wifi: rtw89: 8852b: update BSS color mapping register

BSS color mapping register is different per IC, therefore, move this
register to chip_info and update the setting function. Without this patch,
wrong BSS color causes behavior abnormal, especially DL-OFDMA.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221214091803.41293-1-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/core.h

@@ -2811,6 +2811,7 @@ struct rtw89_chip_info {
 	u8 dcfo_comp_sft;
 	const struct rtw89_imr_info *imr_info;
 	const struct rtw89_rrsr_cfgs *rrsr_cfgs;
+	u32 bss_clr_map_reg;
 	u32 dma_ch_mask;
 	const struct wiphy_wowlan_support *wowlan_stub;
 };

drivers/net/wireless/realtek/rtw89/phy.c

@@ -4117,6 +4117,7 @@ void rtw89_phy_dm_init(struct rtw89_dev *rtwdev)
 
 void rtw89_phy_set_bss_color(struct rtw89_dev *rtwdev, struct ieee80211_vif *vif)
 {
+	const struct rtw89_chip_info *chip = rtwdev->chip;
 	enum rtw89_phy_idx phy_idx = RTW89_PHY_0;
 	u8 bss_color;
 
@@ -4125,11 +4126,11 @@ void rtw89_phy_set_bss_color(struct rtw89_dev *rtwdev, struct ieee80211_vif *vif
 
 	bss_color = vif->bss_conf.he_bss_color.color;
 
-	rtw89_phy_write32_idx(rtwdev, R_BSS_CLR_MAP, B_BSS_CLR_MAP_VLD0, 0x1,
-			      phy_idx);
-	rtw89_phy_write32_idx(rtwdev, R_BSS_CLR_MAP, B_BSS_CLR_MAP_TGT, bss_color,
+	rtw89_phy_write32_idx(rtwdev, chip->bss_clr_map_reg, B_BSS_CLR_MAP_VLD0, 0x1,
 			      phy_idx);
-	rtw89_phy_write32_idx(rtwdev, R_BSS_CLR_MAP, B_BSS_CLR_MAP_STAID,
+	rtw89_phy_write32_idx(rtwdev, chip->bss_clr_map_reg, B_BSS_CLR_MAP_TGT,
+			      bss_color, phy_idx);
+	rtw89_phy_write32_idx(rtwdev, chip->bss_clr_map_reg, B_BSS_CLR_MAP_STAID,
 			      vif->cfg.aid, phy_idx);
 }
 

drivers/net/wireless/realtek/rtw89/reg.h

@@ -4108,6 +4108,7 @@
 #define R_SEG0CSI_EN 0x42C4
 #define B_SEG0CSI_EN BIT(23)
 #define R_BSS_CLR_MAP 0x43ac
+#define R_BSS_CLR_MAP_V1 0x43B0
 #define B_BSS_CLR_MAP_VLD0 BIT(28)
 #define B_BSS_CLR_MAP_TGT GENMASK(27, 22)
 #define B_BSS_CLR_MAP_STAID GENMASK(21, 11)

drivers/net/wireless/realtek/rtw89/rtw8852a.c

@@ -2135,6 +2135,7 @@ const struct rtw89_chip_info rtw8852a_chip_info = {
 	.dcfo_comp_sft		= 3,
 	.imr_info		= &rtw8852a_imr_info,
 	.rrsr_cfgs		= &rtw8852a_rrsr_cfgs,
+	.bss_clr_map_reg	= R_BSS_CLR_MAP,
 	.dma_ch_mask		= 0,
 #ifdef CONFIG_PM
 	.wowlan_stub		= &rtw_wowlan_stub_8852a,

drivers/net/wireless/realtek/rtw89/rtw8852b.c

@@ -2512,6 +2512,7 @@ const struct rtw89_chip_info rtw8852b_chip_info = {
 	.dcfo_comp_sft		= 3,
 	.imr_info		= &rtw8852b_imr_info,
 	.rrsr_cfgs		= &rtw8852b_rrsr_cfgs,
+	.bss_clr_map_reg	= R_BSS_CLR_MAP_V1,
 	.dma_ch_mask		= BIT(RTW89_DMA_ACH4) | BIT(RTW89_DMA_ACH5) |
 				  BIT(RTW89_DMA_ACH6) | BIT(RTW89_DMA_ACH7) |
 				  BIT(RTW89_DMA_B1MG) | BIT(RTW89_DMA_B1HI),

drivers/net/wireless/realtek/rtw89/rtw8852c.c

@@ -2945,6 +2945,7 @@ const struct rtw89_chip_info rtw8852c_chip_info = {
 	.dcfo_comp_sft		= 5,
 	.imr_info		= &rtw8852c_imr_info,
 	.rrsr_cfgs		= &rtw8852c_rrsr_cfgs,
+	.bss_clr_map_reg	= R_BSS_CLR_MAP,
 	.dma_ch_mask		= 0,
 #ifdef CONFIG_PM
 	.wowlan_stub		= &rtw_wowlan_stub_8852c,