Merge patch series "can: remove litteral strings used for driver names and remove DRV_VERSION"

Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:

====================

This is a cleanup series.

The patches 1 to 8 get rid of any hardcoded strings and instead relies
on the KBUILD_MODNAME macros to get the device name. Patch 9 replaces
the ES58X_MODULE_NAME macro with KBUILD_MODNAME in
etas_es58x. Finally, also in etas_es58x, patch 10 removes the
DRV_VERSION so that the module uses the default behavior and advertise
the kernel version instead of a custom version.

* Changelog *

v1 -> v2:

  * The patch for esd_usb contained some changes for ems_usb.

  * v1 assumed that KBUILD_MODNAME could only be used when the file
    basename and the module had the same name (e.g. vcan.c for the
    vcan.ko). The fact is that KBUILD_NAME extends to the module name
    and can thus be used even if the basename is different
    (e.g. slcan-core.c and slcan.ko)

  * Add patch #9: can: etas_es58x: replace ES58X_MODULE_NAME with
    KBUILD_MODNAME

v1: https://lore.kernel.org/all/20220725153124.467061-1-mailhol.vincent@wanadoo.fr

This series are the first 9 patches of:
https://lore.kernel.org/linux-can/20220725133208.432176-1-mailhol.vincent@wanadoo.fr/T/

The initial intent of those 9 patches was to do so cleanup in order to
implement ethtool_ops::get_drvinfo but this appeared to be useless:
https://lore.kernel.org/linux-can/20220725140911.2djwxfrx3kdmjeuc@pengutronix.de/

Instead, those patch are send as a standalone series.

====================

Drop "[PATCH v2 03/10] can: slcan: use KBUILD_MODNAME and define
pr_fmt to replace hardcoded names" to avoid conflicts with Dario
Binacchi's work on the slcan driver.

Link: https://lore.kernel.org/all/20220726082707.58758-1-mailhol.vincent@wanadoo.frSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/can327.c

@@ -10,7 +10,7 @@
  *                   Fred N. van Kempen <waltje@uwalt.nl.mugnet.org>
  */
 
-#define pr_fmt(fmt) "can327: " fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/init.h>
 #include <linux/module.h>
@@ -1100,7 +1100,7 @@ static int can327_ldisc_ioctl(struct tty_struct *tty, unsigned int cmd,
 
 static struct tty_ldisc_ops can327_ldisc = {
 	.owner = THIS_MODULE,
-	.name = "can327",
+	.name = KBUILD_MODNAME,
 	.num = N_CAN327,
 	.receive_buf = can327_ldisc_rx,
 	.write_wakeup = can327_ldisc_tx_wakeup,

drivers/net/can/softing/softing_main.c

@@ -612,7 +612,7 @@ static const struct net_device_ops softing_netdev_ops = {
 };
 
 static const struct can_bittiming_const softing_btr_const = {
-	.name = "softing",
+	.name = KBUILD_MODNAME,
 	.tseg1_min = 1,
 	.tseg1_max = 16,
 	.tseg2_min = 1,
@@ -846,7 +846,7 @@ static int softing_pdev_probe(struct platform_device *pdev)
 
 static struct platform_driver softing_driver = {
 	.driver = {
-		.name = "softing",
+		.name = KBUILD_MODNAME,
 	},
 	.probe = softing_pdev_probe,
 	.remove = softing_pdev_remove,

drivers/net/can/usb/ems_usb.c

@@ -880,7 +880,7 @@ static const struct net_device_ops ems_usb_netdev_ops = {
 };
 
 static const struct can_bittiming_const ems_usb_bittiming_const = {
-	.name = "ems_usb",
+	.name = KBUILD_MODNAME,
 	.tseg1_min = 1,
 	.tseg1_max = 16,
 	.tseg2_min = 1,
@@ -1074,7 +1074,7 @@ static void ems_usb_disconnect(struct usb_interface *intf)
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver ems_usb_driver = {
-	.name = "ems_usb",
+	.name = KBUILD_MODNAME,
 	.probe = ems_usb_probe,
 	.disconnect = ems_usb_disconnect,
 	.id_table = ems_usb_table,

drivers/net/can/usb/esd_usb.c

@@ -1138,7 +1138,7 @@ static void esd_usb_disconnect(struct usb_interface *intf)
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver esd_usb_driver = {
-	.name = "esd_usb",
+	.name = KBUILD_MODNAME,
 	.probe = esd_usb_probe,
 	.disconnect = esd_usb_disconnect,
 	.id_table = esd_usb_table,

drivers/net/can/usb/etas_es58x/es58x_core.c

@@ -18,14 +18,11 @@
 
 #include "es58x_core.h"
 
-#define DRV_VERSION "1.00"
 MODULE_AUTHOR("Vincent Mailhol <mailhol.vincent@wanadoo.fr>");
 MODULE_AUTHOR("Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>");
 MODULE_DESCRIPTION("Socket CAN driver for ETAS ES58X USB adapters");
-MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL v2");
 
-#define ES58X_MODULE_NAME "etas_es58x"
 #define ES58X_VENDOR_ID 0x108C
 #define ES581_4_PRODUCT_ID 0x0159
 #define ES582_1_PRODUCT_ID 0x0168
@@ -59,11 +56,11 @@ MODULE_DEVICE_TABLE(usb, es58x_id_table);
 
 #define es58x_print_hex_dump(buf, len)					\
 	print_hex_dump(KERN_DEBUG,					\
-		       ES58X_MODULE_NAME " " __stringify(buf) ": ",	\
+		       KBUILD_MODNAME " " __stringify(buf) ": ",	\
 		       DUMP_PREFIX_NONE, 16, 1, buf, len, false)
 
 #define es58x_print_hex_dump_debug(buf, len)				 \
-	print_hex_dump_debug(ES58X_MODULE_NAME " " __stringify(buf) ": ",\
+	print_hex_dump_debug(KBUILD_MODNAME " " __stringify(buf) ": ",\
 			     DUMP_PREFIX_NONE, 16, 1, buf, len, false)
 
 /* The last two bytes of an ES58X command is a CRC16. The first two
@@ -2181,9 +2178,8 @@ static struct es58x_device *es58x_init_es58x_dev(struct usb_interface *intf,
 	struct usb_endpoint_descriptor *ep_in, *ep_out;
 	int ret;
 
-	dev_info(dev,
-		 "Starting %s %s (Serial Number %s) driver version %s\n",
-		 udev->manufacturer, udev->product, udev->serial, DRV_VERSION);
+	dev_info(dev, "Starting %s %s (Serial Number %s)\n",
+		 udev->manufacturer, udev->product, udev->serial);
 
 	ret = usb_find_common_endpoints(intf->cur_altsetting, &ep_in, &ep_out,
 					NULL, NULL);
@@ -2280,7 +2276,7 @@ static void es58x_disconnect(struct usb_interface *intf)
 }
 
 static struct usb_driver es58x_driver = {
-	.name = ES58X_MODULE_NAME,
+	.name = KBUILD_MODNAME,
 	.probe = es58x_probe,
 	.disconnect = es58x_disconnect,
 	.id_table = es58x_id_table

drivers/net/can/usb/gs_usb.c

@@ -993,7 +993,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 	netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */
 
 	/* dev setup */
-	strcpy(dev->bt_const.name, "gs_usb");
+	strcpy(dev->bt_const.name, KBUILD_MODNAME);
 	dev->bt_const.tseg1_min = le32_to_cpu(bt_const->tseg1_min);
 	dev->bt_const.tseg1_max = le32_to_cpu(bt_const->tseg1_max);
 	dev->bt_const.tseg2_min = le32_to_cpu(bt_const->tseg2_min);
@@ -1100,7 +1100,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 			return ERR_PTR(rc);
 		}
 
-		strcpy(dev->data_bt_const.name, "gs_usb");
+		strcpy(dev->data_bt_const.name, KBUILD_MODNAME);
 		dev->data_bt_const.tseg1_min = le32_to_cpu(bt_const_extended->dtseg1_min);
 		dev->data_bt_const.tseg1_max = le32_to_cpu(bt_const_extended->dtseg1_max);
 		dev->data_bt_const.tseg2_min = le32_to_cpu(bt_const_extended->dtseg2_min);
@@ -1270,7 +1270,7 @@ static const struct usb_device_id gs_usb_table[] = {
 MODULE_DEVICE_TABLE(usb, gs_usb_table);
 
 static struct usb_driver gs_usb_driver = {
-	.name = "gs_usb",
+	.name = KBUILD_MODNAME,
 	.probe = gs_usb_probe,
 	.disconnect = gs_usb_disconnect,
 	.id_table = gs_usb_table,

drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

@@ -869,7 +869,7 @@ static void kvaser_usb_disconnect(struct usb_interface *intf)
 }
 
 static struct usb_driver kvaser_usb_driver = {
-	.name = "kvaser_usb",
+	.name = KBUILD_MODNAME,
 	.probe = kvaser_usb_probe,
 	.disconnect = kvaser_usb_disconnect,
 	.id_table = kvaser_usb_table,

drivers/net/can/usb/usb_8dev.c

@@ -871,7 +871,7 @@ static const struct net_device_ops usb_8dev_netdev_ops = {
 };
 
 static const struct can_bittiming_const usb_8dev_bittiming_const = {
-	.name = "usb_8dev",
+	.name = KBUILD_MODNAME,
 	.tseg1_min = 1,
 	.tseg1_max = 16,
 	.tseg2_min = 1,
@@ -997,7 +997,7 @@ static void usb_8dev_disconnect(struct usb_interface *intf)
 }
 
 static struct usb_driver usb_8dev_driver = {
-	.name =		"usb_8dev",
+	.name =		KBUILD_MODNAME,
 	.probe =	usb_8dev_probe,
 	.disconnect =	usb_8dev_disconnect,
 	.id_table =	usb_8dev_table,