Commit a580e5b9 authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge:
  powerpc: Fix define_machine so machine_is() works from modules
  powerpc/ppc: export strncasecmp
  [PATCH] powerpc: fix oops in alsa powermac driver
  [PATCH] powerpc: update {g5,iseries,pseries}_defconfigs
  [PATCH] ppc: Fix powersave code on arch/ppc
  [PATCH] powerpc/cell: remove BUILD_BUG_ON and add sys_tee to spu_syscall_table
  [PATCH] powermac: Fix i2c on keywest based chips
  [PATCH] powerpc: Lower threshold for DART enablement to 1GB
  [PATCH] powerpc: IOMMU support for honoring dma_mask
parents 93e1b7d4 d0e15bed
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc2
# Fri Feb 10 17:33:08 2006
# Linux kernel version: 2.6.17-rc1
# Wed Apr 19 13:24:37 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
......@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
......@@ -29,6 +30,7 @@ CONFIG_POWER4=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
......@@ -53,6 +55,7 @@ CONFIG_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
......@@ -67,10 +70,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
......@@ -82,7 +81,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
......@@ -91,6 +89,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
......@@ -185,7 +184,6 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -227,6 +225,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
......@@ -238,6 +237,8 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
......@@ -261,6 +262,7 @@ CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
#
......@@ -513,6 +515,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
......@@ -761,7 +764,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
......@@ -772,6 +774,7 @@ CONFIG_GEN_RTC=y
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_VIA is not set
CONFIG_AGP_UNINORTH=m
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
......@@ -813,7 +816,6 @@ CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
......@@ -832,9 +834,7 @@ CONFIG_I2C_POWERMAC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -861,10 +861,6 @@ CONFIG_I2C_POWERMAC=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -874,6 +870,7 @@ CONFIG_I2C_POWERMAC=y
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
......@@ -883,6 +880,7 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
......@@ -901,7 +899,6 @@ CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
......@@ -958,9 +955,11 @@ CONFIG_SND_SEQUENCER=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
......@@ -977,6 +976,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
......@@ -1009,6 +1009,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
......@@ -1041,6 +1042,7 @@ CONFIG_SND_USB_AUDIO=m
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
......@@ -1068,7 +1070,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
......@@ -1125,15 +1126,6 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
......@@ -1194,6 +1186,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
......@@ -1236,18 +1229,24 @@ CONFIG_USB_EZUSB=y
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# EDAC - error detection and reporting (RAS)
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
......@@ -1319,7 +1318,6 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc6
# Wed Mar 15 16:19:52 2006
# Linux kernel version: 2.6.17-rc1
# Wed Apr 19 11:46:44 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
......@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
......@@ -30,6 +31,7 @@ CONFIG_POWER4=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
......@@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
......@@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
......@@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
......@@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
......@@ -165,7 +164,6 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -207,6 +205,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
......@@ -218,6 +217,8 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
......@@ -236,11 +237,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
......@@ -262,20 +266,19 @@ CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
......@@ -479,6 +482,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
......@@ -702,7 +706,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
......@@ -750,10 +753,6 @@ CONFIG_MAX_RAW_DEVS=256
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -779,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
......@@ -795,6 +795,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# InfiniBand support
#
......@@ -804,6 +809,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
......@@ -878,7 +888,6 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc2
# Fri Feb 10 17:33:32 2006
# Linux kernel version: 2.6.17-rc1
# Wed Apr 19 11:48:00 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
......@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
......@@ -30,6 +31,7 @@ CONFIG_POWER4=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=128
......@@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
......@@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
......@@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
......@@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
......@@ -188,7 +187,6 @@ CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -235,6 +233,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
......@@ -246,6 +245,8 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
......@@ -272,6 +273,7 @@ CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
#
......@@ -519,6 +521,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
......@@ -750,6 +753,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
......@@ -767,7 +771,9 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_RTAS is not set
CONFIG_HVCS=m
#
......@@ -779,7 +785,6 @@ CONFIG_HVCS=m
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
......@@ -830,7 +835,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
......@@ -849,9 +853,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -878,10 +880,6 @@ CONFIG_I2C_ALGOBIT=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -891,6 +889,7 @@ CONFIG_I2C_ALGOBIT=y
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
......@@ -900,6 +899,7 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
......@@ -919,7 +919,6 @@ CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
......@@ -968,6 +967,7 @@ CONFIG_LCD_DEVICE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
......@@ -1047,15 +1047,6 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
......@@ -1108,6 +1099,11 @@ CONFIG_USB_MON=y
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# InfiniBand support
#
......@@ -1121,12 +1117,13 @@ CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# EDAC - error detection and reporting (RAS)
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
......@@ -1202,7 +1199,6 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
......
......@@ -61,6 +61,7 @@ __setup("iommu=", setup_iommu);
static unsigned long iommu_range_alloc(struct iommu_table *tbl,
unsigned long npages,
unsigned long *handle,
unsigned long mask,
unsigned int align_order)
{
unsigned long n, end, i, start;
......@@ -97,9 +98,21 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl,
*/
if (start >= limit)
start = largealloc ? tbl->it_largehint : tbl->it_hint;
again:
if (limit + tbl->it_offset > mask) {
limit = mask - tbl->it_offset + 1;
/* If we're constrained on address range, first try
* at the masked hint to avoid O(n) search complexity,
* but on second pass, start at 0.
*/
if ((start & mask) >= limit || pass > 0)
start = 0;
else
start &= mask;
}
n = find_next_zero_bit(tbl->it_map, limit, start);
/* Align allocation */
......@@ -150,14 +163,14 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl,
static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page,
unsigned int npages, enum dma_data_direction direction,
unsigned int align_order)
unsigned long mask, unsigned int align_order)
{
unsigned long entry, flags;
dma_addr_t ret = DMA_ERROR_CODE;
spin_lock_irqsave(&(tbl->it_lock), flags);
entry = iommu_range_alloc(tbl, npages, NULL, align_order);
entry = iommu_range_alloc(tbl, npages, NULL, mask, align_order);
if (unlikely(entry == DMA_ERROR_CODE)) {
spin_unlock_irqrestore(&(tbl->it_lock), flags);
......@@ -236,7 +249,7 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
struct scatterlist *sglist, int nelems,
enum dma_data_direction direction)
unsigned long mask, enum dma_data_direction direction)
{
dma_addr_t dma_next = 0, dma_addr;
unsigned long flags;
......@@ -274,7 +287,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
vaddr = (unsigned long)page_address(s->page) + s->offset;
npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK);
npages >>= PAGE_SHIFT;
entry = iommu_range_alloc(tbl, npages, &handle, 0);
entry = iommu_range_alloc(tbl, npages, &handle, mask >> PAGE_SHIFT, 0);
DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen);
......@@ -479,7 +492,8 @@ void iommu_free_table(struct device_node *dn)
* byte within the page as vaddr.
*/
dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
size_t size, enum dma_data_direction direction)
size_t size, unsigned long mask,
enum dma_data_direction direction)
{
dma_addr_t dma_handle = DMA_ERROR_CODE;
unsigned long uaddr;
......@@ -492,7 +506,8 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
npages >>= PAGE_SHIFT;
if (tbl) {
dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0);
dma_handle = iommu_alloc(tbl, vaddr, npages, direction,
mask >> PAGE_SHIFT, 0);
if (dma_handle == DMA_ERROR_CODE) {
if (printk_ratelimit()) {
printk(KERN_INFO "iommu_alloc failed, "
......@@ -521,7 +536,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
* to the dma address (mapping) of the first page.
*/
void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
dma_addr_t *dma_handle, unsigned long mask, gfp_t flag)
{
void *ret = NULL;
dma_addr_t mapping;
......@@ -551,7 +566,8 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
memset(ret, 0, size);
/* Set up tces to cover the allocated range */
mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order);
mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL,
mask >> PAGE_SHIFT, order);
if (mapping == DMA_ERROR_CODE) {
free_pages((unsigned long)ret, order);
ret = NULL;
......
......@@ -59,6 +59,25 @@ static inline struct iommu_table *devnode_table(struct device *dev)
}
static inline unsigned long device_to_mask(struct device *hwdev)
{
struct pci_dev *pdev;
if (!hwdev) {
pdev = ppc64_isabridge_dev;
if (!pdev) /* This is the best guess we can do */
return 0xfffffffful;
} else
pdev = to_pci_dev(hwdev);
if (pdev->dma_mask)
return pdev->dma_mask;
/* Assume devices without mask can take 32 bit addresses */
return 0xfffffffful;
}
/* Allocates a contiguous real buffer and creates mappings over it.
* Returns the virtual address of the buffer and sets dma_handle
* to the dma address (mapping) of the first page.
......@@ -67,7 +86,7 @@ static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
flag);
device_to_mask(hwdev), flag);
}
static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
......@@ -85,7 +104,8 @@ static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
size_t size, enum dma_data_direction direction)
{
return iommu_map_single(devnode_table(hwdev), vaddr, size, direction);
return iommu_map_single(devnode_table(hwdev), vaddr, size,
device_to_mask(hwdev), direction);
}
......@@ -100,7 +120,7 @@ static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
return iommu_map_sg(pdev, devnode_table(pdev), sglist,
nelems, direction);
nelems, device_to_mask(pdev), direction);
}
static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
......@@ -112,7 +132,19 @@ static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
/* We support DMA to/from any memory page via the iommu */
static int pci_iommu_dma_supported(struct device *dev, u64 mask)
{
return 1;
struct iommu_table *tbl = devnode_table(dev);
if (!tbl || tbl->it_offset > mask) {
printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n");
if (tbl)
printk(KERN_INFO "mask: 0x%08lx, table offset: 0x%08lx\n",
mask, tbl->it_offset);
else
printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
mask);
return 0;
} else
return 1;
}
void pci_iommu_init(void)
......
......@@ -81,6 +81,7 @@ EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strcasecmp);
EXPORT_SYMBOL(strncasecmp);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
......
......@@ -62,7 +62,7 @@ static int __initdata dt_root_addr_cells;
static int __initdata dt_root_size_cells;
#ifdef CONFIG_PPC64
static int __initdata iommu_is_off;
int __initdata iommu_is_off;
int __initdata iommu_force_on;
unsigned long tce_alloc_start, tce_alloc_end;
#endif
......
......@@ -324,3 +324,8 @@ COMPAT_SYS(ppoll)
SYSCALL(unshare)
SYSCALL(splice)
SYSCALL(tee)
/*
* please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
* as well when appropriate.
*/
......@@ -202,7 +202,7 @@ static dma_addr_t vio_map_single(struct device *dev, void *vaddr,
size_t size, enum dma_data_direction direction)
{
return iommu_map_single(to_vio_dev(dev)->iommu_table, vaddr, size,
direction);
~0ul, direction);
}
static void vio_unmap_single(struct device *dev, dma_addr_t dma_handle,
......@@ -216,7 +216,7 @@ static int vio_map_sg(struct device *dev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
return iommu_map_sg(dev, to_vio_dev(dev)->iommu_table, sglist,
nelems, direction);
nelems, ~0ul, direction);
}
static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist,
......@@ -229,7 +229,7 @@ static void *vio_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
dma_handle, flag);
dma_handle, ~0ul, flag);
}
static void vio_free_coherent(struct device *dev, size_t size,
......
......@@ -317,17 +317,16 @@ void *spu_syscall_table[] = {
[__NR_ppoll] sys_ni_syscall, /* sys_ppoll */
[__NR_unshare] sys_unshare,
[__NR_splice] sys_splice,
[__NR_tee] sys_tee,
};
long spu_sys_callback(struct spu_syscall_block *s)
{
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls);
syscall = spu_syscall_table[s->nr_ret];
if (s->nr_ret >= __NR_syscalls) {
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
return -ENOSYS;
}
......
......@@ -231,6 +231,14 @@ static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
return isr;
}
static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result)
{
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
host->state = state_stop;
host->result = result;
}
static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
{
u8 ack;
......@@ -246,42 +254,36 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
}
if (isr == 0) {
printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
" on keywest !\n");
if (host->state != state_stop) {
DBG_LOW("KW: Timeout !\n");
host->result = -EIO;
goto stop;
}
if (host->state == state_stop) {
ack = kw_read_reg(reg_status);
if (ack & KW_I2C_STAT_BUSY)
kw_write_reg(reg_status, 0);
host->state = state_idle;
kw_write_reg(reg_ier, 0x00);
if (!host->polled)
complete(&host->complete);
kw_i2c_do_stop(host, -EIO);
return;
}
ack = kw_read_reg(reg_status);
if (ack & KW_I2C_STAT_BUSY)
kw_write_reg(reg_status, 0);
host->state = state_idle;
kw_write_reg(reg_ier, 0x00);
if (!host->polled)
complete(&host->complete);
return;
}
if (isr & KW_I2C_IRQ_ADDR) {
ack = kw_read_reg(reg_status);
if (host->state != state_addr) {
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
WRONG_STATE("KW_I2C_IRQ_ADDR");
host->result = -EIO;
goto stop;
kw_i2c_do_stop(host, -EIO);
}
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
host->result = -ENODEV;
DBG_LOW("KW: NAK on address\n");
host->result = -ENXIO;
host->state = state_stop;
return;
DBG_LOW("KW: NAK on address\n");
} else {
if (host->len == 0) {
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
goto stop;
}
if (host->rw) {
if (host->len == 0)
kw_i2c_do_stop(host, 0);
else if (host->rw) {
host->state = state_read;
if (host->len > 1)
kw_write_reg(reg_control,
......@@ -308,25 +310,19 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
ack = kw_read_reg(reg_status);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
DBG_LOW("KW: nack on data write\n");
host->result = -EIO;
goto stop;
host->result = -EFBIG;
host->state = state_stop;
} else if (host->len) {
kw_write_reg(reg_data, *(host->data++));
host->len--;
} else {
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
host->state = state_stop;
host->result = 0;
}
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
} else
kw_i2c_do_stop(host, 0);
} else {
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
WRONG_STATE("KW_I2C_IRQ_DATA");
if (host->state != state_stop) {
host->result = -EIO;
goto stop;
}
if (host->state != state_stop)
kw_i2c_do_stop(host, -EIO);
}
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
}
if (isr & KW_I2C_IRQ_STOP) {
......@@ -340,14 +336,10 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
complete(&host->complete);
}
/* Below should only happen in manual mode which we don't use ... */
if (isr & KW_I2C_IRQ_START)
kw_write_reg(reg_isr, KW_I2C_IRQ_START);
return;
stop:
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
host->state = state_stop;
return;
}
/* Interrupt handler */
......@@ -544,11 +536,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
return NULL;
}
/* Make sure IRA is disabled */
/* Make sure IRQ is disabled */
kw_write_reg(reg_ier, 0);
/* Request chip interrupt */
if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host))
if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
host->irq = NO_IRQ;
printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
......
......@@ -49,6 +49,7 @@
#include "dart.h"
extern int iommu_is_off;
extern int iommu_force_on;
/* Physical base address and size of the DART table */
......@@ -329,10 +330,17 @@ void iommu_init_early_dart(void)
void __init alloc_dart_table(void)
{
/* Only reserve DART space if machine has more than 2GB of RAM
/* Only reserve DART space if machine has more than 1GB of RAM
* or if requested with iommu=on on cmdline.
*
* 1GB of RAM is picked as limit because some default devices
* (i.e. Airport Extreme) have 30 bit address range limits.
*/
if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on)
if (iommu_is_off)
return;
if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
return;
/* 512 pages (2MB) is max DART tablesize. */
......
......@@ -134,6 +134,7 @@ main(void)
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
......
......@@ -128,29 +128,26 @@ transfer_to_handler:
stw r12,4(r11)
#endif
b 3f
2: /* if from kernel, check interrupted DOZE/NAP mode and
* check for stack overflow
*/
lwz r9,THREAD_INFO-THREAD(r12)
cmplw r1,r9 /* if r1 <= current->thread_info */
ble- stack_ovf /* then the kernel stack overflowed */
5:
#ifdef CONFIG_6xx
mfspr r11,SPRN_HID0
mtcr r11
BEGIN_FTR_SECTION
bt- 8,4f /* Check DOZE */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
bt- 9,4f /* Check NAP */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
tophys(r9,r9) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
bt- 31-TLF_NAPPING,4f
#endif /* CONFIG_6xx */
.globl transfer_to_handler_cont
transfer_to_handler_cont:
lwz r11,THREAD_INFO-THREAD(r12)
cmplw r1,r11 /* if r1 <= current->thread_info */
ble- stack_ovf /* then the kernel stack overflowed */
3:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
FIX_SRR1(r10,r12)
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
......@@ -158,7 +155,9 @@ transfer_to_handler_cont:
RFI /* jump to handler, enable MMU */
#ifdef CONFIG_6xx
4: b power_save_6xx_restore
4: rlwinm r12,r12,0,~_TLF_NAPPING
stw r12,TI_LOCAL_FLAGS(r9)
b power_save_6xx_restore
#endif
/*
......@@ -167,10 +166,10 @@ transfer_to_handler_cont:
*/
stack_ovf:
/* sometimes we use a statically-allocated stack, which is OK. */
lis r11,_end@h
ori r11,r11,_end@l
cmplw r1,r11
ble 3b /* r1 <= &_end is OK */
lis r12,_end@h
ori r12,r12,_end@l
cmplw r1,r12
ble 5b /* r1 <= &_end is OK */
SAVE_NVGPRS(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
lis r1,init_thread_union@ha
......
......@@ -94,6 +94,7 @@ EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strcasecmp);
EXPORT_SYMBOL(strncasecmp);
EXPORT_SYMBOL(__div64_32);
EXPORT_SYMBOL(csum_partial);
......
......@@ -627,8 +627,8 @@ thermostat_init(void)
if(therm_type == ADT7460)
device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
#ifndef CONFIG_I2C_KEYWEST
request_module("i2c-keywest");
#ifndef CONFIG_I2C_POWERMAC
request_module("i2c-powermac");
#endif
return i2c_add_driver(&thermostat_driver);
......
......@@ -70,17 +70,18 @@ extern void iommu_free_table(struct device_node *dn);
extern struct iommu_table *iommu_init_table(struct iommu_table * tbl);
extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
struct scatterlist *sglist, int nelems,
struct scatterlist *sglist, int nelems, unsigned long mask,
enum dma_data_direction direction);
extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction);
extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
dma_addr_t *dma_handle, gfp_t flag);
dma_addr_t *dma_handle, unsigned long mask, gfp_t flag);
extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
void *vaddr, dma_addr_t dma_handle);
extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
size_t size, enum dma_data_direction direction);
size_t size, unsigned long mask,
enum dma_data_direction direction);
extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction);
......
......@@ -253,7 +253,11 @@ extern struct machdep_calls *machine_id;
#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
#define define_machine(name) struct machdep_calls mach_##name __machine_desc =
#define define_machine(name) \
extern struct machdep_calls mach_##name; \
EXPORT_SYMBOL(mach_##name); \
struct machdep_calls mach_##name __machine_desc =
#define machine_is(name) \
({ \
extern struct machdep_calls mach_##name \
......
......@@ -195,8 +195,8 @@ tas_init(int driver_id, const char *driver_name)
printk(KERN_INFO "tas driver [%s])\n", driver_name);
#ifndef CONFIG_I2C_KEYWEST
request_module("i2c-keywest");
#ifndef CONFIG_I2C_POWERMAC
request_module("i2c-powermac");
#endif
tas_node = find_devices("deq");
if (tas_node == NULL)
......
......@@ -255,7 +255,7 @@ int __init snd_pmac_daca_init(struct snd_pmac *chip)
#ifdef CONFIG_KMOD
if (current->fs->root)
request_module("i2c-keywest");
request_module("i2c-powermac");
#endif /* CONFIG_KMOD */
mix = kmalloc(sizeof(*mix), GFP_KERNEL);
......
......@@ -1313,7 +1313,7 @@ int __init snd_pmac_tumbler_init(struct snd_pmac *chip)
#ifdef CONFIG_KMOD
if (current->fs->root)
request_module("i2c-keywest");
request_module("i2c-powermac");
#endif /* CONFIG_KMOD */
mix = kmalloc(sizeof(*mix), GFP_KERNEL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment