Commit a422c6a9 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson

arm64: dts: qcom: sm8250-edo: Rectify gpio-keys

Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.

Fixes: 46e14907 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: default avatarMarijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.orgSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 2de55db6
......@@ -20,6 +20,8 @@ &framebuffer {
};
&gpio_keys {
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
g-assist-key {
label = "Google Assistant Key";
linux,code = <KEY_LEFTMETA>;
......@@ -48,6 +50,14 @@ &pm8150_gpios {
"SP_ARI_PWR_ALARM",
"NC",
"NC"; /* GPIO_10 */
g_assist_n: g-assist-n-state {
pins = "gpio6";
function = "normal";
power-source = <1>;
bias-pull-up;
input-enable;
};
};
&pm8150b_gpios {
......
......@@ -51,12 +51,26 @@ framebuffer: framebuffer@9c000000 {
gpio_keys: gpio-keys {
compatible = "gpio-keys";
/*
* Camera focus (light press) and camera snapshot (full press)
* seem not to work properly.. Adding the former one stalls the CPU
* and the latter kills the volume down key for whatever reason. In any
* case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
*/
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
pinctrl-names = "default";
key-camera-focus {
label = "Camera Focus";
linux,code = <KEY_CAMERA_FOCUS>;
gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
key-camera-snapshot {
label = "Camera Snapshot";
linux,code = <KEY_CAMERA>;
gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
key-vol-down {
label = "Volume Down";
......@@ -544,6 +558,34 @@ &pcie2_phy {
vdda-pll-supply = <&vreg_l9a_1p2>;
};
&pm8150_gpios {
vol_down_n: vol-down-n-state {
pins = "gpio1";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pm8150b_gpios {
snapshot_n: snapshot-n-state {
pins = "gpio1";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
focus_n: focus-n-state {
pins = "gpio2";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pon_pwrkey {
status = "okay";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment