Merge tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "There are a few more PHY mode changes for allwinner SoC based boards
  with a Realtek PHY after the driver changed its behavior, I assume
  there will be more of these in the future. Also on for Allwinner, the
  Banana Pi M2 board had a regression that led to some devices not
  working because of a slightly incorrect voltage being applied.

  By popular demand, I picked up a change from Krzysztof Kozlowski to
  actually list the SoC tree in the MAINTAINERS file. We don't want to
  get Cc'd on normal patches that are picked up by platform maintainers,
  but the lack of an entry has led to confusion in the past.

  All the other changes are fairly benign, fixing boot-time or
  compile-time warning messages in various places:

   - A dtc warning on the OLPC XO-1.75

   - A boot-time warning on i.MX6 wandboard

   - A harmless compile-time warning

   - A regression causing one of the i.MX6 SoCs to be identified as
     another

   - Missing SoC identification of Allwinner V3 and S3"

* tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  firmware: xilinx: Mark pm_api_features_map with static keyword
  ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs
  MAINTAINERS: add a limited ARM and ARM64 SoC entry
  MAINTAINERS: correct SoC Git address (formerly: arm-soc)
  ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITS
  arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id
  arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id
  ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin
  ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp
  ARM: imx: Use correct SRC base address
  ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY
  ARM: dts: sun8i: v3s: fix GIC node memory range
  ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node
  ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator
  ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY
  ARM: dts: s3: pinecube: align compatible property to other S3 boards
  ARM: sunxi: Add machine match for the Allwinner V3 SoC
  arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet

MAINTAINERS

@@ -1486,10 +1486,20 @@ F:	Documentation/devicetree/bindings/iommu/arm,smmu*
 F:	drivers/iommu/arm/
 F:	drivers/iommu/io-pgtable-arm*
 
+ARM AND ARM64 SoC SUB-ARCHITECTURES (COMMON PARTS)
+M:	Arnd Bergmann <arnd@arndb.de>
+M:	Olof Johansson <olof@lixom.net>
+M:	soc@kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
+F:	arch/arm/boot/dts/Makefile
+F:	arch/arm64/boot/dts/Makefile
+
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
 

arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi

@@ -551,7 +551,7 @@ MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
 
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
 			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
 		>;
 	};

arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi

@@ -166,7 +166,6 @@ MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
 				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 

arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts

@@ -223,8 +223,7 @@ accelerometer@1d {
 };
 
 &ssp3 {
-	/delete-property/ #address-cells;
-	/delete-property/ #size-cells;
+	#address-cells = <0>;
 	spi-slave;
 	status = "okay";
 	ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -132,7 +132,7 @@ &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };

arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts

 /*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -115,7 +115,7 @@ &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/sun8i-s3-pinecube.dts

@@ -10,7 +10,7 @@
 
 / {
 	model = "PineCube IP Camera";
-	compatible = "pine64,pinecube", "allwinner,sun8i-s3";
+	compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
 
 	aliases {
 		serial0 = &uart2;

arch/arm/boot/dts/sun8i-v3s.dtsi

@@ -539,7 +539,7 @@ csi1: camera@1cb4000 {
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
+			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
 			      <0x01c86000 0x2000>;
 			interrupt-controller;

arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts

@@ -120,7 +120,7 @@ &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };
@@ -198,16 +198,16 @@ &reg_aldo3 {
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {

arch/arm/mach-imx/anatop.c

@@ -136,7 +136,7 @@ void __init imx_init_revision_from_anatop(void)
 
 			src_np = of_find_compatible_node(NULL, NULL,
 						     "fsl,imx6ul-src");
-			src_base = of_iomap(np, 0);
+			src_base = of_iomap(src_np, 0);
 			of_node_put(src_np);
 			WARN_ON(!src_base);
 			sbmr2 = readl_relaxed(src_base + SRC_SBMR2);

arch/arm/mach-keystone/memory.h

@@ -6,9 +6,6 @@
 #ifndef __MEMORY_H
 #define __MEMORY_H
 
-#define MAX_PHYSMEM_BITS	36
-#define SECTION_SIZE_BITS	34
-
 #define KEYSTONE_LOW_PHYS_START		0x80000000ULL
 #define KEYSTONE_LOW_PHYS_SIZE		0x80000000ULL /* 2G */
 #define KEYSTONE_LOW_PHYS_END		(KEYSTONE_LOW_PHYS_START + \

arch/arm/mach-sunxi/sunxi.c

@@ -66,6 +66,7 @@ static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-h2-plus",
 	"allwinner,sun8i-h3",
 	"allwinner,sun8i-r40",
+	"allwinner,sun8i-v3",
 	"allwinner,sun8i-v3s",
 	NULL,
 };

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts

@@ -79,7 +79,7 @@ &ehci1 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts

@@ -96,7 +96,7 @@ &emac {
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts

@@ -27,7 +27,7 @@ reg_gmac_3v3: gmac-3v3 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_gmac_3v3>;
 	allwinner,rx-delay-ps = <200>;

drivers/firmware/xilinx/zynqmp.c

@@ -29,7 +29,7 @@
 #define PM_API_FEATURE_CHECK_MAX_ORDER  7
 
 static bool feature_check_enabled;
-DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
+static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
 
 /**
  * struct pm_api_feature_data - PM API Feature data