id.version = 0x0100;
if (serio_open(serio, dev)) { if (serio_open(serio, dev)) {
kfree(sermouse); kfree(sermouse);
......
...@@ -12,9 +12,17 @@ if [ "$CONFIG_SERIO_I8042" != "n" ]; then ...@@ -12,9 +12,17 @@ if [ "$CONFIG_SERIO_I8042" != "n" ]; then
fi fi
dep_tristate ' Serial port line discipline' CONFIG_SERIO_SERPORT $CONFIG_SERIO dep_tristate ' Serial port line discipline' CONFIG_SERIO_SERPORT $CONFIG_SERIO
dep_tristate ' ct82c710 Aux port controller' CONFIG_SERIO_CT82C710 $CONFIG_SERIO dep_tristate ' ct82c710 Aux port controller' CONFIG_SERIO_CT82C710 $CONFIG_SERIO
dep_tristate ' Q40 keyboard controller' CONFIG_SERIO_Q40KBD $CONFIG_SERIO if [ "$CONFIG_Q40" = "y" ]; then
dep_tristate ' Q40 keyboard controller' CONFIG_SERIO_Q40KBD $CONFIG_SERIO
fi
dep_tristate ' Parallel port keyboard adapter' CONFIG_SERIO_PARKBD $CONFIG_SERIO $CONFIG_PARPORT dep_tristate ' Parallel port keyboard adapter' CONFIG_SERIO_PARKBD $CONFIG_SERIO $CONFIG_PARPORT
if [ "$CONFIG_ARCH_ACORN" = "y" ]; then if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
dep_tristate ' Acorn RiscPC keyboard controller' CONFIG_SERIO_ACORN $CONFIG_SERIO dep_tristate ' Acorn RiscPC keyboard controller' CONFIG_SERIO_ACORN $CONFIG_SERIO
fi fi
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
dep_tristate ' AMBA KMI keyboard controller' CONFIG_SERIO_AMBAKMI $CONFIG_SERIO
fi
if [ "$CONFIG_SA1111" = "y" ]; then
dep_tristate ' Intel SA1111 keyboard controller' CONFIG_SERIO_SA1111 $CONFIG_SERIO
fi
...@@ -14,6 +14,8 @@ obj-$(CONFIG_SERIO_PARKBD) += parkbd.o ...@@ -14,6 +14,8 @@ obj-$(CONFIG_SERIO_PARKBD) += parkbd.o
obj-$(CONFIG_SERIO_SERPORT) += serport.o obj-$(CONFIG_SERIO_SERPORT) += serport.o
obj-$(CONFIG_SERIO_CT82C710) += ct82c710.o obj-$(CONFIG_SERIO_CT82C710) += ct82c710.o
obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o
obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
# The global Rules.make. # The global Rules.make.
......
/*
* linux/drivers/input/serio/amba_kmi.c
*
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* Copyright (C) 2002 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/amba_kmi.h>
#include <asm/mach/amba_kmi.h>
extern struct pt_regs *kbd_pt_regs;
#define KMI_BASE (kmi->base)
struct amba_kmi_port {
struct serio io;
struct amba_kmi_port *next;
unsigned long base;
unsigned int irq;
unsigned int divisor;
char name[32];
char phys[16];
};
static void amba_kmi_int(int irq, void *dev_id, struct pt_regs *regs)
{
struct amba_kmi_port *kmi = dev_id;
unsigned int status = __raw_readb(KMIIR);
kbd_pt_regs = regs;
while (status & KMIIR_RXINTR) {
serio_interrupt(&kmi->io, __raw_readb(KMIDATA), 0);
status = __raw_readb(KMIIR);
}
}
static int amba_kmi_write(struct serio *io, unsigned char val)
{
struct amba_kmi_port *kmi = io->driver;
unsigned int timeleft = 10000; /* timeout in 100ms */
while ((__raw_readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && timeleft--)
udelay(10);
if (timeleft)
__raw_writeb(val, KMIDATA);
return timeleft ? 0 : SERIO_TIMEOUT;
}
static int amba_kmi_open(struct serio *io)
{
struct amba_kmi_port *kmi = io->driver;
int ret;
__raw_writeb(kmi->divisor, KMICLKDIV);
__raw_writeb(KMICR_EN, KMICR);
ret = request_irq(kmi->irq, amba_kmi_int, 0, kmi->phys, kmi);
if (ret) {
printk(KERN_ERR "kmi: failed to claim IRQ%d\n", kmi->irq);
__raw_writeb(0, KMICR);
return ret;
}
__raw_writeb(KMICR_EN | KMICR_RXINTREN, KMICR);
return 0;
}
static void amba_kmi_close(struct serio *io)
{
struct amba_kmi_port *kmi = io->driver;
free_irq(kmi->irq, kmi);
__raw_writeb(0, KMICR);
}
static struct amba_kmi_port *list;
static int __init amba_kmi_init_one(char *type, unsigned long base, int irq, int nr)
{
struct amba_kmi_port *kmi;
kmi = kmalloc(sizeof(struct amba_kmi_port), GFP_KERNEL);
if (!kmi)
return -ENOMEM;
memset(kmi, 0, sizeof(struct amba_kmi_port));
kmi->io.type = SERIO_8042;
kmi->io.write = amba_kmi_write;
kmi->io.open = amba_kmi_open;
kmi->io.close = amba_kmi_close;
kmi->io.name = kmi->name;
kmi->io.phys = kmi->phys;
kmi->io.driver = kmi;
kmi->base = base;
kmi->irq = irq;
kmi->divisor = 24 / 8 - 1;
kmi->next = list;
list = kmi;
snprintf(kmi->name, sizeof(kmi->name), "AMBA KMI PS/2 %s port", type);
snprintf(kmi->phys, sizeof(kmi->phys), "amba/serio%d", nr);
serio_register_port(&kmi->io);
return 0;
}
static int __init amba_kmi_init(void)
{
amba_kmi_init_one("keyboard", IO_ADDRESS(KMI0_BASE), IRQ_KMIINT0, 0);
amba_kmi_init_one("mouse", IO_ADDRESS(KMI1_BASE), IRQ_KMIINT1, 1);
return 0;
}
static void __exit amba_kmi_exit(void)
{
struct amba_kmi_port *kmi, *next;
kmi = list;
while (kmi) {
next = kmi->next;
serio_unregister_port(&kmi->io);
kfree(kmi);
kmi = next;
}
}
module_init(amba_kmi_init);
module_exit(amba_kmi_exit);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("AMBA KMI controller driver");
MODULE_LICENSE("GPL");
...@@ -18,6 +18,9 @@ ...@@ -18,6 +18,9 @@
extern void *kb_cs; extern void *kb_cs;
extern void *kb_data; extern void *kb_data;
#define I8042_COMMAND_REG (*(int *)kb_cs)
#define I8042_DATA_REG (*(int *)kb_data)
static inline int i8042_read_data(void) static inline int i8042_read_data(void)
{ {
return readb(kb_data); return readb(kb_data);
...@@ -57,6 +60,9 @@ static inline void i8042_platform_exit(void) ...@@ -57,6 +60,9 @@ static inline void i8042_platform_exit(void)
#define I8042_KBD_PHYS_DESC "spruceps2/serio0" #define I8042_KBD_PHYS_DESC "spruceps2/serio0"
#define I8042_AUX_PHYS_DESC "spruceps2/serio1" #define I8042_AUX_PHYS_DESC "spruceps2/serio1"
#define I8042_COMMAND_REG 0xff810000
#define I8042_DATA_REG 0xff810001
static inline int i8042_read_data(void) static inline int i8042_read_data(void)
{ {
unsigned long kbd_data; unsigned long kbd_data;
......
...@@ -31,11 +31,13 @@ MODULE_PARM(i8042_noaux, "1i"); ...@@ -31,11 +31,13 @@ MODULE_PARM(i8042_noaux, "1i");
MODULE_PARM(i8042_unlock, "1i"); MODULE_PARM(i8042_unlock, "1i");
MODULE_PARM(i8042_reset, "1i"); MODULE_PARM(i8042_reset, "1i");
MODULE_PARM(i8042_direct, "1i"); MODULE_PARM(i8042_direct, "1i");
MODULE_PARM(i8042_restore_ctr, "1i");
static int i8042_noaux; static int i8042_noaux;
static int i8042_unlock; static int i8042_unlock;
static int i8042_reset; static int i8042_reset;
static int i8042_direct; static int i8042_direct;
static int i8042_restore_ctr;
spinlock_t i8042_lock = SPIN_LOCK_UNLOCKED; spinlock_t i8042_lock = SPIN_LOCK_UNLOCKED;
...@@ -111,8 +113,9 @@ static int i8042_flush(void) ...@@ -111,8 +113,9 @@ static int i8042_flush(void)
while ((i8042_read_status() & I8042_STR_OBF) && (i++ < I8042_BUFFER_SIZE)) while ((i8042_read_status() & I8042_STR_OBF) && (i++ < I8042_BUFFER_SIZE))
#ifdef I8042_DEBUG_IO #ifdef I8042_DEBUG_IO
printk(KERN_DEBUG "i8042.c: %02x <- i8042 (flush) [%d]\n", printk(KERN_DEBUG "i8042.c: %02x <- i8042 (flush, %s) [%d]\n",
i8042_read_data(), (int) (jiffies - i8042_start)); i8042_read_data(), i8042_read_status() & I8042_STR_AUXDATA ? "aux" : "kbd",
(int) (jiffies - i8042_start));
#else #else
i8042_read_data(); i8042_read_data();
#endif #endif
...@@ -123,11 +126,11 @@ static int i8042_flush(void) ...@@ -123,11 +126,11 @@ static int i8042_flush(void)
} }
/* /*
* i8042_command() executes a command on the i8042. It also sends the input parameter(s) * i8042_command() executes a command on the i8042. It also sends the input
* of the commands to it, and receives the output value(s). The parameters are to be * parameter(s) of the commands to it, and receives the output value(s). The
* stored in the param array, and the output is placed into the same array. The number * parameters are to be stored in the param array, and the output is placed
* of the parameters and output values is encoded in bits 8-11 of the command * into the same array. The number of the parameters and output values is
* number. * encoded in bits 8-11 of the command number.
*/ */
static int i8042_command(unsigned char *param, int command) static int i8042_command(unsigned char *param, int command)
...@@ -182,9 +185,6 @@ static int i8042_command(unsigned char *param, int command) ...@@ -182,9 +185,6 @@ static int i8042_command(unsigned char *param, int command)
/* /*
* i8042_kbd_write() sends a byte out through the keyboard interface. * i8042_kbd_write() sends a byte out through the keyboard interface.
* It also automatically refreshes the CTR value, since some i8042's
* trash their CTR after attempting to send data to an nonexistent
* device.
*/ */
static int i8042_kbd_write(struct serio *port, unsigned char c) static int i8042_kbd_write(struct serio *port, unsigned char c)
...@@ -222,11 +222,12 @@ static int i8042_aux_write(struct serio *port, unsigned char c) ...@@ -222,11 +222,12 @@ static int i8042_aux_write(struct serio *port, unsigned char c)
retval = i8042_command(&c, I8042_CMD_AUX_SEND); retval = i8042_command(&c, I8042_CMD_AUX_SEND);
/* /*
* Here we restore the CTR value. I don't know why, but i8042's in half-AT * Here we restore the CTR value if requested. I don't know why, but i8042's in
* mode tend to trash their CTR when doing the AUX_SEND command. * half-AT mode tend to trash their CTR when doing the AUX_SEND command.
*/ */
retval |= i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR); if (i8042_restore_ctr)
retval |= i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR);
/* /*
* Make sure the interrupt happens and the character is received even * Make sure the interrupt happens and the character is received even
...@@ -240,16 +241,14 @@ static int i8042_aux_write(struct serio *port, unsigned char c) ...@@ -240,16 +241,14 @@ static int i8042_aux_write(struct serio *port, unsigned char c)
/* /*
* i8042_open() is called when a port is open by the higher layer. * i8042_open() is called when a port is open by the higher layer.
* It allocates an interrupt and enables the port. * It allocates the interrupt and enables in in the chip.
*/ */
static int i8042_open(struct serio *port) static int i8042_open(struct serio *port)
{ {
struct i8042_values *values = port->driver; struct i8042_values *values = port->driver;
/* i8042_flush();
* Allocate the interrupt
*/
if (request_irq(values->irq, i8042_interrupt, 0, "i8042", NULL)) { if (request_irq(values->irq, i8042_interrupt, 0, "i8042", NULL)) {
printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", values->irq, values->name); printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", values->irq, values->name);
...@@ -258,10 +257,6 @@ static int i8042_open(struct serio *port) ...@@ -258,10 +257,6 @@ static int i8042_open(struct serio *port)
return -1; return -1;
} }
/*
* Enable the interrupt.
*/
i8042_ctr |= values->irqen; i8042_ctr |= values->irqen;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
...@@ -269,22 +264,21 @@ static int i8042_open(struct serio *port) ...@@ -269,22 +264,21 @@ static int i8042_open(struct serio *port)
return -1; return -1;
} }
i8042_interrupt(0, NULL, NULL);
return 0; return 0;
} }
/* /*
* i8042_close() frees the interrupt, and disables the interface when the * i8042_close() frees the interrupt, so that it can possibly be used
* upper layer doesn't need it anymore. * by another driver. We never know - if the user doesn't have a mouse,
* the BIOS could have used the AUX interupt for PCI.
*/ */
static void i8042_close(struct serio *port) static void i8042_close(struct serio *port)
{ {
struct i8042_values *values = port->driver; struct i8042_values *values = port->driver;
/*
* Disable the interrupt.
*/
i8042_ctr &= ~values->irqen; i8042_ctr &= ~values->irqen;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
...@@ -292,11 +286,9 @@ static void i8042_close(struct serio *port) ...@@ -292,11 +286,9 @@ static void i8042_close(struct serio *port)
return; return;
} }
/*
* Free the interrupt
*/
free_irq(values->irq, NULL); free_irq(values->irq, NULL);
i8042_flush();
} }
/* /*
...@@ -362,7 +354,7 @@ static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs) ...@@ -362,7 +354,7 @@ static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0); ((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
#ifdef I8042_DEBUG_IO #ifdef I8042_DEBUG_IO
printk(KERN_DEBUG "i8042.c: %02x <- i8042 (interrupt-%s, %d) [%d]\n", printk(KERN_DEBUG "i8042.c: %02x <- i8042 (interrupt, %s, %d) [%d]\n",
data, (str & I8042_STR_AUXDATA) ? "aux" : "kbd", irq, (int) (jiffies - i8042_start)); data, (str & I8042_STR_AUXDATA) ? "aux" : "kbd", irq, (int) (jiffies - i8042_start));
#endif #endif
...@@ -391,22 +383,13 @@ static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs) ...@@ -391,22 +383,13 @@ static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* /*
* i8042_controller init initializes the i8042 controller, and, * i8042_controller init initializes the i8042 controller, and,
* most importantly, sets it into non-xlated mode. * most importantly, sets it into non-xlated mode if that's
* desired.
*/ */
static int __init i8042_controller_init(void) static int __init i8042_controller_init(void)
{ {
/*
* Check the i/o region before we touch it.
*/
#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__)
if (check_region(I8042_DATA_REG, 16)) {
printk(KERN_ERR "i8042.c: %#x port already in use!\n", I8042_DATA_REG);
return -1;
}
#endif
/* /*
* Test the i8042. We need to know if it thinks it's working correctly * Test the i8042. We need to know if it thinks it's working correctly
* before doing anything else. * before doing anything else.
...@@ -431,7 +414,7 @@ static int __init i8042_controller_init(void) ...@@ -431,7 +414,7 @@ static int __init i8042_controller_init(void)
} }
/* /*
* Read the CTR. * Save the CTR for restoral on unload / reboot.
*/ */
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
...@@ -439,14 +422,10 @@ static int __init i8042_controller_init(void) ...@@ -439,14 +422,10 @@ static int __init i8042_controller_init(void)
return -1; return -1;
} }
/*
* Save the CTR for restoral on unload / reboot.
*/
i8042_initial_ctr = i8042_ctr; i8042_initial_ctr = i8042_ctr;
/* /*
* Disable both interfaces and their interrupts. * Disable the keyboard interface and interrupt.
*/ */
i8042_ctr |= I8042_CTR_KBDDIS; i8042_ctr |= I8042_CTR_KBDDIS;
...@@ -625,7 +604,16 @@ static int __init i8042_check_aux(struct i8042_values *values, struct serio *por ...@@ -625,7 +604,16 @@ static int __init i8042_check_aux(struct i8042_values *values, struct serio *por
static int __init i8042_port_register(struct i8042_values *values, struct serio *port) static int __init i8042_port_register(struct i8042_values *values, struct serio *port)
{ {
values->exists = 1; values->exists = 1;
i8042_ctr &= ~values->disable;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
return -1;
}
serio_register_port(port); serio_register_port(port);
printk(KERN_INFO "serio: i8042 %s port at %#x,%#x irq %d\n", printk(KERN_INFO "serio: i8042 %s port at %#x,%#x irq %d\n",
values->name, I8042_DATA_REG, I8042_COMMAND_REG, values->irq); values->name, I8042_DATA_REG, I8042_COMMAND_REG, values->irq);
...@@ -638,45 +626,45 @@ static void i8042_timer_func(unsigned long data) ...@@ -638,45 +626,45 @@ static void i8042_timer_func(unsigned long data)
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD); mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
} }
static void __init i8042_start_polling(void) #ifndef MODULE
static int __init i8042_setup_reset(char *str)
{ {
i8042_ctr &= ~I8042_CTR_KBDDIS; i8042_reset = 1;
if (i8042_aux_values.exists) return 1;
i8042_ctr &= ~I8042_CTR_AUXDIS;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_WARNING "i8042.c: Can't write CTR while starting polling.\n");
return;
}
i8042_timer.function = i8042_timer_func;
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
} }
static int __init i8042_setup_noaux(char *str)
static void __exit i8042_stop_polling(void)
{ {
del_timer(&i8042_timer); i8042_noaux = 1;
return 1;
} }
static int __init i8042_setup_unlock(char *str)
/*
* Module init and cleanup functions.
*/
void __init i8042_setup(char *str, int *ints)
{ {
if (!strcmp(str, "i8042_reset=1")) i8042_unlock = 1;
i8042_reset = 1; return 1;
if (!strcmp(str, "i8042_noaux=1")) }
i8042_noaux = 1; static int __init i8042_setup_direct(char *str)
if (!strcmp(str, "i8042_unlock=1")) {
i8042_unlock = 1; i8042_direct = 1;
if (!strcmp(str, "i8042_direct=1")) return 1;
i8042_direct = 1;
} }
static int __init i8042_setup_restore_ctr(char *str)
{
i8042_restore_ctr = 1;
return 1;
}
__setup("i8042_reset", i8042_setup_reset);
__setup("i8042_noaux", i8042_setup_noaux);
__setup("i8042_unlock", i8042_setup_unlock);
__setup("i8042_direct", i8042_setup_direct);
__setup("i8042_restore_ctr", i8042_setup_restore_ctr);
#endif
/* /*
* Reset the 8042 back to original mode. * We need to reset the 8042 back to original mode on system shutdown,
* because otherwise BIOSes will be confused.
*/ */
static int i8042_notify_sys(struct notifier_block *this, unsigned long code, static int i8042_notify_sys(struct notifier_block *this, unsigned long code,
void *unused) void *unused)
{ {
...@@ -698,18 +686,23 @@ int __init i8042_init(void) ...@@ -698,18 +686,23 @@ int __init i8042_init(void)
i8042_start = jiffies; i8042_start = jiffies;
#endif #endif
#if !defined(__i386__) && !defined(__x86_64__)
i8042_reset = 1;
#endif
if (!i8042_platform_init()) if (!i8042_platform_init())
return -EBUSY; return -EBUSY;
if (i8042_controller_init()) if (i8042_controller_init())
return -ENODEV; return -ENODEV;
i8042_port_register(&i8042_kbd_values, &i8042_kbd_port);
if (!i8042_noaux && !i8042_check_aux(&i8042_aux_values, &i8042_aux_port)) if (!i8042_noaux && !i8042_check_aux(&i8042_aux_values, &i8042_aux_port))
i8042_port_register(&i8042_aux_values, &i8042_aux_port); i8042_port_register(&i8042_aux_values, &i8042_aux_port);
i8042_start_polling(); i8042_port_register(&i8042_kbd_values, &i8042_kbd_port);
i8042_timer.function = i8042_timer_func;
mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
register_reboot_notifier(&i8042_notifier); register_reboot_notifier(&i8042_notifier);
...@@ -720,7 +713,7 @@ void __exit i8042_exit(void) ...@@ -720,7 +713,7 @@ void __exit i8042_exit(void)
{ {
unregister_reboot_notifier(&i8042_notifier); unregister_reboot_notifier(&i8042_notifier);
i8042_stop_polling(); del_timer(&i8042_timer);
if (i8042_kbd_values.exists) if (i8042_kbd_values.exists)
serio_unregister_port(&i8042_kbd_port); serio_unregister_port(&i8042_kbd_port);
...@@ -735,3 +728,5 @@ void __exit i8042_exit(void) ...@@ -735,3 +728,5 @@ void __exit i8042_exit(void)
module_init(i8042_init); module_init(i8042_init);
module_exit(i8042_exit); module_exit(i8042_exit);
...@@ -47,8 +47,10 @@ MODULE_LICENSE("GPL"); ...@@ -47,8 +47,10 @@ MODULE_LICENSE("GPL");
static inline void rpckbd_write(unsigned char val) static inline void rpckbd_write(unsigned char val)
{ {
while(!(inb(IOMD_KCTRL) & (1 << 7))); while (!(iomd_readb(IOMD_KCTRL) & (1 << 7)))
outb(val, IOMD_KARTTX); cpu_relax();
iomd_writeb(val, IOMD_KARTTX);
} }
static struct serio rpckbd_port = static struct serio rpckbd_port =
...@@ -61,11 +63,14 @@ static struct serio rpckbd_port = ...@@ -61,11 +63,14 @@ static struct serio rpckbd_port =
static void rpckbd_rx(int irq, void *dev_id, struct pt_regs *regs) static void rpckbd_rx(int irq, void *dev_id, struct pt_regs *regs)
{ {
unsigned int byte;
kbd_pt_regs = regs; kbd_pt_regs = regs;
while (inb(IOMD_KCTRL) & (1 << 5)) while (iomd_readb(IOMD_KCTRL) & (1 << 5)) {
serio_interrupt(&rpckbd_port, inb(IOMD_KARTRX), 0); byte = iomd_readb(IOMD_KARTRX);
serio_interrupt(&rpckbd_port, byte, 0);
}
} }
static void rpckbd_tx(int irq, void *dev_id, struct pt_regs *regs) static void rpckbd_tx(int irq, void *dev_id, struct pt_regs *regs)
...@@ -74,13 +79,10 @@ static void rpckbd_tx(int irq, void *dev_id, struct pt_regs *regs) ...@@ -74,13 +79,10 @@ static void rpckbd_tx(int irq, void *dev_id, struct pt_regs *regs)
static int __init rpckbd_init(void) static int __init rpckbd_init(void)
{ {
unsigned long flags;
/* Reset the keyboard state machine. */ /* Reset the keyboard state machine. */
outb(0, IOMD_KCTRL); iomd_writeb(0, IOMD_KCTRL);
outb(8, IOMD_KCTRL); iomd_writeb(8, IOMD_KCTRL);
iomd_readb(IOMD_KARTRX);
save_flags_cli(flags);
if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", NULL) != 0) { if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", NULL) != 0) {
printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ!\n") printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ!\n")
...@@ -93,14 +95,7 @@ static int __init rpckbd_init(void) ...@@ -93,14 +95,7 @@ static int __init rpckbd_init(void)
return -EBUSY; return -EBUSY;
} }
disable_irq(IRQ_KEYBOARDTX);
(void)IOMD_KARTRX;
restore_flags(flags);
register_serio_port(&rpckbd_port); register_serio_port(&rpckbd_port);
printk(KERN_INFO "serio: RiscPC PS/2 kbd port irq %d %d\n", IRQ_KEYBOARDRX, IRQ_KEYBOARDTX);
return 0; return 0;
} }
......
/*
* linux/drivers/input/serio/sa1111ps2.c
*
* Copyright (C) 2002 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <asm/hardware/sa1111.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
extern struct pt_regs *kbd_pt_regs;
struct ps2if {
struct serio io;
struct resource *res;
unsigned long base;
unsigned int irq;
unsigned int skpcr_mask;
};
/*
* Read all bytes waiting in the PS2 port. There should be
* at the most one, but we loop for safety. If there was a
* framing error, we have to manually clear the status.
*/
static void ps2_int(int irq, void *dev_id, struct pt_regs *regs)
{
struct ps2if *sa = dev_id;
unsigned int scancode, flag, status;
kbd_pt_regs = regs;
status = sa1111_readl(sa->base + SA1111_PS2STAT);
while (status & PS2STAT_RXF) {
if (status & PS2STAT_STP)
sa1111_writel(PS2STAT_STP, sa->base + SA1111_PS2STAT);
flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) |
(status & PS2STAT_RXP ? 0 : SERIO_PARITY);
scancode = sa1111_readl(sa->base + SA1111_PS2DATA) & 0xff;
if (hweight8(scancode) & 1)
flag ^= SERIO_PARITY;
serio_interrupt(&sa->io, scancode, flag);
status = sa1111_readl(sa->base + SA1111_PS2STAT);
}
}
/*
* Write a byte to the PS2 port. We have to wait for the
* port to indicate that the transmitter is empty.
*/
static int ps2_write(struct serio *io, unsigned char val)
{
struct ps2if *sa = io->driver;
unsigned int timeleft = 10000; /* timeout in 100ms */
while ((sa1111_readl(sa->base + SA1111_PS2STAT) & PS2STAT_TXE) == 0 &&
timeleft--)
udelay(10);
if (timeleft)
sa1111_writel(val, sa->base + SA1111_PS2DATA);
return timeleft ? 0 : SERIO_TIMEOUT;
}
static int ps2_open(struct serio *io)
{
struct ps2if *sa = io->driver;
int ret;
sa1111_enable_device(sa->skpcr_mask);
ret = request_irq(sa->irq, ps2_int, 0, "ps2", sa);
if (ret) {
printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
sa->irq, ret);
return ret;
}
sa1111_writel(PS2CR_ENA, sa->base + SA1111_PS2CR);
return 0;
}
static void ps2_close(struct serio *io)
{
struct ps2if *sa = io->driver;
sa1111_writel(0, sa->base + SA1111_PS2CR);
free_irq(sa->irq, sa);
sa1111_disable_device(sa->skpcr_mask);
}
/*
* Clear the input buffer.
*/
static void __init ps2_clear_input(struct ps2if *sa)
{
int maxread = 100;
while (maxread--) {
if ((sa1111_readl(sa->base + SA1111_PS2DATA) & 0xff) == 0xff)
break;
}
}
static inline unsigned int
ps2_test_one(struct ps2if *sa, unsigned int mask)
{
unsigned int val;
sa1111_writel(PS2CR_ENA | mask, sa->base + SA1111_PS2CR);
udelay(2);
val = sa1111_readl(sa->base + SA1111_PS2STAT);
return val & (PS2STAT_KBC | PS2STAT_KBD);
}
/*
* Test the keyboard interface. We basically check to make sure that
* we can drive each line to the keyboard independently of each other.
*/
static int __init ps2_test(struct ps2if *sa)
{
unsigned int stat;
int ret = 0;
stat = ps2_test_one(sa, PS2CR_FKC);
if (stat != PS2STAT_KBD) {
printk("Keyboard interface test failed[1]: %02x\n", stat);
ret = -ENODEV;
}
stat = ps2_test_one(sa, 0);
if (stat != (PS2STAT_KBC | PS2STAT_KBD)) {
printk("Keyboard interface test failed[2]: %02x\n", stat);
ret = -ENODEV;
}
stat = ps2_test_one(sa, PS2CR_FKD);
if (stat != PS2STAT_KBC) {
printk("Keyboard interface test failed[3]: %02x\n", stat);
ret = -ENODEV;
}
sa1111_writel(0, sa->base + SA1111_PS2CR);
return ret;
}
/*
* Initialise one PS/2 port.
*/
static int __init ps2_init_one(struct sa1111_device *dev, struct ps2if *sa)
{
int ret;
/*
* Request the physical region for this PS2 port.
*/
sa->res = request_mem_region(_SA1111(sa->base), 512, "ps2");
if (!sa->res)
return -EBUSY;
/*
* Convert the chip offset to virtual address.
*/
sa->base += (unsigned long)dev->base;
sa1111_enable_device(sa->skpcr_mask);
/* Incoming clock is 8MHz */
sa1111_writel(0, sa->base + SA1111_PS2CLKDIV);
sa1111_writel(127, sa->base + SA1111_PS2PRECNT);
/*
* Flush any pending input.
*/
ps2_clear_input(sa);
/*
* Test the keyboard interface.
*/
ret = ps2_test(sa);
if (ret)
goto out;
/*
* Flush any pending input.
*/
ps2_clear_input(sa);
sa1111_disable_device(sa->skpcr_mask);
serio_register_port(&sa->io);
return 0;
out:
sa1111_disable_device(sa->skpcr_mask);
release_resource(sa->res);
return ret;
}
/*
* Remove one PS/2 port.
*/
static void __exit ps2_remove_one(struct ps2if *sa)
{
serio_unregister_port(&sa->io);
release_resource(sa->res);
}
static struct ps2if ps2_kbd_port =
{
io: {
type: SERIO_8042,
write: ps2_write,
open: ps2_open,
close: ps2_close,
name: "SA1111 PS/2 kbd port",
phys: "sa1111/serio0",
driver: &ps2_kbd_port,
},
base: SA1111_KBD,
irq: IRQ_TPRXINT,
skpcr_mask: SKPCR_PTCLKEN,
};
static struct ps2if ps2_mse_port =
{
io: {
type: SERIO_8042,
write: ps2_write,
open: ps2_open,
close: ps2_close,
name: "SA1111 PS/2 mouse port",
phys: "sa1111/serio1",
driver: &ps2_mse_port,
},
base: SA1111_MSE,
irq: IRQ_MSRXINT,
skpcr_mask: SKPCR_PMCLKEN,
};
static int __init ps2_init(void)
{
int ret = -ENODEV;
if (sa1111) {
ret = ps2_init_one(sa1111, &ps2_kbd_port);
}
return ret;
}
static void __exit ps2_exit(void)
{
ps2_remove_one(&ps2_kbd_port);
}
module_init(ps2_init);
module_exit(ps2_exit);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("SA1111 PS2 controller driver");
MODULE_LICENSE("GPL");
...@@ -42,6 +42,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); ...@@ -42,6 +42,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Serio abstraction core"); MODULE_DESCRIPTION("Serio abstraction core");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
EXPORT_SYMBOL(serio_interrupt);
EXPORT_SYMBOL(serio_register_port); EXPORT_SYMBOL(serio_register_port);
EXPORT_SYMBOL(serio_unregister_port); EXPORT_SYMBOL(serio_unregister_port);
EXPORT_SYMBOL(serio_register_device); EXPORT_SYMBOL(serio_register_device);
......
...@@ -134,10 +134,10 @@ static void gunze_connect(struct serio *serio, struct serio_dev *dev) ...@@ -134,10 +134,10 @@ static void gunze_connect(struct serio *serio, struct serio_dev *dev)
gunze->dev.private = gunze; gunze->dev.private = gunze;
gunze->dev.name = gunze_name; gunze->dev.name = gunze_name;
gunze->dev.phys = gunze->phys; gunze->dev.phys = gunze->phys;
gunze->dev.idbus = BUS_RS232; gunze->dev.id.bustype = BUS_RS232;
gunze->dev.idvendor = SERIO_GUNZE; gunze->dev.id.vendor = SERIO_GUNZE;
gunze->dev.idproduct = 0x0051; gunze->dev.id.product = 0x0051;
gunze->dev.idversion = 0x0100; gunze->dev.id.version = 0x0100;
if (serio_open(serio, dev)) { if (serio_open(serio, dev)) {
kfree(gunze); kfree(gunze);
......
...@@ -418,10 +418,10 @@ static void h3600ts_connect(struct serio *serio, struct serio_dev *dev) ...@@ -418,10 +418,10 @@ static void h3600ts_connect(struct serio *serio, struct serio_dev *dev)
ts->dev.private = ts; ts->dev.private = ts;
ts->dev.name = h3600_name; ts->dev.name = h3600_name;
ts->dev.phys = ts->phys; ts->dev.phys = ts->phys;
ts->dev.idbus = BUS_RS232; ts->dev.id.bustype = BUS_RS232;
ts->dev.idvendor = SERIO_H3600; ts->dev.id.vendor = SERIO_H3600;
ts->dev.idproduct = 0x0666; /* FIXME !!! We can ask the hardware */ ts->dev.id.product = 0x0666; /* FIXME !!! We can ask the hardware */
ts->dev.idversion = 0x0100; ts->dev.id.version = 0x0100;
if (serio_open(serio, dev)) { if (serio_open(serio, dev)) {
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts); free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts);
......
...@@ -162,10 +162,10 @@ static int uinput_alloc_device(struct file *file, const char *buffer, size_t cou ...@@ -162,10 +162,10 @@ static int uinput_alloc_device(struct file *file, const char *buffer, size_t cou
strncpy(dev->name, user_dev.name, size); strncpy(dev->name, user_dev.name, size);
dev->name[size] = '\0'; dev->name[size] = '\0';
dev->idbus = user_dev.idbus; dev->id.bustype = user_dev.id.bustype;
dev->idvendor = user_dev.idvendor; dev->id.vendor = user_dev.id.vendor;
dev->idproduct = user_dev.idproduct; dev->id.product = user_dev.id.product;
dev->idversion = user_dev.idversion; dev->id.version = user_dev.id.version;
dev->ff_effects_max = user_dev.ff_effects_max; dev->ff_effects_max = user_dev.ff_effects_max;
size = sizeof(unsigned long) * NBITS(ABS_MAX + 1); size = sizeof(unsigned long) * NBITS(ABS_MAX + 1);
......
...@@ -479,10 +479,10 @@ adbhid_input_register(int id, int default_id, int original_handler_id, ...@@ -479,10 +479,10 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
adbhid[id]->input.private = adbhid[id]; adbhid[id]->input.private = adbhid[id];
adbhid[id]->input.name = adbhid[id]->name; adbhid[id]->input.name = adbhid[id]->name;
adbhid[id]->input.phys = adbhid[id]->phys; adbhid[id]->input.phys = adbhid[id]->phys;
adbhid[id]->input.idbus = BUS_ADB; adbhid[id]->input.id.bustype = BUS_ADB;
adbhid[id]->input.idvendor = 0x0001; adbhid[id]->input.id.vendor = 0x0001;
adbhid[id]->input.idproduct = (id << 12) | (default_id << 8) | original_handler_id; adbhid[id]->input.id.product = (id << 12) | (default_id << 8) | original_handler_id;
adbhid[id]->input.idversion = 0x0100; adbhid[id]->input.id.version = 0x0100;
switch (default_id) { switch (default_id) {
case ADB_KEYBOARD: case ADB_KEYBOARD:
...@@ -607,7 +607,7 @@ adbhid_input_reregister(int id, int default_id, int org_handler_id, ...@@ -607,7 +607,7 @@ adbhid_input_reregister(int id, int default_id, int org_handler_id,
int cur_handler_id, int mk) int cur_handler_id, int mk)
{ {
if (adbhid[id]) { if (adbhid[id]) {
if (adbhid[id]->input.idproduct != if (adbhid[id]->input.id.product !=
((id << 12)|(default_id << 8)|org_handler_id)) { ((id << 12)|(default_id << 8)|org_handler_id)) {
adbhid_input_unregister(id); adbhid_input_unregister(id);
adbhid_input_register(id, default_id, org_handler_id, adbhid_input_register(id, default_id, org_handler_id,
......
...@@ -181,10 +181,10 @@ static void emumousebtn_input_register(void) ...@@ -181,10 +181,10 @@ static void emumousebtn_input_register(void)
emumousebtn.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); emumousebtn.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
emumousebtn.relbit[0] = BIT(REL_X) | BIT(REL_Y); emumousebtn.relbit[0] = BIT(REL_X) | BIT(REL_Y);
emumousebtn.idbus = BUS_ADB; emumousebtn.id.bustype = BUS_ADB;
emumousebtn.idvendor = 0x0001; emumousebtn.id.vendor = 0x0001;
emumousebtn.idproduct = 0x0001; emumousebtn.id.product = 0x0001;
emumousebtn.idversion = 0x0100; emumousebtn.id.version = 0x0100;
input_register_device(&emumousebtn); input_register_device(&emumousebtn);
......
...@@ -277,10 +277,10 @@ aiptek_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -277,10 +277,10 @@ aiptek_probe(struct usb_device *dev, unsigned int ifnum,
aiptek->dev.close = aiptek_close; aiptek->dev.close = aiptek_close;
aiptek->dev.name = aiptek->features->name; aiptek->dev.name = aiptek->features->name;
aiptek->dev.idbus = BUS_USB; aiptek->dev.id.bustype = BUS_USB;
aiptek->dev.idvendor = dev->descriptor.idVendor; aiptek->dev.id.vendor = dev->descriptor.idVendor;
aiptek->dev.idproduct = dev->descriptor.idProduct; aiptek->dev.id.product = dev->descriptor.idProduct;
aiptek->dev.idversion = dev->descriptor.bcdDevice; aiptek->dev.id.version = dev->descriptor.bcdDevice;
aiptek->usbdev = dev; aiptek->usbdev = dev;
endpoint = dev->config[0].interface[ifnum].altsetting[0].endpoint + 0; endpoint = dev->config[0].interface[ifnum].altsetting[0].endpoint + 0;
......
...@@ -490,10 +490,10 @@ int hidinput_connect(struct hid_device *hid) ...@@ -490,10 +490,10 @@ int hidinput_connect(struct hid_device *hid)
hid->input.name = hid->name; hid->input.name = hid->name;
hid->input.phys = hid->phys; hid->input.phys = hid->phys;
hid->input.uniq = hid->uniq; hid->input.uniq = hid->uniq;
hid->input.idbus = BUS_USB; hid->input.id.bustype = BUS_USB;
hid->input.idvendor = dev->descriptor.idVendor; hid->input.id.vendor = dev->descriptor.idVendor;
hid->input.idproduct = dev->descriptor.idProduct; hid->input.id.product = dev->descriptor.idProduct;
hid->input.idversion = dev->descriptor.bcdDevice; hid->input.id.version = dev->descriptor.bcdDevice;
for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++) { for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++) {
report_enum = hid->report_enum + k; report_enum = hid->report_enum + k;
......
...@@ -293,10 +293,10 @@ static void *powermate_probe(struct usb_device *udev, unsigned int ifnum, const ...@@ -293,10 +293,10 @@ static void *powermate_probe(struct usb_device *udev, unsigned int ifnum, const
pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0); pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
pm->input.idbus = BUS_USB; pm->input.id.bustype = BUS_USB;
pm->input.idvendor = udev->descriptor.idVendor; pm->input.id.vendor = udev->descriptor.idVendor;
pm->input.idproduct = udev->descriptor.idProduct; pm->input.id.product = udev->descriptor.idProduct;
pm->input.idversion = udev->descriptor.bcdDevice; pm->input.id.version = udev->descriptor.bcdDevice;
pm->input.event = powermate_input_event; pm->input.event = powermate_input_event;
input_register_device(&pm->input); input_register_device(&pm->input);
......
...@@ -236,10 +236,10 @@ static void *usb_kbd_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -236,10 +236,10 @@ static void *usb_kbd_probe(struct usb_device *dev, unsigned int ifnum,
kbd->dev.name = kbd->name; kbd->dev.name = kbd->name;
kbd->dev.phys = kbd->phys; kbd->dev.phys = kbd->phys;
kbd->dev.idbus = BUS_USB; kbd->dev.id.bus = BUS_USB;
kbd->dev.idvendor = dev->descriptor.idVendor; kbd->dev.id.vendor = dev->descriptor.idVendor;
kbd->dev.idproduct = dev->descriptor.idProduct; kbd->dev.id.product = dev->descriptor.idProduct;
kbd->dev.idversion = dev->descriptor.bcdDevice; kbd->dev.id.version = dev->descriptor.bcdDevice;
if (!(buf = kmalloc(63, GFP_KERNEL))) { if (!(buf = kmalloc(63, GFP_KERNEL))) {
kfree(kbd); kfree(kbd);
...@@ -255,7 +255,7 @@ static void *usb_kbd_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -255,7 +255,7 @@ static void *usb_kbd_probe(struct usb_device *dev, unsigned int ifnum,
if (!strlen(kbd->name)) if (!strlen(kbd->name))
sprintf(kbd->name, "USB HIDBP Keyboard %04x:%04x", sprintf(kbd->name, "USB HIDBP Keyboard %04x:%04x",
kbd->dev.idvendor, kbd->dev.idproduct); kbd->dev.id.vendor, kbd->dev.id.product);
kfree(buf); kfree(buf);
......
...@@ -145,10 +145,10 @@ static void *usb_mouse_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -145,10 +145,10 @@ static void *usb_mouse_probe(struct usb_device *dev, unsigned int ifnum,
mouse->dev.name = mouse->name; mouse->dev.name = mouse->name;
mouse->dev.phys = mouse->phys; mouse->dev.phys = mouse->phys;
mouse->dev.idbus = BUS_USB; mouse->dev.id.bus = BUS_USB;
mouse->dev.idvendor = dev->descriptor.idVendor; mouse->dev.id.vendor = dev->descriptor.idVendor;
mouse->dev.idproduct = dev->descriptor.idProduct; mouse->dev.id.product = dev->descriptor.idProduct;
mouse->dev.idversion = dev->descriptor.bcdDevice; mouse->dev.id.version = dev->descriptor.bcdDevice;
if (!(buf = kmalloc(63, GFP_KERNEL))) { if (!(buf = kmalloc(63, GFP_KERNEL))) {
kfree(mouse); kfree(mouse);
...@@ -164,7 +164,7 @@ static void *usb_mouse_probe(struct usb_device *dev, unsigned int ifnum, ...@@ -164,7 +164,7 @@ static void *usb_mouse_probe(struct usb_device *dev, unsigned int ifnum,
if (!strlen(mouse->name)) if (!strlen(mouse->name))
sprintf(mouse->name, "USB HIDBP Mouse %04x:%04x", sprintf(mouse->name, "USB HIDBP Mouse %04x:%04x",
mouse->dev.idvendor, mouse->dev.idproduct); mouse->dev.id.vendor, mouse->dev.id.product);
kfree(buf); kfree(buf);
......
...@@ -400,10 +400,10 @@ static void *wacom_probe(struct usb_device *dev, unsigned int ifnum, const struc ...@@ -400,10 +400,10 @@ static void *wacom_probe(struct usb_device *dev, unsigned int ifnum, const struc
wacom->dev.name = wacom->features->name; wacom->dev.name = wacom->features->name;
wacom->dev.phys = wacom->phys; wacom->dev.phys = wacom->phys;
wacom->dev.idbus = BUS_USB; wacom->dev.id.bustype = BUS_USB;
wacom->dev.idvendor = dev->descriptor.idVendor; wacom->dev.id.vendor = dev->descriptor.idVendor;
wacom->dev.idproduct = dev->descriptor.idProduct; wacom->dev.id.product = dev->descriptor.idProduct;
wacom->dev.idversion = dev->descriptor.bcdDevice; wacom->dev.id.version = dev->descriptor.bcdDevice;
wacom->usbdev = dev; wacom->usbdev = dev;
endpoint = dev->config[0].interface[ifnum].altsetting[0].endpoint + 0; endpoint = dev->config[0].interface[ifnum].altsetting[0].endpoint + 0;
......
This diff is collapsed.
...@@ -25,10 +25,6 @@ ...@@ -25,10 +25,6 @@
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/kd.h> #include <linux/kd.h>
#include <asm/io.h> #include <asm/io.h>
/* IBM Spruce platform is different. */
#ifdef CONFIG_SPRUCE
#include <platforms/spruce.h>
#endif
#ifndef KEYBOARD_IRQ #ifndef KEYBOARD_IRQ
#define KEYBOARD_IRQ 1 #define KEYBOARD_IRQ 1
......
...@@ -39,10 +39,7 @@ struct gameport { ...@@ -39,10 +39,7 @@ struct gameport {
char *name; char *name;
char *phys; char *phys;
unsigned short idbus; struct input_devinfo id;
unsigned short idvendor;
unsigned short idproduct;
unsigned short idversion;
int io; int io;
int speed; int speed;
......
...@@ -56,8 +56,15 @@ struct input_event { ...@@ -56,8 +56,15 @@ struct input_event {
* IOCTLs (0x00 - 0x7f) * IOCTLs (0x00 - 0x7f)
*/ */
struct input_devinfo {
uint16_t bustype;
uint16_t vendor;
uint16_t product;
uint16_t version;
};
#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
#define EVIOCGID _IOR('E', 0x02, short[4]) /* get device ID */ #define EVIOCGID _IOR('E', 0x02, struct input_devinfo) /* get device ID */
#define EVIOCGREP _IOR('E', 0x03, int[2]) /* get repeat settings */ #define EVIOCGREP _IOR('E', 0x03, int[2]) /* get repeat settings */
#define EVIOCSREP _IOW('E', 0x03, int[2]) /* get repeat settings */ #define EVIOCSREP _IOW('E', 0x03, int[2]) /* get repeat settings */
#define EVIOCGKEYCODE _IOR('E', 0x04, int[2]) /* get keycode */ #define EVIOCGKEYCODE _IOR('E', 0x04, int[2]) /* get keycode */
...@@ -454,17 +461,15 @@ struct input_event { ...@@ -454,17 +461,15 @@ struct input_event {
#define KEY_FIRST 0x194 #define KEY_FIRST 0x194
#define KEY_LAST 0x195 #define KEY_LAST 0x195
#define KEY_AB 0x196 #define KEY_AB 0x196
#define KEY_PLAY 0x197 #define KEY_NEXT 0x197
#define KEY_RESTART 0x198 #define KEY_RESTART 0x198
#define KEY_SLOW 0x199 #define KEY_SLOW 0x199
#define KEY_SHUFFLE 0x19a #define KEY_SHUFFLE 0x19a
#define KEY_FASTFORWARD 0x19b #define KEY_BREAK 0x1ab
#define KEY_PREVIOUS 0x19c #define KEY_PREVIOUS 0x19c
#define KEY_NEXT 0x19d #define KEY_DIGITS 0x19d
#define KEY_DIGITS 0x19e #define KEY_TEEN 0x19e
#define KEY_TEEN 0x19f #define KEY_TWEN 0x1af
#define KEY_TWEN 0x1a0
#define KEY_BREAK 0x1a1
#define KEY_MAX 0x1ff #define KEY_MAX 0x1ff
...@@ -742,10 +747,7 @@ struct input_dev { ...@@ -742,10 +747,7 @@ struct input_dev {
char *name; char *name;
char *phys; char *phys;
char *uniq; char *uniq;
unsigned short idbus; struct input_devinfo id;
unsigned short idvendor;
unsigned short idproduct;
unsigned short idversion;
unsigned long evbit[NBITS(EV_MAX)]; unsigned long evbit[NBITS(EV_MAX)];
unsigned long keybit[NBITS(KEY_MAX)]; unsigned long keybit[NBITS(KEY_MAX)];
...@@ -818,10 +820,7 @@ struct input_device_id { ...@@ -818,10 +820,7 @@ struct input_device_id {
unsigned long flags; unsigned long flags;
unsigned short idbus; struct input_devinfo id;
unsigned short idvendor;
unsigned short idproduct;
unsigned short idversion;
unsigned long evbit[NBITS(EV_MAX)]; unsigned long evbit[NBITS(EV_MAX)];
unsigned long keybit[NBITS(KEY_MAX)]; unsigned long keybit[NBITS(KEY_MAX)];
......
...@@ -94,8 +94,12 @@ static __inline__ void serio_dev_write_wakeup(struct serio *serio) ...@@ -94,8 +94,12 @@ static __inline__ void serio_dev_write_wakeup(struct serio *serio)
serio->dev->write_wakeup(serio); serio->dev->write_wakeup(serio);
} }
/*
* bit masks for use in "interrupt" flags (3rd argument)
*/
#define SERIO_TIMEOUT 1 #define SERIO_TIMEOUT 1
#define SERIO_PARITY 2 #define SERIO_PARITY 2
#define SERIO_FRAME 4
#define SERIO_TYPE 0xff000000UL #define SERIO_TYPE 0xff000000UL
#define SERIO_XT 0x00000000UL #define SERIO_XT 0x00000000UL
......
...@@ -64,10 +64,7 @@ struct uinput_device { ...@@ -64,10 +64,7 @@ struct uinput_device {
#define UINPUT_MAX_NAME_SIZE 80 #define UINPUT_MAX_NAME_SIZE 80
struct uinput_user_dev { struct uinput_user_dev {
char name[UINPUT_MAX_NAME_SIZE]; char name[UINPUT_MAX_NAME_SIZE];
unsigned short idbus; struct input_devinfo id;
unsigned short idvendor;
unsigned short idproduct;
unsigned short idversion;
int ff_effects_max; int ff_effects_max;
int absmax[ABS_MAX + 1]; int absmax[ABS_MAX + 1];
int absmin[ABS_MAX + 1]; int absmin[ABS_MAX + 1];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment