arm64: dts: renesas: r8a779g0: Fix HSCIF0 "brg_int" clock

As serial communication requires a clock signal, the High Speed Serial
Communication Interfaces with FIFO (HSCIF) are clocked by a clock that
is not affected by Spread Spectrum or Fractional Multiplication.

Hence change the clock input for the HSCIF0 Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car V4H Hardware User's Manual rev. 0.54.

Fixes: 987da486 ("arm64: dts: renesas: Add Renesas R8A779G0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/a5bd4148f92806f7c8e577d383370f810315f586.1665155947.git.geert+renesas@glider.be

arch/arm64/boot/dts/renesas/r8a779g0.dtsi

@@ -360,7 +360,7 @@ hscif0: serial@e6540000 {
 			reg = <0 0xe6540000 0 96>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
-				 <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x31>, <&dmac0 0x30>,