Commit a4fc088a authored by Yinjun Zhang's avatar Yinjun Zhang Committed by Jakub Kicinski

ethtool: fix the check logic of at least one channel for RX/TX

The command "ethtool -L <intf> combined 0" may clean the RX/TX channel
count and skip the error path, since the attrs
tb[ETHTOOL_A_CHANNELS_RX_COUNT] and tb[ETHTOOL_A_CHANNELS_TX_COUNT]
are NULL in this case when recent ethtool is used.

Tested using ethtool v5.10.

Fixes: 7be92514 ("ethtool: check if there is at least one channel for TX/RX in the core")
Signed-off-by: default avatarYinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: default avatarSimon Horman <simon.horman@netronome.com>
Signed-off-by: default avatarLouis Peens <louis.peens@netronome.com>
Link: https://lore.kernel.org/r/20210225125102.23989-1-simon.horman@netronome.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent eee7ede6
......@@ -116,10 +116,9 @@ int ethnl_set_channels(struct sk_buff *skb, struct genl_info *info)
struct ethtool_channels channels = {};
struct ethnl_req_info req_info = {};
struct nlattr **tb = info->attrs;
const struct nlattr *err_attr;
u32 err_attr, max_rx_in_use = 0;
const struct ethtool_ops *ops;
struct net_device *dev;
u32 max_rx_in_use = 0;
int ret;
ret = ethnl_parse_header_dev_get(&req_info,
......@@ -157,34 +156,35 @@ int ethnl_set_channels(struct sk_buff *skb, struct genl_info *info)
/* ensure new channel counts are within limits */
if (channels.rx_count > channels.max_rx)
err_attr = tb[ETHTOOL_A_CHANNELS_RX_COUNT];
err_attr = ETHTOOL_A_CHANNELS_RX_COUNT;
else if (channels.tx_count > channels.max_tx)
err_attr = tb[ETHTOOL_A_CHANNELS_TX_COUNT];
err_attr = ETHTOOL_A_CHANNELS_TX_COUNT;
else if (channels.other_count > channels.max_other)
err_attr = tb[ETHTOOL_A_CHANNELS_OTHER_COUNT];
err_attr = ETHTOOL_A_CHANNELS_OTHER_COUNT;
else if (channels.combined_count > channels.max_combined)
err_attr = tb[ETHTOOL_A_CHANNELS_COMBINED_COUNT];
err_attr = ETHTOOL_A_CHANNELS_COMBINED_COUNT;
else
err_attr = NULL;
err_attr = 0;
if (err_attr) {
ret = -EINVAL;
NL_SET_ERR_MSG_ATTR(info->extack, err_attr,
NL_SET_ERR_MSG_ATTR(info->extack, tb[err_attr],
"requested channel count exceeds maximum");
goto out_ops;
}
/* ensure there is at least one RX and one TX channel */
if (!channels.combined_count && !channels.rx_count)
err_attr = tb[ETHTOOL_A_CHANNELS_RX_COUNT];
err_attr = ETHTOOL_A_CHANNELS_RX_COUNT;
else if (!channels.combined_count && !channels.tx_count)
err_attr = tb[ETHTOOL_A_CHANNELS_TX_COUNT];
err_attr = ETHTOOL_A_CHANNELS_TX_COUNT;
else
err_attr = NULL;
err_attr = 0;
if (err_attr) {
if (mod_combined)
err_attr = tb[ETHTOOL_A_CHANNELS_COMBINED_COUNT];
err_attr = ETHTOOL_A_CHANNELS_COMBINED_COUNT;
ret = -EINVAL;
NL_SET_ERR_MSG_ATTR(info->extack, err_attr, "requested channel counts would result in no RX or TX channel being configured");
NL_SET_ERR_MSG_ATTR(info->extack, tb[err_attr],
"requested channel counts would result in no RX or TX channel being configured");
goto out_ops;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment