Commit a38488f5 authored by Jacob Keller's avatar Jacob Keller Committed by Jeff Kirsher

fm10k: force LPORT delete when updating VLAN or MAC address

Currently, we don't notify the switch at all when the PF
administratively sets a new VLAN or MAC address. This causes the old
addresses to remain valid on the switch table. Since the PF is
overriding any configuration done directly by the VF, we choose to
simply re-create the LPORT for the VF. This does mean that all rules for
the VF will be dropped when we set something directly via the PF, but it
prevents some weird issues where the MAC/VLAN table retains some stale
configuration.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent c04ae58e
......@@ -400,11 +400,31 @@ int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs)
return num_vfs;
}
static inline void fm10k_reset_vf_info(struct fm10k_intfc *interface,
struct fm10k_vf_info *vf_info)
{
struct fm10k_hw *hw = &interface->hw;
/* assigning the MAC address will send a mailbox message */
fm10k_mbx_lock(interface);
/* disable LPORT for this VF which clears switch rules */
hw->iov.ops.reset_lport(hw, vf_info);
/* assign new MAC+VLAN for this VF */
hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
/* re-enable the LPORT for this VF */
hw->iov.ops.set_lport(hw, vf_info, vf_info->vf_idx,
FM10K_VF_FLAG_MULTI_CAPABLE);
fm10k_mbx_unlock(interface);
}
int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac)
{
struct fm10k_intfc *interface = netdev_priv(netdev);
struct fm10k_iov_data *iov_data = interface->iov_data;
struct fm10k_hw *hw = &interface->hw;
struct fm10k_vf_info *vf_info;
/* verify SR-IOV is active and that vf idx is valid */
......@@ -419,13 +439,7 @@ int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac)
vf_info = &iov_data->vf_info[vf_idx];
ether_addr_copy(vf_info->mac, mac);
/* assigning the MAC will send a mailbox message so lock is needed */
fm10k_mbx_lock(interface);
/* assign MAC address to VF */
hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
fm10k_mbx_unlock(interface);
fm10k_reset_vf_info(interface, vf_info);
return 0;
}
......@@ -455,16 +469,10 @@ int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid,
/* record default VLAN ID for VF */
vf_info->pf_vid = vid;
/* assigning the VLAN will send a mailbox message so lock is needed */
fm10k_mbx_lock(interface);
/* Clear the VLAN table for the VF */
hw->mac.ops.update_vlan(hw, FM10K_VLAN_ALL, vf_info->vsi, false);
/* Update VF assignment and trigger reset */
hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
fm10k_mbx_unlock(interface);
fm10k_reset_vf_info(interface, vf_info);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment