Commit a5532606 authored by Al Viro's avatar Al Viro Committed by Linus Torvalds

[PATCH] ISA DMA Kconfig fixes - part 3

Drivers that expect ISA DMA API are marked as such in Kconfig.
Signed-off-by: default avatarAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 7fbacd52
......@@ -105,7 +105,7 @@ config ATARI_SLM
config BLK_DEV_XD
tristate "XT hard disk support"
depends on ISA
depends on ISA && ISA_DMA_API
help
Very old 8 bit hard disk controllers used in the IBM XT computer
will be supported if you say Y here.
......
......@@ -153,7 +153,7 @@ config DIGIEPCA
config ESPSERIAL
tristate "Hayes ESP serial port support"
depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP
depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP && ISA_DMA_API
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
......@@ -195,7 +195,7 @@ config ISI
config SYNCLINK
tristate "Microgate SyncLink card support"
depends on SERIAL_NONSTANDARD && PCI
depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
help
Provides support for the SyncLink ISA and PCI multiprotocol serial
adapters. These adapters support asynchronous and HDLC bit
......
......@@ -51,7 +51,7 @@ config MMC_PXA
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
depends on MMC && ISA
depends on MMC && ISA && ISA_DMA_API
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
......
......@@ -589,7 +589,7 @@ config EL2
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
depends on NET_VENDOR_3COM && ISA
depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
---help---
Information about this network (Ethernet) card can be found in
<file:Documentation/networking/3c505.txt>. If you have a card of
......@@ -630,7 +630,7 @@ config EL3
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on NET_VENDOR_3COM && (ISA || EISA)
depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y and read the Ethernet-HOWTO, available from
......@@ -708,7 +708,7 @@ config TYPHOON
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on NET_ETHERNET && ISA
depends on NET_ETHERNET && ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
......@@ -864,7 +864,7 @@ config NI52
config NI65
tristate "NI6510 support"
depends on NET_VENDOR_RACAL && ISA
depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
......@@ -1072,7 +1072,7 @@ config NE2000
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL
depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
help
The Zenith Z-Note notebook computer has a built-in network
(Ethernet) card, and this is the Linux driver for it. Note that the
......
......@@ -13,7 +13,7 @@ config DEV_APPLETALK
config LTPC
tristate "Apple/Farallon LocalTalk PC support"
depends on DEV_APPLETALK && (ISA || EISA)
depends on DEV_APPLETALK && (ISA || EISA) && ISA_DMA_API
help
This allows you to use the AppleTalk PC card to connect to LocalTalk
networks. The card is also known as the Farallon PhoneNet PC card.
......
......@@ -45,7 +45,7 @@ config BPQETHER
config DMASCC
tristate "High-speed (DMA) SCC driver for AX.25"
depends on ISA && AX25 && BROKEN_ON_SMP
depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API
---help---
This is a driver for high-speed SCC boards, i.e. those supporting
DMA on one port. You usually use those boards to connect your
......@@ -78,7 +78,7 @@ config DMASCC
config SCC
tristate "Z8530 SCC driver"
depends on ISA && AX25
depends on ISA && AX25 && ISA_DMA_API
---help---
These cards are used to connect your Linux box to an amateur radio
in order to communicate with other computers. If you want to use
......
......@@ -26,7 +26,7 @@ config WAN
# There is no way to detect a comtrol sv11 - force it modular for now.
config HOSTESS_SV11
tristate "Comtrol Hostess SV-11 support"
depends on WAN && ISA && m
depends on WAN && ISA && m && ISA_DMA_API
help
Driver for Comtrol Hostess SV-11 network card which
operates on low speed synchronous serial links at up to
......@@ -38,7 +38,7 @@ config HOSTESS_SV11
# The COSA/SRP driver has not been tested as non-modular yet.
config COSA
tristate "COSA/SRP sync serial boards support"
depends on WAN && ISA && m
depends on WAN && ISA && m && ISA_DMA_API
---help---
Driver for COSA and SRP synchronous serial boards.
......@@ -127,7 +127,7 @@ config LANMEDIA
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
depends on WAN && ISA && m
depends on WAN && ISA && m && ISA_DMA_API
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
......
......@@ -260,7 +260,7 @@ config SCSI_3W_9XXX
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI
depends on ISA && SCSI && ISA_DMA_API
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
......@@ -295,7 +295,7 @@ config SCSI_AHA152X
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
depends on ISA && SCSI
depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
......@@ -515,7 +515,7 @@ config SCSI_SATA_VITESSE
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
......@@ -571,7 +571,7 @@ config SCSI_DTC3280
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
......@@ -665,7 +665,7 @@ config SCSI_FD_MCS
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
---help---
Formerly called GDT SCSI Disk Array Controller Support.
......@@ -1416,7 +1416,7 @@ config SCSI_T128
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
depends on ISA && SCSI
depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment