Commit a32327a3 authored by Roi Dayan's avatar Roi Dayan Committed by Saeed Mahameed

net/mlx5: Lag, Control MultiPort E-Switch single FDB mode

MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.

The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.

This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.

While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.

Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.

Example:
    $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
                  cmode runtime
Signed-off-by: default avatarRoi Dayan <roid@nvidia.com>
Reviewed-by: default avatarMaor Dickman <maord@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
parent 2edd9257
......@@ -54,6 +54,24 @@ parameters.
- Control the number of large groups (size > 1) in the FDB table.
* The default value is 15, and the range is between 1 and 1024.
* - ``esw_multiport``
- Boolean
- runtime
- Control MultiPort E-Switch shared fdb mode.
An experimental mode where a single E-Switch is used and all the vports
and physical ports on the NIC are connected to it.
An example is to send traffic from a VF that is created on PF0 to an
uplink that is natively associated with the uplink of PF1
Note: Future devices, ConnectX-8 and onward, will eventually have this
as the default to allow forwarding between all NIC ports in a single
E-switch environment and the dual E-switch mode will likely get
deprecated.
Default: disabled
The ``mlx5`` driver supports reloading via ``DEVLINK_CMD_RELOAD``
......
......@@ -7,6 +7,7 @@
#include "fw_reset.h"
#include "fs_core.h"
#include "eswitch.h"
#include "lag/lag.h"
#include "esw/qos.h"
#include "sf/dev/dev.h"
#include "sf/sf.h"
......@@ -437,6 +438,53 @@ static int mlx5_devlink_large_group_num_validate(struct devlink *devlink, u32 id
return 0;
}
static int mlx5_devlink_esw_multiport_set(struct devlink *devlink, u32 id,
struct devlink_param_gset_ctx *ctx)
{
struct mlx5_core_dev *dev = devlink_priv(devlink);
if (!MLX5_ESWITCH_MANAGER(dev))
return -EOPNOTSUPP;
if (ctx->val.vbool)
return mlx5_lag_mpesw_enable(dev);
mlx5_lag_mpesw_disable(dev);
return 0;
}
static int mlx5_devlink_esw_multiport_get(struct devlink *devlink, u32 id,
struct devlink_param_gset_ctx *ctx)
{
struct mlx5_core_dev *dev = devlink_priv(devlink);
if (!MLX5_ESWITCH_MANAGER(dev))
return -EOPNOTSUPP;
ctx->val.vbool = mlx5_lag_mpesw_is_activated(dev);
return 0;
}
static int mlx5_devlink_esw_multiport_validate(struct devlink *devlink, u32 id,
union devlink_param_value val,
struct netlink_ext_ack *extack)
{
struct mlx5_core_dev *dev = devlink_priv(devlink);
if (!MLX5_ESWITCH_MANAGER(dev)) {
NL_SET_ERR_MSG_MOD(extack, "E-Switch is unsupported");
return -EOPNOTSUPP;
}
if (mlx5_eswitch_mode(dev) != MLX5_ESWITCH_OFFLOADS) {
NL_SET_ERR_MSG_MOD(extack,
"E-Switch must be in switchdev mode");
return -EBUSY;
}
return 0;
}
#endif
static int mlx5_devlink_eq_depth_validate(struct devlink *devlink, u32 id,
......@@ -455,6 +503,12 @@ static const struct devlink_param mlx5_devlink_params[] = {
BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
NULL, NULL,
mlx5_devlink_large_group_num_validate),
DEVLINK_PARAM_DRIVER(MLX5_DEVLINK_PARAM_ID_ESW_MULTIPORT,
"esw_multiport", DEVLINK_PARAM_TYPE_BOOL,
BIT(DEVLINK_PARAM_CMODE_RUNTIME),
mlx5_devlink_esw_multiport_get,
mlx5_devlink_esw_multiport_set,
mlx5_devlink_esw_multiport_validate),
#endif
DEVLINK_PARAM_GENERIC(IO_EQ_SIZE, BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
NULL, NULL, mlx5_devlink_eq_depth_validate),
......
......@@ -11,6 +11,7 @@ enum mlx5_devlink_param_id {
MLX5_DEVLINK_PARAM_ID_FLOW_STEERING_MODE,
MLX5_DEVLINK_PARAM_ID_ESW_LARGE_GROUP_NUM,
MLX5_DEVLINK_PARAM_ID_ESW_PORT_METADATA,
MLX5_DEVLINK_PARAM_ID_ESW_MULTIPORT,
};
struct mlx5_trap_ctx {
......
......@@ -216,7 +216,6 @@ parse_mirred(struct mlx5e_tc_act_parse_state *parse_state,
struct net_device *uplink_dev;
struct mlx5e_priv *out_priv;
struct mlx5_eswitch *esw;
bool is_uplink_rep;
int *ifindexes;
int if_count;
int err;
......@@ -231,7 +230,6 @@ parse_mirred(struct mlx5e_tc_act_parse_state *parse_state,
parse_state->ifindexes[if_count] = out_dev->ifindex;
parse_state->if_count++;
is_uplink_rep = mlx5e_eswitch_uplink_rep(out_dev);
if (mlx5_lag_mpesw_do_mirred(priv->mdev, out_dev, extack))
return -EOPNOTSUPP;
......@@ -275,13 +273,6 @@ parse_mirred(struct mlx5e_tc_act_parse_state *parse_state,
esw_attr->dests[esw_attr->out_count].rep = rpriv->rep;
esw_attr->dests[esw_attr->out_count].mdev = out_priv->mdev;
/* If output device is bond master then rules are not explicit
* so we don't attempt to count them.
*/
if (is_uplink_rep && MLX5_CAP_PORT_SELECTION(priv->mdev, port_select_flow_table) &&
MLX5_CAP_GEN(priv->mdev, create_lag_when_not_master_up))
attr->lag.count = true;
esw_attr->out_count++;
return 0;
......
......@@ -2152,9 +2152,6 @@ static void mlx5e_tc_del_fdb_flow(struct mlx5e_priv *priv,
free_branch_attr(flow, attr->branch_true);
free_branch_attr(flow, attr->branch_false);
if (flow->attr->lag.count)
mlx5_lag_del_mpesw_rule(esw->dev);
kvfree(attr->esw_attr->rx_tun_attr);
kvfree(attr->parse_attr);
kfree(flow->attr);
......@@ -4314,12 +4311,7 @@ static bool is_lag_dev(struct mlx5e_priv *priv,
static bool is_multiport_eligible(struct mlx5e_priv *priv, struct net_device *out_dev)
{
if (same_hw_reps(priv, out_dev) &&
MLX5_CAP_PORT_SELECTION(priv->mdev, port_select_flow_table) &&
MLX5_CAP_GEN(priv->mdev, create_lag_when_not_master_up))
return true;
return false;
return same_hw_reps(priv, out_dev) && mlx5_lag_mpesw_is_activated(priv->mdev);
}
bool mlx5e_is_valid_eswitch_fwd_dev(struct mlx5e_priv *priv,
......@@ -4621,7 +4613,6 @@ __mlx5e_add_fdb_flow(struct mlx5e_priv *priv,
struct mlx5_core_dev *in_mdev)
{
struct flow_rule *rule = flow_cls_offload_flow_rule(f);
struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
struct netlink_ext_ack *extack = f->common.extack;
struct mlx5e_tc_flow_parse_attr *parse_attr;
struct mlx5e_tc_flow *flow;
......@@ -4654,26 +4645,17 @@ __mlx5e_add_fdb_flow(struct mlx5e_priv *priv,
if (err)
goto err_free;
if (flow->attr->lag.count) {
err = mlx5_lag_add_mpesw_rule(esw->dev);
if (err)
goto err_free;
}
err = mlx5e_tc_add_fdb_flow(priv, flow, extack);
complete_all(&flow->init_done);
if (err) {
if (!(err == -ENETUNREACH && mlx5_lag_is_multipath(in_mdev)))
goto err_lag;
goto err_free;
add_unready_flow(flow);
}
return flow;
err_lag:
if (flow->attr->lag.count)
mlx5_lag_del_mpesw_rule(esw->dev);
err_free:
mlx5e_flow_put(priv, flow);
out:
......
......@@ -92,12 +92,6 @@ struct mlx5_flow_attr {
u32 exe_aso_type;
struct list_head list;
struct mlx5e_post_act_handle *post_act_handle;
struct {
/* Indicate whether the parsed flow should be counted for lag mode decision
* making
*/
bool count;
} lag;
struct mlx5_flow_attr *branch_true;
struct mlx5_flow_attr *branch_false;
struct mlx5_flow_attr *jumping_attr;
......
......@@ -230,7 +230,6 @@ static void mlx5_ldev_free(struct kref *ref)
mlx5_lag_mp_cleanup(ldev);
cancel_delayed_work_sync(&ldev->bond_work);
destroy_workqueue(ldev->wq);
mlx5_lag_mpesw_cleanup(ldev);
mutex_destroy(&ldev->lock);
kfree(ldev);
}
......@@ -276,7 +275,6 @@ static struct mlx5_lag *mlx5_lag_dev_alloc(struct mlx5_core_dev *dev)
mlx5_core_err(dev, "Failed to init multipath lag err=%d\n",
err);
mlx5_lag_mpesw_init(ldev);
ldev->ports = MLX5_CAP_GEN(dev, num_lag_ports);
ldev->buckets = 1;
......@@ -688,7 +686,7 @@ static int mlx5_deactivate_lag(struct mlx5_lag *ldev)
}
#define MLX5_LAG_OFFLOADS_SUPPORTED_PORTS 2
static bool mlx5_lag_check_prereq(struct mlx5_lag *ldev)
bool mlx5_lag_check_prereq(struct mlx5_lag *ldev)
{
#ifdef CONFIG_MLX5_ESWITCH
struct mlx5_core_dev *dev;
......
......@@ -102,6 +102,7 @@ mlx5_lag_is_ready(struct mlx5_lag *ldev)
return test_bit(MLX5_LAG_FLAG_NDEVS_READY, &ldev->state_flags);
}
bool mlx5_lag_check_prereq(struct mlx5_lag *ldev);
void mlx5_modify_lag(struct mlx5_lag *ldev,
struct lag_tracker *tracker);
int mlx5_activate_lag(struct mlx5_lag *ldev,
......
......@@ -7,18 +7,19 @@
#include "eswitch.h"
#include "lib/mlx5.h"
static int add_mpesw_rule(struct mlx5_lag *ldev)
static int enable_mpesw(struct mlx5_lag *ldev)
{
struct mlx5_core_dev *dev = ldev->pf[MLX5_LAG_P1].dev;
int err;
if (atomic_add_return(1, &ldev->lag_mpesw.mpesw_rule_count) != 1)
return 0;
if (ldev->mode != MLX5_LAG_MODE_NONE)
return -EINVAL;
if (ldev->mode != MLX5_LAG_MODE_NONE) {
err = -EINVAL;
goto out_err;
}
if (mlx5_eswitch_mode(dev) != MLX5_ESWITCH_OFFLOADS ||
!MLX5_CAP_PORT_SELECTION(dev, port_select_flow_table) ||
!MLX5_CAP_GEN(dev, create_lag_when_not_master_up) ||
!mlx5_lag_check_prereq(ldev))
return -EOPNOTSUPP;
err = mlx5_activate_lag(ldev, NULL, MLX5_LAG_MODE_MPESW, false);
if (err) {
......@@ -29,14 +30,12 @@ static int add_mpesw_rule(struct mlx5_lag *ldev)
return 0;
out_err:
atomic_dec(&ldev->lag_mpesw.mpesw_rule_count);
return err;
}
static void del_mpesw_rule(struct mlx5_lag *ldev)
static void disable_mpesw(struct mlx5_lag *ldev)
{
if (!atomic_dec_return(&ldev->lag_mpesw.mpesw_rule_count) &&
ldev->mode == MLX5_LAG_MODE_MPESW)
if (ldev->mode == MLX5_LAG_MODE_MPESW)
mlx5_disable_lag(ldev);
}
......@@ -46,12 +45,17 @@ static void mlx5_mpesw_work(struct work_struct *work)
struct mlx5_lag *ldev = mpesww->lag;
mutex_lock(&ldev->lock);
if (ldev->mode_changes_in_progress) {
mpesww->result = -EAGAIN;
goto unlock;
}
if (mpesww->op == MLX5_MPESW_OP_ENABLE)
mpesww->result = add_mpesw_rule(ldev);
mpesww->result = enable_mpesw(ldev);
else if (mpesww->op == MLX5_MPESW_OP_DISABLE)
del_mpesw_rule(ldev);
disable_mpesw(ldev);
unlock:
mutex_unlock(&ldev->lock);
complete(&mpesww->comp);
}
......@@ -86,12 +90,12 @@ static int mlx5_lag_mpesw_queue_work(struct mlx5_core_dev *dev,
return err;
}
void mlx5_lag_del_mpesw_rule(struct mlx5_core_dev *dev)
void mlx5_lag_mpesw_disable(struct mlx5_core_dev *dev)
{
mlx5_lag_mpesw_queue_work(dev, MLX5_MPESW_OP_DISABLE);
}
int mlx5_lag_add_mpesw_rule(struct mlx5_core_dev *dev)
int mlx5_lag_mpesw_enable(struct mlx5_core_dev *dev)
{
return mlx5_lag_mpesw_queue_work(dev, MLX5_MPESW_OP_ENABLE);
}
......@@ -118,13 +122,3 @@ bool mlx5_lag_mpesw_is_activated(struct mlx5_core_dev *dev)
return ldev && ldev->mode == MLX5_LAG_MODE_MPESW;
}
void mlx5_lag_mpesw_init(struct mlx5_lag *ldev)
{
atomic_set(&ldev->lag_mpesw.mpesw_rule_count, 0);
}
void mlx5_lag_mpesw_cleanup(struct mlx5_lag *ldev)
{
WARN_ON(atomic_read(&ldev->lag_mpesw.mpesw_rule_count));
}
......@@ -9,7 +9,6 @@
struct lag_mpesw {
struct work_struct mpesw_work;
atomic_t mpesw_rule_count;
};
enum mpesw_op {
......@@ -29,14 +28,7 @@ int mlx5_lag_mpesw_do_mirred(struct mlx5_core_dev *mdev,
struct net_device *out_dev,
struct netlink_ext_ack *extack);
bool mlx5_lag_mpesw_is_activated(struct mlx5_core_dev *dev);
void mlx5_lag_del_mpesw_rule(struct mlx5_core_dev *dev);
int mlx5_lag_add_mpesw_rule(struct mlx5_core_dev *dev);
#if IS_ENABLED(CONFIG_MLX5_ESWITCH)
void mlx5_lag_mpesw_init(struct mlx5_lag *ldev);
void mlx5_lag_mpesw_cleanup(struct mlx5_lag *ldev);
#else
static inline void mlx5_lag_mpesw_init(struct mlx5_lag *ldev) {}
static inline void mlx5_lag_mpesw_cleanup(struct mlx5_lag *ldev) {}
#endif
void mlx5_lag_mpesw_disable(struct mlx5_core_dev *dev);
int mlx5_lag_mpesw_enable(struct mlx5_core_dev *dev);
#endif /* __MLX5_LAG_MPESW_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment