Commit a6e7d0a4 authored by Kai Vehmanen's avatar Kai Vehmanen Committed by Takashi Iwai

ALSA: hda: fix jack detection with Realtek codecs when in D3

In case HDA controller becomes active, but codec is runtime suspended,
jack detection is not successful and no interrupt is raised. This has
been observed with multiple Realtek codecs and HDA controllers from
different vendors. Bug does not occur if both codec and controller are
active, or both are in suspend. Bug can be easily hit on desktop systems
with no built-in speaker.

The problem can be fixed by powering up the codec once after every
controller runtime resume. Even if codec goes back to suspend later, the
jack detection will continue to work. Add a flag to 'hda_codec' to
describe codecs that require this flow from the controller driver.
Modify __azx_runtime_resume() to use pm_request_resume() to make the
intent clearer.

Mark all Realtek codecs with the new forced_resume flag.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379
Cc: Kailang Yang <kailang@realtek.com>
Co-developed-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: default avatarKai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201012102704.794423-1-kai.vehmanen@linux.intel.comSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent fe160a22
......@@ -253,6 +253,7 @@ struct hda_codec {
unsigned int force_pin_prefix:1; /* Add location prefix */
unsigned int link_down_at_suspend:1; /* link down at runtime suspend */
unsigned int relaxed_resume:1; /* don't resume forcibly for jack */
unsigned int forced_resume:1; /* forced resume for jack */
unsigned int mst_no_extra_pcms:1; /* no backup PCMs for DP-MST */
#ifdef CONFIG_PM
......
......@@ -1002,12 +1002,14 @@ static void __azx_runtime_resume(struct azx *chip, bool from_rt)
azx_init_pci(chip);
hda_intel_init_chip(chip, true);
if (status && from_rt) {
list_for_each_codec(codec, &chip->bus)
if (!codec->relaxed_resume &&
(status & (1 << codec->addr)))
schedule_delayed_work(&codec->jackpoll_work,
codec->jackpoll_interval);
if (from_rt) {
list_for_each_codec(codec, &chip->bus) {
if (codec->relaxed_resume)
continue;
if (codec->forced_resume || (status & (1 << codec->addr)))
pm_request_resume(hda_codec_dev(codec));
}
}
/* power down again for link-controlled chips */
......
......@@ -1150,6 +1150,7 @@ static int alc_alloc_spec(struct hda_codec *codec, hda_nid_t mixer_nid)
codec->single_adc_amp = 1;
/* FIXME: do we need this for all Realtek codec models? */
codec->spdif_status_reset = 1;
codec->forced_resume = 1;
codec->patch_ops = alc_patch_ops;
err = alc_codec_rename_from_preset(codec);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment