Commit a331ce63 authored by Andrew Bresticker's avatar Andrew Bresticker Committed by Ralf Baechle

clocksource: mips-gic: Combine with GIC clockevent driver

Combine the GIC clocksource driver with the GIC clockevent driver from
arch/mips/kernel/cevt-gic.c and remove the clockevent driver's separate
Kconfig symbol.
Signed-off-by: default avatarAndrew Bresticker <abrestic@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8132/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent fa5635a2
...@@ -935,10 +935,6 @@ config CEVT_GT641XX ...@@ -935,10 +935,6 @@ config CEVT_GT641XX
config CEVT_R4K config CEVT_R4K
bool bool
config CEVT_GIC
select MIPS_CM
bool
config CEVT_SB1250 config CEVT_SB1250
bool bool
...@@ -1911,15 +1907,6 @@ config FORCE_MAX_ZONEORDER ...@@ -1911,15 +1907,6 @@ config FORCE_MAX_ZONEORDER
The page size is not necessarily 4KB. Keep this in mind The page size is not necessarily 4KB. Keep this in mind
when choosing a value for this option. when choosing a value for this option.
config CEVT_GIC
bool "Use GIC global counter for clock events"
depends on MIPS_GIC && !MIPS_SEAD3
help
Use the GIC global counter for the clock events. The R4K clock
event driver is always present, so if the platform ends up not
detecting a GIC, it will fall back to the R4K timer for the
generation of clock events.
config BOARD_SCACHE config BOARD_SCACHE
bool bool
......
...@@ -57,7 +57,7 @@ extern int gic_clockevent_init(void); ...@@ -57,7 +57,7 @@ extern int gic_clockevent_init(void);
static inline int mips_clockevent_init(void) static inline int mips_clockevent_init(void)
{ {
#if defined(CONFIG_CEVT_GIC) #if defined(CONFIG_CLKSRC_MIPS_GIC)
return (gic_clockevent_init() | r4k_clockevent_init()); return (gic_clockevent_init() | r4k_clockevent_init());
#elif defined(CONFIG_CEVT_R4K) #elif defined(CONFIG_CEVT_R4K)
return r4k_clockevent_init(); return r4k_clockevent_init();
......
...@@ -19,7 +19,6 @@ endif ...@@ -19,7 +19,6 @@ endif
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o
obj-$(CONFIG_CEVT_GIC) += cevt-gic.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2013 Imagination Technologies Ltd.
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/smp.h>
#include <linux/irq.h>
#include <linux/irqchip/mips-gic.h>
#include <asm/time.h>
#include <asm/mips-boards/maltaint.h>
DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
int gic_timer_irq_installed;
static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
{
u64 cnt;
int res;
cnt = gic_read_count();
cnt += (u64)delta;
gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask));
res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
return res;
}
void gic_set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
/* Nothing to do ... */
}
irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
{
struct clock_event_device *cd;
int cpu = smp_processor_id();
gic_write_compare(gic_read_compare());
cd = &per_cpu(gic_clockevent_device, cpu);
cd->event_handler(cd);
return IRQ_HANDLED;
}
struct irqaction gic_compare_irqaction = {
.handler = gic_compare_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "timer",
};
void gic_event_handler(struct clock_event_device *dev)
{
}
int gic_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
unsigned int irq;
if (!cpu_has_counter || !gic_frequency)
return -ENXIO;
irq = MIPS_GIC_IRQ_BASE + GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
cd = &per_cpu(gic_clockevent_device, cpu);
cd->name = "MIPS GIC";
cd->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_C3STOP;
clockevent_set_clock(cd, gic_frequency);
/* Calculate the min / max delta */
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
cd->rating = 300;
cd->irq = irq;
cd->cpumask = cpumask_of(cpu);
cd->set_next_event = gic_next_event;
cd->set_mode = gic_set_clock_mode;
cd->event_handler = gic_event_handler;
clockevents_register_device(cd);
if (!gic_timer_irq_installed) {
setup_percpu_irq(irq, &gic_compare_irqaction);
gic_timer_irq_installed = 1;
}
enable_percpu_irq(irq, IRQ_TYPE_NONE);
return 0;
}
...@@ -5,10 +5,100 @@ ...@@ -5,10 +5,100 @@
* *
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/ */
#include <linux/clockchips.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irqchip/mips-gic.h> #include <linux/irqchip/mips-gic.h>
#include <linux/percpu.h>
#include <linux/smp.h>
#include <linux/time.h> #include <linux/time.h>
#include <asm/time.h>
DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
int gic_timer_irq_installed;
static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
{
u64 cnt;
int res;
cnt = gic_read_count();
cnt += (u64)delta;
gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask));
res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
return res;
}
void gic_set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
/* Nothing to do ... */
}
irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
{
struct clock_event_device *cd;
int cpu = smp_processor_id();
gic_write_compare(gic_read_compare());
cd = &per_cpu(gic_clockevent_device, cpu);
cd->event_handler(cd);
return IRQ_HANDLED;
}
struct irqaction gic_compare_irqaction = {
.handler = gic_compare_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "timer",
};
void gic_event_handler(struct clock_event_device *dev)
{
}
int gic_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
unsigned int irq;
if (!cpu_has_counter || !gic_frequency)
return -ENXIO;
irq = MIPS_GIC_IRQ_BASE + GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
cd = &per_cpu(gic_clockevent_device, cpu);
cd->name = "MIPS GIC";
cd->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_C3STOP;
clockevent_set_clock(cd, gic_frequency);
/* Calculate the min / max delta */
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
cd->rating = 300;
cd->irq = irq;
cd->cpumask = cpumask_of(cpu);
cd->set_next_event = gic_next_event;
cd->set_mode = gic_set_clock_mode;
cd->event_handler = gic_event_handler;
clockevents_register_device(cd);
if (!gic_timer_irq_installed) {
setup_percpu_irq(irq, &gic_compare_irqaction);
gic_timer_irq_installed = 1;
}
enable_percpu_irq(irq, IRQ_TYPE_NONE);
return 0;
}
static cycle_t gic_hpt_read(struct clocksource *cs) static cycle_t gic_hpt_read(struct clocksource *cs)
{ {
return gic_read_count(); return gic_read_count();
......
...@@ -103,7 +103,7 @@ static inline void gic_map_to_vpe(unsigned int intr, unsigned int vpe) ...@@ -103,7 +103,7 @@ static inline void gic_map_to_vpe(unsigned int intr, unsigned int vpe)
GIC_SH_MAP_TO_VPE_REG_BIT(vpe)); GIC_SH_MAP_TO_VPE_REG_BIT(vpe));
} }
#if defined(CONFIG_CLKSRC_MIPS_GIC) || defined(CONFIG_CEVT_GIC) #ifdef CONFIG_CLKSRC_MIPS_GIC
cycle_t gic_read_count(void) cycle_t gic_read_count(void)
{ {
unsigned int hi, hi2, lo; unsigned int hi, hi2, lo;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment