Commit a41a1f86 authored by Sergio Paracuellos's avatar Sergio Paracuellos Committed by Greg Kroah-Hartman

staging: mt7621-pci: factor out 'mt7621_pcie_enable_ports' function

Driver probe function check for a bit in 'pcie_link_status' for
enabling the pcie port or not. Instead of this add 'enabled' field
in 'mt7621_pcie_port' structure and check its value to achieve this
inside a new 'mt7621_pcie_enable_ports' function. The offsets for
the correct port are derived from the slot of the port. This field
'enabled' is properly initilized in 'mt7621_pcie_init_port'. Also
depending of the number of ports enabled we have to properly init
its registers taking into account that we will use virtual bridges
from zero to num_slots_enabled as follows:
    - Only one enabled -> only enable virtual bridge 0.
    - Two enabled -> enable virtual bridges 0 and 1.
    - Three enabled -> enable virtual bridges 0, 1 and 2.
Signed-off-by: default avatarSergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d9365507
......@@ -61,9 +61,8 @@
#define RALINK_PCI_PCICFG_ADDR 0x0000
#define RALINK_PCI_PCIMSK_ADDR 0x000C
#define RT6855_PCIE0_OFFSET 0x2000
#define RT6855_PCIE1_OFFSET 0x3000
#define RT6855_PCIE2_OFFSET 0x4000
#define MT7621_PCIE_OFFSET 0x2000
#define MT7621_NEXT_PORT 0x1000
#define RALINK_PCI_BAR0SETUP_ADDR 0x0010
#define RALINK_PCI_IMBASEBAR0_ADDR 0x0018
......@@ -158,6 +157,7 @@ static int pcie_link_status;
* @pcie_rst: pointer to port reset control
* @pcie_clk: PCIe clock
* @slot: port slot
* @enabled: indicates if port is enabled
*/
struct mt7621_pcie_port {
void __iomem *base;
......@@ -167,6 +167,7 @@ struct mt7621_pcie_port {
struct reset_control *pcie_rst;
struct clk *pcie_clk;
u32 slot;
bool enabled;
};
/**
......@@ -589,8 +590,10 @@ static int mt7621_pcie_init_port(struct mt7621_pcie_port *port)
reset_control_assert(port->pcie_rst);
rt_sysc_m32(BIT(24 + slot), 0, RALINK_CLKCFG1);
pcie_link_status &= ~(1 << slot);
port->enabled = false;
} else {
pcie_link_status |= BIT(slot);
port->enabled = true;
val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
/* enable pcie interrupt */
val |= BIT(20 + slot);
......@@ -605,6 +608,41 @@ static int mt7621_pcie_init_port(struct mt7621_pcie_port *port)
return 0;
}
static void mt7621_pcie_enable_ports(struct mt7621_pcie *pcie)
{
struct device *dev = pcie->dev;
struct mt7621_pcie_port *port;
u8 num_slots_enabled = 0;
u32 offset;
u32 slot;
u32 val;
list_for_each_entry(port, &pcie->ports, list) {
slot = port->slot;
offset = MT7621_PCIE_OFFSET + (slot * MT7621_NEXT_PORT);
if (port->enabled) {
/* open 7FFF:2G; ENABLE */
pcie_write(pcie, 0x7FFF0001,
offset + RALINK_PCI_BAR0SETUP_ADDR);
pcie_write(pcie, MEMORY_BASE,
offset + RALINK_PCI_IMBASEBAR0_ADDR);
pcie_write(pcie, 0x06040001, offset + RALINK_PCI_CLASS);
dev_info(dev, "PCIE%d enabled\n", slot);
num_slots_enabled++;
}
}
for (slot = 0; slot < num_slots_enabled; slot++) {
val = read_config(pcie, slot, 0x4);
write_config(pcie, slot, 0x4, val | 0x4);
val = read_config(pcie, slot, 0x70c);
val &= ~(0xff) << 8;
val |= 0x50 << 8;
write_config(pcie, slot, 0x70c, val);
}
}
static int mt7621_pcie_request_resources(struct mt7621_pcie *pcie,
struct list_head *res)
{
......@@ -764,67 +802,7 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
pcie_write(pcie, RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
//PCIe0
if ((pcie_link_status & 0x1) != 0) {
/* open 7FFF:2G; ENABLE */
pcie_write(pcie, 0x7FFF0001,
RT6855_PCIE0_OFFSET + RALINK_PCI_BAR0SETUP_ADDR);
pcie_write(pcie, MEMORY_BASE,
RT6855_PCIE0_OFFSET + RALINK_PCI_IMBASEBAR0_ADDR);
pcie_write(pcie, 0x06040001,
RT6855_PCIE0_OFFSET + RALINK_PCI_CLASS);
dev_info(dev, "PCIE0 enabled\n");
}
//PCIe1
if ((pcie_link_status & 0x2) != 0) {
/* open 7FFF:2G; ENABLE */
pcie_write(pcie, 0x7FFF0001,
RT6855_PCIE1_OFFSET + RALINK_PCI_BAR0SETUP_ADDR);
pcie_write(pcie, MEMORY_BASE,
RT6855_PCIE1_OFFSET + RALINK_PCI_IMBASEBAR0_ADDR);
pcie_write(pcie, 0x06040001,
RT6855_PCIE1_OFFSET + RALINK_PCI_CLASS);
dev_info(dev, "PCIE1 enabled\n");
}
//PCIe2
if ((pcie_link_status & 0x4) != 0) {
/* open 7FFF:2G; ENABLE */
pcie_write(pcie, 0x7FFF0001,
RT6855_PCIE2_OFFSET + RALINK_PCI_BAR0SETUP_ADDR);
pcie_write(pcie, MEMORY_BASE,
RT6855_PCIE2_OFFSET + RALINK_PCI_IMBASEBAR0_ADDR);
pcie_write(pcie, 0x06040001,
RT6855_PCIE2_OFFSET + RALINK_PCI_CLASS);
dev_info(dev, "PCIE2 enabled\n");
}
switch (pcie_link_status) {
case 7:
val = read_config(pcie, 2, 0x4);
write_config(pcie, 2, 0x4, val | 0x4);
val = read_config(pcie, 2, 0x70c);
val &= ~(0xff) << 8;
val |= 0x50 << 8;
write_config(pcie, 2, 0x70c, val);
case 3:
case 5:
case 6:
val = read_config(pcie, 1, 0x4);
write_config(pcie, 1, 0x4, val | 0x4);
val = read_config(pcie, 1, 0x70c);
val &= ~(0xff) << 8;
val |= 0x50 << 8;
write_config(pcie, 1, 0x70c, val);
default:
val = read_config(pcie, 0, 0x4);
write_config(pcie, 0, 0x4, val | 0x4); //bus master enable
val = read_config(pcie, 0, 0x70c);
val &= ~(0xff) << 8;
val |= 0x50 << 8;
write_config(pcie, 0, 0x70c, val);
}
mt7621_pcie_enable_ports(pcie);
err = mt7621_pci_parse_request_of_pci_ranges(pcie);
if (err) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment