ASoC: es8316: Replace NR_SUPPORTED_MCLK_LRCK_RATIOS with ARRAY_SIZE()

No need for a special define since we can use ARRAY_SIZE() directly,
and won't need to worry to keep it in sync.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-3-posteuca@mutex.oneSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/es8316.c

@@ -27,7 +27,6 @@
  * MCLK/LRCK ratios, but we also add ratio 400, which is commonly used on
  * Intel Cherry Trail platforms (19.2MHz MCLK, 48kHz LRCK).
  */
-#define NR_SUPPORTED_MCLK_LRCK_RATIOS ARRAY_SIZE(supported_mclk_lrck_ratios)
 static const unsigned int supported_mclk_lrck_ratios[] = {
 	256, 384, 400, 500, 512, 768, 1024
 };
@@ -40,7 +39,7 @@ struct es8316_priv {
 	struct snd_soc_jack *jack;
 	int irq;
 	unsigned int sysclk;
-	unsigned int allowed_rates[NR_SUPPORTED_MCLK_LRCK_RATIOS];
+	unsigned int allowed_rates[ARRAY_SIZE(supported_mclk_lrck_ratios)];
 	struct snd_pcm_hw_constraint_list sysclk_constraints;
 	bool jd_inverted;
 };
@@ -382,7 +381,7 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	/* Limit supported sample rates to ones that can be autodetected
 	 * by the codec running in slave mode.
 	 */
-	for (i = 0; i < NR_SUPPORTED_MCLK_LRCK_RATIOS; i++) {
+	for (i = 0; i < ARRAY_SIZE(supported_mclk_lrck_ratios); i++) {
 		const unsigned int ratio = supported_mclk_lrck_ratios[i];
 
 		if (freq % ratio == 0)
@@ -472,7 +471,7 @@ static int es8316_pcm_hw_params(struct snd_pcm_substream *substream,
 	int i;
 
 	/* Validate supported sample rates that are autodetected from MCLK */
-	for (i = 0; i < NR_SUPPORTED_MCLK_LRCK_RATIOS; i++) {
+	for (i = 0; i < ARRAY_SIZE(supported_mclk_lrck_ratios); i++) {
 		const unsigned int ratio = supported_mclk_lrck_ratios[i];
 
 		if (es8316->sysclk % ratio != 0)
@@ -480,7 +479,7 @@ static int es8316_pcm_hw_params(struct snd_pcm_substream *substream,
 		if (es8316->sysclk / ratio == params_rate(params))
 			break;
 	}
-	if (i == NR_SUPPORTED_MCLK_LRCK_RATIOS)
+	if (i == ARRAY_SIZE(supported_mclk_lrck_ratios))
 		return -EINVAL;
 	lrck_divider = es8316->sysclk / params_rate(params);
 	bclk_divider = lrck_divider / 4;