Skip to content

L
linux
Commit a60bb261 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'sti-dt-for-v4.9-2' of... 

Merge tag 'sti-dt-for-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt

Pull "STi dts update" from Patrice Chotard:

Update gpio-cells and gpio specifier for STiH415/416
Add PWM capture support for STiH416 and STiH407 family
Add USB3 support for B2260
Add HVA support for STiH410
Add clk_ignore_unused in bootargs of B2260
Add Flexible Direct Memory Access (FDMA) support for STiH407 family
Add internal audio codec IP spport for STiH407 family
Add uniperif player/reader IP blocks for STiH407 family

* tag 'sti-dt-for-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: (22 commits)
  ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card
  ARM: STi: DT: STiH407: Add uniperif reader dt nodes
  ARM: STi: DT: STiH407: Add uniperif player dt nodes
  ARM: STi: DT: STiH407: Add sti-sasg-codec dt node
  ARM: DT: STiH407: Add spdif_out pinctrl config
  ARM: DT: STiH407: Add i2s_in pinctrl configuration
  ARM: DT: STiH407: Add i2s_out pinctrl configuration
  ARM: STi: DT: STiH407: Add FDMA driver dt nodes.
  ARM: dts: STiH410: Add hva dt nodes
  ARM: dts: STiH410-b2260: add clk_ignore_unused in bootargs
  ARM: dts: STiH410-b2260: add USB3 node
  ARM: dts: STiH416: Define the number of PWM Capture channels
  ARM: dts: STiH416: Define PWM Capture clock
  ARM: dts: STiH416: Declare PWM Capture data lines via Pinctrl
  ARM: dts: STiH416: Supply PWM Capture IRQs
  ARM: dts: STiH407: Declare PWM Capture data lines via Pinctrl
  ARM: dts: STiH407: Supply PWM Capture IRQ
  ARM: dts: STiH416-b2020e: update gpio specifier
  ARM: dts: STiH41x-b2000: update gpio specifier
  ARM: dts: STiHxxx-b2120: update gpio specifier
  ...
parents e4077485 443fd7c9
Hide whitespace changes
Inline Side-by-side
Showing with 362 additions and 69 deletions
arch/arm/boot/dts/stih407-family.dtsi
View file @ a60bb261
...@@ -670,6 +670,7 @@ pwm0: pwm@9810000 { ...@@ -670,6 +670,7 @@ pwm0: pwm@9810000 {
compatible = "st,sti-pwm"; compatible = "st,sti-pwm";
#pwm-cells = <2>; #pwm-cells = <2>;
reg = <0x9810000 0x68>; reg = <0x9810000 0x68>;
interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default>; pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
clock-names = "pwm"; clock-names = "pwm";
...@@ -824,5 +825,172 @@ st231_dmu: remote-processor { ...@@ -824,5 +825,172 @@ st231_dmu: remote-processor {
clock-frequency = <600000000>; clock-frequency = <600000000>;
st,syscfg = <&syscfg_core 0x224>; st,syscfg = <&syscfg_core 0x224>;
}; };
/* fdma audio */
fdma0: dma-controller@8e20000 {
compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
reg = <0x8e20000 0x8000>,
<0x8e30000 0x3000>,
<0x8e37000 0x1000>,
<0x8e38000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
dma-channels = <16>;
#dma-cells = <3>;
};
/* fdma app */
fdma1: dma-controller@8e40000 {
compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
reg = <0x8e40000 0x8000>,
<0x8e50000 0x3000>,
<0x8e57000 0x1000>,
<0x8e58000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
dma-channels = <16>;
#dma-cells = <3>;
};
/* fdma free running */
fdma2: dma-controller@8e60000 {
compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
reg = <0x8e60000 0x8000>,
<0x8e70000 0x3000>,
<0x8e77000 0x1000>,
<0x8e78000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
dma-channels = <16>;
#dma-cells = <3>;
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
};
sti_sasg_codec: sti-sasg-codec {
compatible = "st,stih407-sas-codec";
#sound-dai-cells = <1>;
status = "disabled";
st,syscfg = <&syscfg_core>;
};
sti_uni_player0: sti-uni-player@8d80000 {
compatible = "st,sti-uni-player";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
assigned-clock-rates = <50000000>;
reg = <0x8d80000 0x158>;
interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
dmas = <&fdma0 2 0 1>;
dai-name = "Uni Player #0 (HDMI)";
dma-names = "tx";
st,uniperiph-id = <0>;
st,version = <5>;
st,mode = "HDMI";
status = "disabled";
};
sti_uni_player1: sti-uni-player@8d81000 {
compatible = "st,sti-uni-player";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
assigned-clock-rates = <50000000>;
reg = <0x8d81000 0x158>;
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
dmas = <&fdma0 3 0 1>;
dai-name = "Uni Player #1 (PIO)";
dma-names = "tx";
st,uniperiph-id = <1>;
st,version = <5>;
st,mode = "PCM";
status = "disabled";
};
sti_uni_player2: sti-uni-player@8d82000 {
compatible = "st,sti-uni-player";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
assigned-clock-rates = <50000000>;
reg = <0x8d82000 0x158>;
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
dmas = <&fdma0 4 0 1>;
dai-name = "Uni Player #1 (DAC)";
dma-names = "tx";
st,uniperiph-id = <2>;
st,version = <5>;
st,mode = "PCM";
status = "disabled";
};
sti_uni_player3: sti-uni-player@8d85000 {
compatible = "st,sti-uni-player";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
assigned-clock-rates = <50000000>;
reg = <0x8d85000 0x158>;
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
dmas = <&fdma0 7 0 1>;
dma-names = "tx";
dai-name = "Uni Player #1 (PIO)";
st,uniperiph-id = <3>;
st,version = <5>;
st,mode = "SPDIF";
status = "disabled";
};
sti_uni_reader0: sti-uni-reader@8d83000 {
compatible = "st,sti-uni-reader";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d83000 0x158>;
interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
dmas = <&fdma0 5 0 1>;
dma-names = "rx";
dai-name = "Uni Reader #0 (PCM IN)";
st,version = <3>;
status = "disabled";
};
sti_uni_reader1: sti-uni-reader@8d84000 {
compatible = "st,sti-uni-reader";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d84000 0x158>;
interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
dmas = <&fdma0 6 0 1>;
dma-names = "rx";
dai-name = "Uni Reader #1 (HDMI RX)";
st,version = <3>;
status = "disabled";
};
}; };
}; };
arch/arm/boot/dts/stih407-pinctrl.dtsi
View file @ a60bb261
...@@ -296,10 +296,12 @@ pwm1 { ...@@ -296,10 +296,12 @@ pwm1 {
pinctrl_pwm1_chan0_default: pwm1-0-default { pinctrl_pwm1_chan0_default: pwm1-0-default {
st,pins { st,pins {
pwm-out = <&pio3 0 ALT1 OUT>; pwm-out = <&pio3 0 ALT1 OUT>;
pwm-capturein = <&pio3 2 ALT1 IN>;
}; };
}; };
pinctrl_pwm1_chan1_default: pwm1-1-default { pinctrl_pwm1_chan1_default: pwm1-1-default {
st,pins { st,pins {
pwm-capturein = <&pio4 3 ALT1 IN>;
pwm-out = <&pio4 4 ALT1 OUT>; pwm-out = <&pio4 4 ALT1 OUT>;
}; };
}; };
...@@ -1044,6 +1046,7 @@ st,pins { ...@@ -1044,6 +1046,7 @@ st,pins {
pwm0 { pwm0 {
pinctrl_pwm0_chan0_default: pwm0-0-default { pinctrl_pwm0_chan0_default: pwm0-0-default {
st,pins { st,pins {
pwm-capturein = <&pio31 0 ALT1 IN>;
pwm-out = <&pio31 1 ALT1 OUT>; pwm-out = <&pio31 1 ALT1 OUT>;
}; };
}; };
...@@ -1081,6 +1084,61 @@ st,pins { ...@@ -1081,6 +1084,61 @@ st,pins {
}; };
}; };
i2s_out {
pinctrl_i2s_8ch_out: i2s_8ch_out{
st,pins {
mclk = <&pio33 5 ALT1 OUT>;
lrclk = <&pio33 7 ALT1 OUT>;
sclk = <&pio33 6 ALT1 OUT>;
data0 = <&pio33 4 ALT1 OUT>;
data1 = <&pio34 0 ALT1 OUT>;
data2 = <&pio34 1 ALT1 OUT>;
data3 = <&pio34 2 ALT1 OUT>;
};
};
pinctrl_i2s_2ch_out: i2s_2ch_out{
st,pins {
mclk = <&pio33 5 ALT1 OUT>;
lrclk = <&pio33 7 ALT1 OUT>;
sclk = <&pio33 6 ALT1 OUT>;
data0 = <&pio33 4 ALT1 OUT>;
};
};
};
i2s_in {
pinctrl_i2s_8ch_in: i2s_8ch_in{
st,pins {
mclk = <&pio32 5 ALT1 IN>;
lrclk = <&pio32 7 ALT1 IN>;
sclk = <&pio32 6 ALT1 IN>;
data0 = <&pio32 4 ALT1 IN>;
data1 = <&pio33 0 ALT1 IN>;
data2 = <&pio33 1 ALT1 IN>;
data3 = <&pio33 2 ALT1 IN>;
data4 = <&pio33 3 ALT1 IN>;
};
};
pinctrl_i2s_2ch_in: i2s_2ch_in{
st,pins {
mclk = <&pio32 5 ALT1 IN>;
lrclk = <&pio32 7 ALT1 IN>;
sclk = <&pio32 6 ALT1 IN>;
data0 = <&pio32 4 ALT1 IN>;
};
};
};
spdif_out {
pinctrl_spdif_out: spdif_out{
st,pins {
spdif_out = <&pio34 7 ALT1 OUT>;
};
};
};
serial3 { serial3 {
pinctrl_serial3: serial3-0 { pinctrl_serial3: serial3-0 {
st,pins { st,pins {
......
arch/arm/boot/dts/stih410-b2260.dts
View file @ a60bb261
...@@ -15,7 +15,7 @@ / { ...@@ -15,7 +15,7 @@ / {
compatible = "st,stih410-b2260", "st,stih410"; compatible = "st,stih410-b2260", "st,stih410";
chosen { chosen {
bootargs = "console=ttyAS1,115200"; bootargs = "console=ttyAS1,115200 clk_ignore_unused";
linux,stdout-path = &uart1; linux,stdout-path = &uart1;
}; };
...@@ -147,6 +147,10 @@ ehci1: usb@9a83e00 { ...@@ -147,6 +147,10 @@ ehci1: usb@9a83e00 {
status = "okay"; status = "okay";
}; };
st_dwc3: dwc3@8f94000 {
status = "okay";
};
ethernet0: dwmac@9630000 { ethernet0: dwmac@9630000 {
phy-mode = "rgmii"; phy-mode = "rgmii";
pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>; pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
......
arch/arm/boot/dts/stih410.dtsi
View file @ a60bb261
...@@ -228,6 +228,16 @@ bdisp0:bdisp@9f10000 { ...@@ -228,6 +228,16 @@ bdisp0:bdisp@9f10000 {
clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
}; };
hva@8c85000 {
compatible = "st,st-hva";
reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
reg-names = "hva_registers", "hva_esram";
interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
<GIC_SPI 59 IRQ_TYPE_NONE>;
clock-names = "clk_hva";
clocks = <&clk_s_c0_flexgen CLK_HVA>;
};
thermal@91a0000 { thermal@91a0000 {
compatible = "st,stih407-thermal"; compatible = "st,stih407-thermal";
reg = <0x91a0000 0x28>; reg = <0x91a0000 0x28>;
......
arch/arm/boot/dts/stih415-pinctrl.dtsi
View file @ a60bb261
...@@ -54,7 +54,7 @@ pin-controller-sbc { ...@@ -54,7 +54,7 @@ pin-controller-sbc {
pio0: gpio@fe610000 { pio0: gpio@fe610000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -62,7 +62,7 @@ pio0: gpio@fe610000 { ...@@ -62,7 +62,7 @@ pio0: gpio@fe610000 {
}; };
pio1: gpio@fe611000 { pio1: gpio@fe611000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -70,7 +70,7 @@ pio1: gpio@fe611000 { ...@@ -70,7 +70,7 @@ pio1: gpio@fe611000 {
}; };
pio2: gpio@fe612000 { pio2: gpio@fe612000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -78,7 +78,7 @@ pio2: gpio@fe612000 { ...@@ -78,7 +78,7 @@ pio2: gpio@fe612000 {
}; };
pio3: gpio@fe613000 { pio3: gpio@fe613000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -86,7 +86,7 @@ pio3: gpio@fe613000 { ...@@ -86,7 +86,7 @@ pio3: gpio@fe613000 {
}; };
pio4: gpio@fe614000 { pio4: gpio@fe614000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
...@@ -208,7 +208,7 @@ pin-controller-front { ...@@ -208,7 +208,7 @@ pin-controller-front {
pio5: gpio@fee00000 { pio5: gpio@fee00000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -216,7 +216,7 @@ pio5: gpio@fee00000 { ...@@ -216,7 +216,7 @@ pio5: gpio@fee00000 {
}; };
pio6: gpio@fee01000 { pio6: gpio@fee01000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -224,7 +224,7 @@ pio6: gpio@fee01000 { ...@@ -224,7 +224,7 @@ pio6: gpio@fee01000 {
}; };
pio7: gpio@fee02000 { pio7: gpio@fee02000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -232,7 +232,7 @@ pio7: gpio@fee02000 { ...@@ -232,7 +232,7 @@ pio7: gpio@fee02000 {
}; };
pio8: gpio@fee03000 { pio8: gpio@fee03000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -240,7 +240,7 @@ pio8: gpio@fee03000 { ...@@ -240,7 +240,7 @@ pio8: gpio@fee03000 {
}; };
pio9: gpio@fee04000 { pio9: gpio@fee04000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
...@@ -248,7 +248,7 @@ pio9: gpio@fee04000 { ...@@ -248,7 +248,7 @@ pio9: gpio@fee04000 {
}; };
pio10: gpio@fee05000 { pio10: gpio@fee05000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x5000 0x100>; reg = <0x5000 0x100>;
...@@ -256,7 +256,7 @@ pio10: gpio@fee05000 { ...@@ -256,7 +256,7 @@ pio10: gpio@fee05000 {
}; };
pio11: gpio@fee06000 { pio11: gpio@fee06000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x6000 0x100>; reg = <0x6000 0x100>;
...@@ -264,7 +264,7 @@ pio11: gpio@fee06000 { ...@@ -264,7 +264,7 @@ pio11: gpio@fee06000 {
}; };
pio12: gpio@fee07000 { pio12: gpio@fee07000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x7000 0x100>; reg = <0x7000 0x100>;
...@@ -303,7 +303,7 @@ pin-controller-rear { ...@@ -303,7 +303,7 @@ pin-controller-rear {
pio13: gpio@fe820000 { pio13: gpio@fe820000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -311,7 +311,7 @@ pio13: gpio@fe820000 { ...@@ -311,7 +311,7 @@ pio13: gpio@fe820000 {
}; };
pio14: gpio@fe821000 { pio14: gpio@fe821000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -319,7 +319,7 @@ pio14: gpio@fe821000 { ...@@ -319,7 +319,7 @@ pio14: gpio@fe821000 {
}; };
pio15: gpio@fe822000 { pio15: gpio@fe822000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -327,7 +327,7 @@ pio15: gpio@fe822000 { ...@@ -327,7 +327,7 @@ pio15: gpio@fe822000 {
}; };
pio16: gpio@fe823000 { pio16: gpio@fe823000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -335,7 +335,7 @@ pio16: gpio@fe823000 { ...@@ -335,7 +335,7 @@ pio16: gpio@fe823000 {
}; };
pio17: gpio@fe824000 { pio17: gpio@fe824000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
...@@ -343,7 +343,7 @@ pio17: gpio@fe824000 { ...@@ -343,7 +343,7 @@ pio17: gpio@fe824000 {
}; };
pio18: gpio@fe825000 { pio18: gpio@fe825000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x5000 0x100>; reg = <0x5000 0x100>;
...@@ -465,7 +465,7 @@ pin-controller-left { ...@@ -465,7 +465,7 @@ pin-controller-left {
pio100: gpio@fd6b0000 { pio100: gpio@fd6b0000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -473,7 +473,7 @@ pio100: gpio@fd6b0000 { ...@@ -473,7 +473,7 @@ pio100: gpio@fd6b0000 {
}; };
pio101: gpio@fd6b1000 { pio101: gpio@fd6b1000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -481,7 +481,7 @@ pio101: gpio@fd6b1000 { ...@@ -481,7 +481,7 @@ pio101: gpio@fd6b1000 {
}; };
pio102: gpio@fd6b2000 { pio102: gpio@fd6b2000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -502,7 +502,7 @@ pin-controller-right { ...@@ -502,7 +502,7 @@ pin-controller-right {
pio103: gpio@fd330000 { pio103: gpio@fd330000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -510,7 +510,7 @@ pio103: gpio@fd330000 { ...@@ -510,7 +510,7 @@ pio103: gpio@fd330000 {
}; };
pio104: gpio@fd331000 { pio104: gpio@fd331000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -518,7 +518,7 @@ pio104: gpio@fd331000 { ...@@ -518,7 +518,7 @@ pio104: gpio@fd331000 {
}; };
pio105: gpio@fd332000 { pio105: gpio@fd332000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -526,7 +526,7 @@ pio105: gpio@fd332000 { ...@@ -526,7 +526,7 @@ pio105: gpio@fd332000 {
}; };
pio106: gpio@fd333000 { pio106: gpio@fd333000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -534,7 +534,7 @@ pio106: gpio@fd333000 { ...@@ -534,7 +534,7 @@ pio106: gpio@fd333000 {
}; };
pio107: gpio@fd334000 { pio107: gpio@fd334000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
......
arch/arm/boot/dts/stih416-b2020e.dts
View file @ a60bb261
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
/dts-v1/; /dts-v1/;
#include "stih416.dtsi" #include "stih416.dtsi"
#include "stih41x-b2020.dtsi" #include "stih41x-b2020.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "STiH416 B2020 REV-E"; model = "STiH416 B2020 REV-E";
compatible = "st,stih416-b2020", "st,stih416"; compatible = "st,stih416-b2020", "st,stih416";
...@@ -17,13 +18,12 @@ soc { ...@@ -17,13 +18,12 @@ soc {
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
red { red {
#gpio-cells = <1>;
label = "Front Panel LED"; label = "Front Panel LED";
gpios = <&pio4 1>; gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
green { green {
gpios = <&pio1 3>; gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off"; default-state = "off";
}; };
}; };
......
arch/arm/boot/dts/stih416-pinctrl.dtsi
View file @ a60bb261
...@@ -58,7 +58,7 @@ pin-controller-sbc { ...@@ -58,7 +58,7 @@ pin-controller-sbc {
pio0: gpio@fe610000 { pio0: gpio@fe610000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -66,7 +66,7 @@ pio0: gpio@fe610000 { ...@@ -66,7 +66,7 @@ pio0: gpio@fe610000 {
}; };
pio1: gpio@fe611000 { pio1: gpio@fe611000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -74,7 +74,7 @@ pio1: gpio@fe611000 { ...@@ -74,7 +74,7 @@ pio1: gpio@fe611000 {
}; };
pio2: gpio@fe612000 { pio2: gpio@fe612000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -82,7 +82,7 @@ pio2: gpio@fe612000 { ...@@ -82,7 +82,7 @@ pio2: gpio@fe612000 {
}; };
pio3: gpio@fe613000 { pio3: gpio@fe613000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -90,7 +90,7 @@ pio3: gpio@fe613000 { ...@@ -90,7 +90,7 @@ pio3: gpio@fe613000 {
}; };
pio4: gpio@fe614000 { pio4: gpio@fe614000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
...@@ -98,7 +98,7 @@ pio4: gpio@fe614000 { ...@@ -98,7 +98,7 @@ pio4: gpio@fe614000 {
}; };
pio40: gpio@fe615000 { pio40: gpio@fe615000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x5000 0x100>; reg = <0x5000 0x100>;
...@@ -221,11 +221,14 @@ pwm1 { ...@@ -221,11 +221,14 @@ pwm1 {
pinctrl_pwm1_chan0_default: pwm1-0-default { pinctrl_pwm1_chan0_default: pwm1-0-default {
st,pins { st,pins {
pwm-out = <&pio3 0 ALT1 OUT>; pwm-out = <&pio3 0 ALT1 OUT>;
pwm-capturein = <&pio3 2 ALT1 IN>;
}; };
}; };
pinctrl_pwm1_chan1_default: pwm1-1-default { pinctrl_pwm1_chan1_default: pwm1-1-default {
st,pins { st,pins {
pwm-out = <&pio4 4 ALT1 OUT>; pwm-out = <&pio4 4 ALT1 OUT>;
pwm-capturein = <&pio4 3 ALT1 IN>;
}; };
}; };
pinctrl_pwm1_chan2_default: pwm1-2-default { pinctrl_pwm1_chan2_default: pwm1-2-default {
...@@ -254,7 +257,7 @@ pin-controller-front { ...@@ -254,7 +257,7 @@ pin-controller-front {
pio5: gpio@fee00000 { pio5: gpio@fee00000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -262,7 +265,7 @@ pio5: gpio@fee00000 { ...@@ -262,7 +265,7 @@ pio5: gpio@fee00000 {
}; };
pio6: gpio@fee01000 { pio6: gpio@fee01000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -270,7 +273,7 @@ pio6: gpio@fee01000 { ...@@ -270,7 +273,7 @@ pio6: gpio@fee01000 {
}; };
pio7: gpio@fee02000 { pio7: gpio@fee02000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -278,7 +281,7 @@ pio7: gpio@fee02000 { ...@@ -278,7 +281,7 @@ pio7: gpio@fee02000 {
}; };
pio8: gpio@fee03000 { pio8: gpio@fee03000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -286,7 +289,7 @@ pio8: gpio@fee03000 { ...@@ -286,7 +289,7 @@ pio8: gpio@fee03000 {
}; };
pio9: gpio@fee04000 { pio9: gpio@fee04000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
...@@ -294,7 +297,7 @@ pio9: gpio@fee04000 { ...@@ -294,7 +297,7 @@ pio9: gpio@fee04000 {
}; };
pio10: gpio@fee05000 { pio10: gpio@fee05000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x5000 0x100>; reg = <0x5000 0x100>;
...@@ -302,7 +305,7 @@ pio10: gpio@fee05000 { ...@@ -302,7 +305,7 @@ pio10: gpio@fee05000 {
}; };
pio11: gpio@fee06000 { pio11: gpio@fee06000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x6000 0x100>; reg = <0x6000 0x100>;
...@@ -310,7 +313,7 @@ pio11: gpio@fee06000 { ...@@ -310,7 +313,7 @@ pio11: gpio@fee06000 {
}; };
pio12: gpio@fee07000 { pio12: gpio@fee07000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x7000 0x100>; reg = <0x7000 0x100>;
...@@ -318,7 +321,7 @@ pio12: gpio@fee07000 { ...@@ -318,7 +321,7 @@ pio12: gpio@fee07000 {
}; };
pio30: gpio@fee08000 { pio30: gpio@fee08000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x8000 0x100>; reg = <0x8000 0x100>;
...@@ -326,7 +329,7 @@ pio30: gpio@fee08000 { ...@@ -326,7 +329,7 @@ pio30: gpio@fee08000 {
}; };
pio31: gpio@fee09000 { pio31: gpio@fee09000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x9000 0x100>; reg = <0x9000 0x100>;
...@@ -337,6 +340,7 @@ pwm0 { ...@@ -337,6 +340,7 @@ pwm0 {
pinctrl_pwm0_chan0_default: pwm0-0-default { pinctrl_pwm0_chan0_default: pwm0-0-default {
st,pins { st,pins {
pwm-out = <&pio9 7 ALT2 OUT>; pwm-out = <&pio9 7 ALT2 OUT>;
pwm-capturein = <&pio9 6 ALT2 IN>;
}; };
}; };
}; };
...@@ -404,7 +408,7 @@ pin-controller-rear { ...@@ -404,7 +408,7 @@ pin-controller-rear {
pio13: gpio@fe820000 { pio13: gpio@fe820000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -412,7 +416,7 @@ pio13: gpio@fe820000 { ...@@ -412,7 +416,7 @@ pio13: gpio@fe820000 {
}; };
pio14: gpio@fe821000 { pio14: gpio@fe821000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -420,7 +424,7 @@ pio14: gpio@fe821000 { ...@@ -420,7 +424,7 @@ pio14: gpio@fe821000 {
}; };
pio15: gpio@fe822000 { pio15: gpio@fe822000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -428,7 +432,7 @@ pio15: gpio@fe822000 { ...@@ -428,7 +432,7 @@ pio15: gpio@fe822000 {
}; };
pio16: gpio@fe823000 { pio16: gpio@fe823000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -436,7 +440,7 @@ pio16: gpio@fe823000 { ...@@ -436,7 +440,7 @@ pio16: gpio@fe823000 {
}; };
pio17: gpio@fe824000 { pio17: gpio@fe824000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
...@@ -444,7 +448,7 @@ pio17: gpio@fe824000 { ...@@ -444,7 +448,7 @@ pio17: gpio@fe824000 {
}; };
pio18: gpio@fe825000 { pio18: gpio@fe825000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x5000 0x100>; reg = <0x5000 0x100>;
...@@ -576,6 +580,7 @@ pwm0 { ...@@ -576,6 +580,7 @@ pwm0 {
pinctrl_pwm0_chan1_default: pwm0-1-default { pinctrl_pwm0_chan1_default: pwm0-1-default {
st,pins { st,pins {
pwm-out = <&pio13 2 ALT2 OUT>; pwm-out = <&pio13 2 ALT2 OUT>;
pwm-capturein = <&pio13 1 ALT2 IN>;
}; };
}; };
pinctrl_pwm0_chan2_default: pwm0-2-default { pinctrl_pwm0_chan2_default: pwm0-2-default {
...@@ -605,7 +610,7 @@ pin-controller-fvdp-fe { ...@@ -605,7 +610,7 @@ pin-controller-fvdp-fe {
pio100: gpio@fd6b0000 { pio100: gpio@fd6b0000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -613,7 +618,7 @@ pio100: gpio@fd6b0000 { ...@@ -613,7 +618,7 @@ pio100: gpio@fd6b0000 {
}; };
pio101: gpio@fd6b1000 { pio101: gpio@fd6b1000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -621,7 +626,7 @@ pio101: gpio@fd6b1000 { ...@@ -621,7 +626,7 @@ pio101: gpio@fd6b1000 {
}; };
pio102: gpio@fd6b2000 { pio102: gpio@fd6b2000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -642,7 +647,7 @@ pin-controller-fvdp-lite { ...@@ -642,7 +647,7 @@ pin-controller-fvdp-lite {
pio103: gpio@fd330000 { pio103: gpio@fd330000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0 0x100>; reg = <0 0x100>;
...@@ -650,7 +655,7 @@ pio103: gpio@fd330000 { ...@@ -650,7 +655,7 @@ pio103: gpio@fd330000 {
}; };
pio104: gpio@fd331000 { pio104: gpio@fd331000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
...@@ -658,7 +663,7 @@ pio104: gpio@fd331000 { ...@@ -658,7 +663,7 @@ pio104: gpio@fd331000 {
}; };
pio105: gpio@fd332000 { pio105: gpio@fd332000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -666,7 +671,7 @@ pio105: gpio@fd332000 { ...@@ -666,7 +671,7 @@ pio105: gpio@fd332000 {
}; };
pio106: gpio@fd333000 { pio106: gpio@fd333000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
...@@ -675,7 +680,7 @@ pio106: gpio@fd333000 { ...@@ -675,7 +680,7 @@ pio106: gpio@fd333000 {
pio107: gpio@fd334000 { pio107: gpio@fd334000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <2>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
......
arch/arm/boot/dts/stih416.dtsi
View file @ a60bb261
...@@ -474,6 +474,7 @@ pwm0: pwm@fed10000 { ...@@ -474,6 +474,7 @@ pwm0: pwm@fed10000 {
status = "disabled"; status = "disabled";
#pwm-cells = <2>; #pwm-cells = <2>;
reg = <0xfed10000 0x68>; reg = <0xfed10000 0x68>;
interrupts = <GIC_SPI 200 IRQ_TYPE_NONE>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default pinctrl-0 = <&pinctrl_pwm0_chan0_default
...@@ -481,9 +482,11 @@ &pinctrl_pwm0_chan1_default ...@@ -481,9 +482,11 @@ &pinctrl_pwm0_chan1_default
&pinctrl_pwm0_chan2_default &pinctrl_pwm0_chan2_default
&pinctrl_pwm0_chan3_default>; &pinctrl_pwm0_chan3_default>;
clock-names = "pwm"; clock-names = "pwm", "capture";
clocks = <&clk_sysin>; clocks = <&clk_sysin>, <&clk_s_a0_ls CLK_ICN_REG>;
st,pwm-num-chan = <4>; st,pwm-num-chan = <4>;
st,capture-num-chan = <2>;
}; };
/* SBC PWM Module */ /* SBC PWM Module */
...@@ -492,6 +495,7 @@ pwm1: pwm@fe510000 { ...@@ -492,6 +495,7 @@ pwm1: pwm@fe510000 {
status = "disabled"; status = "disabled";
#pwm-cells = <2>; #pwm-cells = <2>;
reg = <0xfe510000 0x68>; reg = <0xfe510000 0x68>;
interrupts = <GIC_SPI 202 IRQ_TYPE_NONE>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default pinctrl-0 = <&pinctrl_pwm1_chan0_default
......
arch/arm/boot/dts/stih41x-b2000.dtsi
View file @ a60bb261
...@@ -7,6 +7,8 @@ ...@@ -7,6 +7,8 @@
* publishhed by the Free Software Foundation. * publishhed by the Free Software Foundation.
*/ */
#include <dt-bindings/input/input.h> #include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
memory{ memory{
...@@ -33,9 +35,8 @@ serial2: serial@fed32000 { ...@@ -33,9 +35,8 @@ serial2: serial@fed32000 {
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
fp_led { fp_led {
#gpio-cells = <1>;
label = "Front Panel LED"; label = "Front Panel LED";
gpios = <&pio105 7>; gpios = <&pio105 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
......
arch/arm/boot/dts/stihxxx-b2120.dtsi
View file @ a60bb261
...@@ -18,14 +18,12 @@ sbc_serial0: serial@9530000 { ...@@ -18,14 +18,12 @@ sbc_serial0: serial@9530000 {
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
red { red {
#gpio-cells = <2>;
label = "Front Panel LED"; label = "Front Panel LED";
gpios = <&pio4 1 0>; gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
green { green {
#gpio-cells = <2>; gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
gpios = <&pio1 3 0>;
default-state = "off"; default-state = "off";
}; };
}; };
...@@ -136,5 +134,50 @@ tsin0: port@0 { ...@@ -136,5 +134,50 @@ tsin0: port@0 {
dvb-card = <STV0367_TDA18212_NIMA_1>; dvb-card = <STV0367_TDA18212_NIMA_1>;
}; };
}; };
sti_uni_player2: sti-uni-player@8d82000 {
status = "okay";
};
sti_uni_player3: sti-uni-player@8d85000 {
status = "okay";
};
sti_sasg_codec: sti-sasg-codec {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif_out>;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sti audio card";
status = "okay";
simple-audio-card,dai-link@0 {
/* DAC */
format = "i2s";
mclk-fs = <256>;
cpu {
sound-dai = <&sti_uni_player2>;
};
codec {
sound-dai = <&sti_sasg_codec 1>;
};
};
simple-audio-card,dai-link@1 {
/* SPDIF */
format = "left_j";
mclk-fs = <128>;
cpu {
sound-dai = <&sti_uni_player3>;
};
codec {
sound-dai = <&sti_sasg_codec 0>;
};
};
};
}; };
}; };
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7