Merge tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Some late pin control fixes, the most generally annoying will probably
  be the AMD IRQ storm fix affecting the Microsoft surface.

  Summary:

   - Three fixes pertaining to Broadcom DT bindings. Some stuff didn't
     work out as inteded, we need to back out

   - A resume bug fix in the STM32 driver

   - Disable and mask the interrupts on probe in the AMD pinctrl driver,
     affecting Microsoft surface"

* tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: disable and mask interrupts on probe
  pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()
  Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"
  dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example
  Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"

Documentation/devicetree/bindings/mfd/brcm,cru.yaml

@@ -32,13 +32,13 @@ properties:
   "#size-cells":
     const: 1
 
-  pinctrl:
-    $ref: ../pinctrl/brcm,ns-pinmux.yaml
-
 patternProperties:
   '^clock-controller@[a-f0-9]+$':
     $ref: ../clock/brcm,iproc-clocks.yaml
 
+  '^pin-controller@[a-f0-9]+$':
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
   '^thermal@[a-f0-9]+$':
     $ref: ../thermal/brcm,ns-thermal.yaml
 
@@ -73,9 +73,10 @@ examples:
                                  "iprocfast", "sata1", "sata2";
         };
 
-        pinctrl {
+        pin-controller@1c0 {
             compatible = "brcm,bcm4708-pinmux";
-            offset = <0x1c0>;
+            reg = <0x1c0 0x24>;
+            reg-names = "cru_gpio_control";
         };
 
         thermal@2c0 {

Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

@@ -17,9 +17,6 @@ description:
 
   A list of pins varies across chipsets so few bindings are available.
 
-  Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
-  node.
-
 properties:
   compatible:
     enum:
@@ -27,10 +24,11 @@ properties:
       - brcm,bcm4709-pinmux
       - brcm,bcm53012-pinmux
 
-  offset:
-    description: offset of pin registers in the CRU block
+  reg:
     maxItems: 1
-    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  reg-names:
+    const: cru_gpio_control
 
 patternProperties:
   '-pins$':
@@ -72,23 +70,20 @@ allOf:
                         uart1_grp ]
 
 required:
-  - offset
+  - reg
+  - reg-names
 
 additionalProperties: false
 
 examples:
   - |
-    cru@1800c100 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x1800c100 0x1a4>;
-
-        pinctrl {
-            compatible = "brcm,bcm4708-pinmux";
-            offset = <0xc0>;
-
-            spi-pins {
-                function = "spi";
-                groups = "spi_grp";
-            };
+    pin-controller@1800c1c0 {
+        compatible = "brcm,bcm4708-pinmux";
+        reg = <0x1800c1c0 0x24>;
+        reg-names = "cru_gpio_control";
+
+        spi-pins {
+            function = "spi";
+            groups = "spi_grp";
         };
     };

drivers/pinctrl/bcm/pinctrl-ns.c

@@ -5,7 +5,6 @@
 
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -13,7 +12,6 @@
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
-#include <linux/regmap.h>
 #include <linux/slab.h>
 
 #define FLAG_BCM4708		BIT(1)
@@ -24,8 +22,7 @@ struct ns_pinctrl {
 	struct device *dev;
 	unsigned int chipset_flag;
 	struct pinctrl_dev *pctldev;
-	struct regmap *regmap;
-	u32 offset;
+	void __iomem *base;
 
 	struct pinctrl_desc pctldesc;
 	struct ns_pinctrl_group *groups;
@@ -232,9 +229,9 @@ static int ns_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
 		unset |= BIT(pin_number);
 	}
 
-	regmap_read(ns_pinctrl->regmap, ns_pinctrl->offset, &tmp);
+	tmp = readl(ns_pinctrl->base);
 	tmp &= ~unset;
-	regmap_write(ns_pinctrl->regmap, ns_pinctrl->offset, tmp);
+	writel(tmp, ns_pinctrl->base);
 
 	return 0;
 }
@@ -266,13 +263,13 @@ static const struct of_device_id ns_pinctrl_of_match_table[] = {
 static int ns_pinctrl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
 	const struct of_device_id *of_id;
 	struct ns_pinctrl *ns_pinctrl;
 	struct pinctrl_desc *pctldesc;
 	struct pinctrl_pin_desc *pin;
 	struct ns_pinctrl_group *group;
 	struct ns_pinctrl_function *function;
+	struct resource *res;
 	int i;
 
 	ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL);
@@ -290,18 +287,12 @@ static int ns_pinctrl_probe(struct platform_device *pdev)
 		return -EINVAL;
 	ns_pinctrl->chipset_flag = (uintptr_t)of_id->data;
 
-	ns_pinctrl->regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(ns_pinctrl->regmap)) {
-		int err = PTR_ERR(ns_pinctrl->regmap);
-
-		dev_err(dev, "Failed to map pinctrl regs: %d\n", err);
-
-		return err;
-	}
-
-	if (of_property_read_u32(np, "offset", &ns_pinctrl->offset)) {
-		dev_err(dev, "Failed to get register offset\n");
-		return -ENOENT;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "cru_gpio_control");
+	ns_pinctrl->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ns_pinctrl->base)) {
+		dev_err(dev, "Failed to map pinctrl regs\n");
+		return PTR_ERR(ns_pinctrl->base);
 	}
 
 	memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc));

drivers/pinctrl/pinctrl-amd.c

@@ -840,6 +840,34 @@ static const struct pinconf_ops amd_pinconf_ops = {
 	.pin_config_group_set = amd_pinconf_group_set,
 };
 
+static void amd_gpio_irq_init(struct amd_gpio *gpio_dev)
+{
+	struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
+	unsigned long flags;
+	u32 pin_reg, mask;
+	int i;
+
+	mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3) |
+		BIT(INTERRUPT_MASK_OFF) | BIT(INTERRUPT_ENABLE_OFF) |
+		BIT(WAKE_CNTRL_OFF_S4);
+
+	for (i = 0; i < desc->npins; i++) {
+		int pin = desc->pins[i].number;
+		const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin);
+
+		if (!pd)
+			continue;
+
+		raw_spin_lock_irqsave(&gpio_dev->lock, flags);
+
+		pin_reg = readl(gpio_dev->base + i * 4);
+		pin_reg &= ~mask;
+		writel(pin_reg, gpio_dev->base + i * 4);
+
+		raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
+	}
+}
+
 #ifdef CONFIG_PM_SLEEP
 static bool amd_gpio_should_save(struct amd_gpio *gpio_dev, unsigned int pin)
 {
@@ -976,6 +1004,9 @@ static int amd_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(gpio_dev->pctrl);
 	}
 
+	/* Disable and mask interrupts */
+	amd_gpio_irq_init(gpio_dev);
+
 	girq = &gpio_dev->gc.irq;
 	girq->chip = &amd_gpio_irqchip;
 	/* This will let us handle the parent IRQ in the driver */

drivers/pinctrl/stm32/pinctrl-stm32.c

@@ -1644,8 +1644,8 @@ int __maybe_unused stm32_pinctrl_resume(struct device *dev)
 	struct stm32_pinctrl_group *g = pctl->groups;
 	int i;
 
-	for (i = g->pin; i < g->pin + pctl->ngroups; i++)
-		stm32_pinctrl_restore_gpio_regs(pctl, i);
+	for (i = 0; i < pctl->ngroups; i++, g++)
+		stm32_pinctrl_restore_gpio_regs(pctl, g->pin);
 
 	return 0;
 }