dt-bindings: soundwire: qcom: add 16-bit sample interval

The port sample interval was always 16-bit, split into low and high
bytes.  This split was unnecessary, although harmless for older devices
because all of them used only lower byte (so values < 0xff).  With
support for Soundwire controller on Qualcomm SM8550 and its devices,
both bytes will be used, thus add a new 'qcom,ports-sinterval' property
to allow 16-bit sample intervals.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230418095447.577001-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml

@@ -86,7 +86,7 @@ properties:
   qcom,ports-sinterval-low:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
-      Sample interval low of each data port.
+      Sample interval (only lowest byte) of each data port.
       Out ports followed by In ports. Used for Sample Interval calculation.
       Value of 0xff indicates that this option is not implemented
       or applicable for the respective data port.
@@ -94,6 +94,17 @@ properties:
     minItems: 3
     maxItems: 16
 
+  qcom,ports-sinterval:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description:
+      Sample interval of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xffff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
   qcom,ports-offset1:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
@@ -220,10 +231,15 @@ required:
   - '#size-cells'
   - qcom,dout-ports
   - qcom,din-ports
-  - qcom,ports-sinterval-low
   - qcom,ports-offset1
   - qcom,ports-offset2
 
+oneOf:
+  - required:
+      - qcom,ports-sinterval-low
+  - required:
+      - qcom,ports-sinterval
+
 additionalProperties: false
 
 examples: