Commit a6672530 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: addi_apci_3501: remove timer/counter subdevice support

This driver is for a simple 4/8 channel analog output board with 2 isolated
digital inputs and 2 isolated digital outputs. Support for these subdevices
is provided by the driver.

The boards also has a watchdog timer that can be used to reset the analog
outputs. It can also be used as a general purpose 12-bit timer when the
watchdog function is not necessary. The current support code for this
subdevice is broken. It does not follow the comedi API and requires some
out-of-tree patches in order to even work.

Remove the subdevice support. If a proper register map can be located for
this board we can add support back later.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 686869b4
/* Watchdog Related Defines */
#define ADDIDATA_TIMER 0
#define ADDIDATA_WATCHDOG 2
/*
* (*insn_config) for the timer subdevice
*
* Configures The Timer, Counter or Watchdog
* Data Pointer contains configuration parameters as below
* data[0] : 0 Configure As Timer
* 1 Configure As Counter
* 2 Configure As Watchdog
* data[1] : 1 Enable Interrupt
* 0 Disable Interrupt
* data[2] : Time Unit
* data[3] : Reload Value
*/
static int apci3501_config_insn_timer(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct apci3501_private *devpriv = dev->private;
unsigned int ctrl;
if (data[0] != ADDIDATA_WATCHDOG &&
data[0] != ADDIDATA_TIMER)
return -EINVAL;
devpriv->tsk_Current = current;
devpriv->timer_mode = data[0];
/* first, disable the watchdog or stop the timer */
if (devpriv->timer_mode == ADDIDATA_WATCHDOG) {
ctrl = 0;
} else {
ctrl = inl(devpriv->tcw + ADDI_TCW_CTRL_REG);
ctrl &= ~(ADDI_TCW_CTRL_GATE | ADDI_TCW_CTRL_TRIG |
ADDI_TCW_CTRL_ENA);
}
outl(ctrl, devpriv->tcw + ADDI_TCW_CTRL_REG);
/* enable/disable the timer interrupt */
ctrl = (data[1] == 1) ? ADDI_TCW_CTRL_IRQ_ENA : 0;
outl(ctrl, devpriv->tcw + ADDI_TCW_CTRL_REG);
outl(data[2], devpriv->tcw + ADDI_TCW_TIMEBASE_REG);
outl(data[3], devpriv->tcw + ADDI_TCW_RELOAD_REG);
ctrl = inl(devpriv->tcw + ADDI_TCW_CTRL_REG);
if (devpriv->timer_mode == ADDIDATA_WATCHDOG) {
/* Set the mode (e2->e0) NOTE: this doesn't look correct */
ctrl |= ~(ADDI_TCW_CTRL_CNT_UP | ADDI_TCW_CTRL_EXT_CLK_MASK |
ADDI_TCW_CTRL_MODE_MASK | ADDI_TCW_CTRL_GATE |
ADDI_TCW_CTRL_TRIG | ADDI_TCW_CTRL_TIMER_ENA |
ADDI_TCW_CTRL_RESET_ENA | ADDI_TCW_CTRL_WARN_ENA |
ADDI_TCW_CTRL_IRQ_ENA | ADDI_TCW_CTRL_ENA);
} else {
/* mode 2 */
ctrl &= ~(ADDI_TCW_CTRL_CNTR_ENA | ADDI_TCW_CTRL_MODE_MASK |
ADDI_TCW_CTRL_GATE | ADDI_TCW_CTRL_TRIG |
ADDI_TCW_CTRL_TIMER_ENA | ADDI_TCW_CTRL_RESET_ENA |
ADDI_TCW_CTRL_WARN_ENA | ADDI_TCW_CTRL_ENA);
ctrl |= ADDI_TCW_CTRL_MODE(2) | ADDI_TCW_CTRL_TIMER_ENA;
}
outl(ctrl, devpriv->tcw + ADDI_TCW_CTRL_REG);
return insn->n;
}
/*
* (*insn_write) for the timer subdevice
*
* Start / Stop The Selected Timer , Counter or Watchdog
* Data Pointer contains configuration parameters as below
* data[0] : 0 Timer
* 1 Counter
* 2 Watchdog
* data[1] : 1 Start
* 0 Stop
* 2 Trigger
*/
static int apci3501_write_insn_timer(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct apci3501_private *devpriv = dev->private;
unsigned int ctrl;
if (devpriv->timer_mode == ADDIDATA_WATCHDOG ||
devpriv->timer_mode == ADDIDATA_TIMER) {
ctrl = inl(devpriv->tcw + ADDI_TCW_CTRL_REG);
ctrl &= ~(ADDI_TCW_CTRL_GATE | ADDI_TCW_CTRL_TRIG);
if (data[1] == 1) { /* enable */
ctrl |= ADDI_TCW_CTRL_ENA;
} else if (data[1] == 0) { /* stop */
if (devpriv->timer_mode == ADDIDATA_WATCHDOG)
ctrl = 0;
else
ctrl &= ~ADDI_TCW_CTRL_ENA;
} else if (data[1] == 2) { /* trigger */
ctrl |= ADDI_TCW_CTRL_TRIG;
}
outl(ctrl, devpriv->tcw + ADDI_TCW_CTRL_REG);
}
inl(devpriv->tcw + ADDI_TCW_STATUS_REG);
return insn->n;
}
/*
* (*insn_read) for the timer subdevice
*
* Read The Selected Timer, Counter or Watchdog
* Data Pointer contains configuration parameters as below
* data[0] : 0 Timer
* 1 Counter
* 2 Watchdog
* data[1] : Timer Counter Watchdog Number
*/
static int apci3501_read_insn_timer(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct apci3501_private *devpriv = dev->private;
if (devpriv->timer_mode != ADDIDATA_TIMER &&
devpriv->timer_mode != ADDIDATA_WATCHDOG)
return -EINVAL;
data[0] = inl(devpriv->tcw + ADDI_TCW_STATUS_REG) &
ADDI_TCW_STATUS_OVERFLOW;
data[1] = inl(devpriv->tcw + ADDI_TCW_VAL_REG);
return insn->n;
}
......@@ -23,11 +23,8 @@
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include "../comedi_pci.h"
#include "addi_tcw.h"
#include "amcc_s5933.h"
/*
......@@ -67,8 +64,6 @@
struct apci3501_private {
unsigned long amcc;
unsigned long tcw;
struct task_struct *tsk_Current;
unsigned char timer_mode;
};
......@@ -139,8 +134,6 @@ static int apci3501_ao_insn_write(struct comedi_device *dev,
return insn->n;
}
#include "addi-data/hwdrv_apci3501.c"
static int apci3501_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
......@@ -253,37 +246,6 @@ static int apci3501_eeprom_insn_read(struct comedi_device *dev,
return insn->n;
}
static irqreturn_t apci3501_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
struct apci3501_private *devpriv = dev->private;
unsigned int status;
unsigned int ctrl;
/* Disable Interrupt */
ctrl = inl(devpriv->tcw + ADDI_TCW_CTRL_REG);
ctrl &= ~(ADDI_TCW_CTRL_GATE | ADDI_TCW_CTRL_TRIG |
ADDI_TCW_CTRL_IRQ_ENA);
outl(ctrl, devpriv->tcw + ADDI_TCW_CTRL_REG);
status = inl(devpriv->tcw + ADDI_TCW_IRQ_REG);
if (!(status & ADDI_TCW_IRQ)) {
dev_err(dev->class_dev, "IRQ from unknown source\n");
return IRQ_NONE;
}
/* Enable Interrupt Send a signal to from kernel to user space */
send_sig(SIGIO, devpriv->tsk_Current, 0);
ctrl = inl(devpriv->tcw + ADDI_TCW_CTRL_REG);
ctrl &= ~(ADDI_TCW_CTRL_GATE | ADDI_TCW_CTRL_TRIG |
ADDI_TCW_CTRL_IRQ_ENA);
ctrl |= ADDI_TCW_CTRL_IRQ_ENA;
outl(ctrl, devpriv->tcw + ADDI_TCW_CTRL_REG);
inl(devpriv->tcw + ADDI_TCW_STATUS_REG);
return IRQ_HANDLED;
}
static int apci3501_reset(struct comedi_device *dev)
{
unsigned int val;
......@@ -333,17 +295,9 @@ static int apci3501_auto_attach(struct comedi_device *dev,
devpriv->amcc = pci_resource_start(pcidev, 0);
dev->iobase = pci_resource_start(pcidev, 1);
devpriv->tcw = dev->iobase + APCI3501_TIMER_BASE;
ao_n_chan = apci3501_eeprom_get_ao_n_chan(dev);
if (pcidev->irq > 0) {
ret = request_irq(pcidev->irq, apci3501_interrupt, IRQF_SHARED,
dev->board_name, dev);
if (ret == 0)
dev->irq = pcidev->irq;
}
ret = comedi_alloc_subdevices(dev, 5);
if (ret)
return ret;
......@@ -383,17 +337,9 @@ static int apci3501_auto_attach(struct comedi_device *dev,
s->range_table = &range_digital;
s->insn_bits = apci3501_do_insn_bits;
/* Initialize the timer/watchdog subdevice */
/* Timer/Watchdog subdevice */
s = &dev->subdevices[3];
s->type = COMEDI_SUBD_TIMER;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 1;
s->maxdata = 0;
s->len_chanlist = 1;
s->range_table = &range_digital;
s->insn_write = apci3501_write_insn_timer;
s->insn_read = apci3501_read_insn_timer;
s->insn_config = apci3501_config_insn_timer;
s->type = COMEDI_SUBD_UNUSED;
/* Initialize the eeprom subdevice */
s = &dev->subdevices[4];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment