Merge branch 'net-phy-eee-2'

Heiner Kallweit says:

====================
net: phy: add support for the EEE 2 registers

This series adds support for the EEE 2 registers. Most relevant and
for now the only supported modes are 2500baseT and 5000baseT.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/phy-c45.c

@@ -706,6 +706,22 @@ int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv)
 			changed = 1;
 	}
 
+	if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+		val = linkmode_to_mii_eee_cap2_t(adv);
+
+		/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
+		 * (Register 7.62)
+		 */
+		val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
+					     MDIO_AN_EEE_ADV2,
+					     MDIO_EEE_2_5GT | MDIO_EEE_5GT,
+					     val);
+		if (val < 0)
+			return val;
+		if (val > 0)
+			changed = 1;
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported_eee)) {
 		val = linkmode_adv_to_mii_10base_t1_t(adv);
@@ -745,6 +761,17 @@ int genphy_c45_read_eee_adv(struct phy_device *phydev, unsigned long *adv)
 		mii_eee_cap1_mod_linkmode_t(adv, val);
 	}
 
+	if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+		/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
+		 * (Register 7.62)
+		 */
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2);
+		if (val < 0)
+			return val;
+
+		mii_eee_cap2_mod_linkmode_adv_t(adv, val);
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported_eee)) {
 		/* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register
@@ -781,6 +808,17 @@ static int genphy_c45_read_eee_lpa(struct phy_device *phydev,
 		mii_eee_cap1_mod_linkmode_t(lpa, val);
 	}
 
+	if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+		/* IEEE 802.3-2022 45.2.7.17 EEE link partner ability 2
+		 * (Register 7.63)
+		 */
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE2);
+		if (val < 0)
+			return val;
+
+		mii_eee_cap2_mod_linkmode_adv_t(lpa, val);
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported_eee)) {
 		/* IEEE 802.3cg-2019 45.2.7.26 10BASE-T1 AN status register
@@ -830,6 +868,30 @@ static int genphy_c45_read_eee_cap1(struct phy_device *phydev)
 	return 0;
 }
 
+/**
+ * genphy_c45_read_eee_cap2 - read supported EEE link modes from register 3.21
+ * @phydev: target phy_device struct
+ */
+static int genphy_c45_read_eee_cap2(struct phy_device *phydev)
+{
+	int val;
+
+	/* IEEE 802.3-2022 45.2.3.11 EEE control and capability 2
+	 * (Register 3.21)
+	 */
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE2);
+	if (val < 0)
+		return val;
+
+	/* IEEE 802.3-2022 45.2.3.11 says 9 bits are reserved. */
+	if (val == 0xffff)
+		return 0;
+
+	mii_eee_cap2_mod_linkmode_sup_t(phydev->supported_eee, val);
+
+	return 0;
+}
+
 /**
  * genphy_c45_read_eee_abilities - read supported EEE link modes
  * @phydev: target phy_device struct
@@ -848,6 +910,13 @@ int genphy_c45_read_eee_abilities(struct phy_device *phydev)
 			return val;
 	}
 
+	/* Same for cap2 (3.21) */
+	if (linkmode_intersects(phydev->supported, PHY_EEE_CAP2_FEATURES)) {
+		val = genphy_c45_read_eee_cap2(phydev);
+		if (val)
+			return val;
+	}
+
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
 			      phydev->supported)) {
 		/* IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register

drivers/net/phy/phy_device.c

@@ -148,6 +148,14 @@ static const int phy_eee_cap1_features_array[] = {
 __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init;
 EXPORT_SYMBOL_GPL(phy_eee_cap1_features);
 
+static const int phy_eee_cap2_features_array[] = {
+	ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+};
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_eee_cap2_features);
+
 static void features_init(void)
 {
 	/* 10/100 half/full*/
@@ -232,6 +240,9 @@ static void features_init(void)
 	linkmode_set_bit_array(phy_eee_cap1_features_array,
 			       ARRAY_SIZE(phy_eee_cap1_features_array),
 			       phy_eee_cap1_features);
+	linkmode_set_bit_array(phy_eee_cap2_features_array,
+			       ARRAY_SIZE(phy_eee_cap2_features_array),
+			       phy_eee_cap2_features);
 
 }
 

include/linux/mdio.h

@@ -439,6 +439,42 @@ static inline void mii_eee_cap1_mod_linkmode_t(unsigned long *adv, u32 val)
 			 adv, val & MDIO_EEE_10GKR);
 }
 
+/**
+ * mii_eee_cap2_mod_linkmode_sup_t()
+ * @adv: target the linkmode settings
+ * @val: register value
+ *
+ * A function that translates value of following registers to the linkmode:
+ * IEEE 802.3-2022 45.2.3.11 "EEE control and capability 2" register (3.21)
+ */
+static inline void mii_eee_cap2_mod_linkmode_sup_t(unsigned long *adv, u32 val)
+{
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 adv, val & MDIO_EEE_2_5GT);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			 adv, val & MDIO_EEE_5GT);
+}
+
+/**
+ * mii_eee_cap2_mod_linkmode_adv_t()
+ * @adv: target the linkmode advertisement settings
+ * @val: register value
+ *
+ * A function that translates value of following registers to the linkmode:
+ * IEEE 802.3-2022 45.2.7.16 "EEE advertisement 2" register (7.62)
+ * IEEE 802.3-2022 45.2.7.17 "EEE link partner ability 2" register (7.63)
+ * Note: Currently this function is the same as mii_eee_cap2_mod_linkmode_sup_t.
+ *       For certain, not yet supported, modes however the bits differ.
+ *       Therefore create separate functions already.
+ */
+static inline void mii_eee_cap2_mod_linkmode_adv_t(unsigned long *adv, u32 val)
+{
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 adv, val & MDIO_EEE_2_5GT);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			 adv, val & MDIO_EEE_5GT);
+}
+
 /**
  * linkmode_to_mii_eee_cap1_t()
  * @adv: the linkmode advertisement settings
@@ -466,6 +502,25 @@ static inline u32 linkmode_to_mii_eee_cap1_t(unsigned long *adv)
 	return result;
 }
 
+/**
+ * linkmode_to_mii_eee_cap2_t()
+ * @adv: the linkmode advertisement settings
+ *
+ * A function that translates linkmode to value for IEEE 802.3-2022 45.2.7.16
+ * "EEE advertisement 2" register (7.62)
+ */
+static inline u32 linkmode_to_mii_eee_cap2_t(unsigned long *adv)
+{
+	u32 result = 0;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, adv))
+		result |= MDIO_EEE_2_5GT;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, adv))
+		result |= MDIO_EEE_5GT;
+
+	return result;
+}
+
 /**
  * mii_10base_t1_adv_mod_linkmode_t()
  * @adv: linkmode advertisement settings

include/linux/phy.h

@@ -54,6 +54,7 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init;
 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init;
 
 #define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features)
 #define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features)
@@ -65,6 +66,7 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init;
 #define PHY_10GBIT_FEC_FEATURES ((unsigned long *)&phy_10gbit_fec_features)
 #define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features)
 #define PHY_EEE_CAP1_FEATURES ((unsigned long *)&phy_eee_cap1_features)
+#define PHY_EEE_CAP2_FEATURES ((unsigned long *)&phy_eee_cap2_features)
 
 extern const int phy_basic_ports_array[3];
 extern const int phy_fibre_port_array[1];