pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control

R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019
changed the configuration bits for drive and bias control for the
DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3.
Update the driver to reflect this.

After this, the handling of drive and bias control for the various
DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W,
M3-W+, and M3-N SoCs.

Fixes: 86c045c2 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191113101653.28428-1-geert+renesas@glider.be

drivers/pinctrl/sh-pfc/pfc-r8a77965.c

@@ -5998,7 +5998,7 @@ static const struct pinmux_drive_reg pinmux_drive_regs[] = {
 		{ PIN_DU_DOTCLKIN1,    0, 2 },	/* DU_DOTCLKIN1 */
 	} },
 	{ PINMUX_DRIVE_REG("DRVCTRL12", 0xe6060330) {
-		{ PIN_DU_DOTCLKIN3,   28, 2 },	/* DU_DOTCLKIN3 */
+		{ PIN_DU_DOTCLKIN3,   24, 2 },	/* DU_DOTCLKIN3 */
 		{ PIN_FSCLKST,        20, 2 },	/* FSCLKST */
 		{ PIN_TMS,             4, 2 },	/* TMS */
 	} },
@@ -6254,8 +6254,8 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
 		[31] = PIN_DU_DOTCLKIN1,	/* DU_DOTCLKIN1 */
 	} },
 	{ PINMUX_BIAS_REG("PUEN3", 0xe606040c, "PUD3", 0xe606044c) {
-		[ 0] = PIN_DU_DOTCLKIN3,	/* DU_DOTCLKIN3 */
-		[ 1] = SH_PFC_PIN_NONE,
+		[ 0] = SH_PFC_PIN_NONE,
+		[ 1] = PIN_DU_DOTCLKIN3,	/* DU_DOTCLKIN3 */
 		[ 2] = PIN_FSCLKST,		/* FSCLKST */
 		[ 3] = PIN_EXTALR,		/* EXTALR*/
 		[ 4] = PIN_TRST_N,		/* TRST# */