Skip to content

L
linux
Commit a704a1bc authored by Sergio Paracuellos's avatar Sergio Paracuellos Committed by Greg Kroah-Hartman
Browse files
Options

staging: ks7010: add REG suffix to sdio register definitions 

This commit adds REG suffix to register definitions related
with SDIO in order to improve readability.
Signed-off-by: default avatarSergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b60f5f06
Hide whitespace changes
Inline Side-by-side
Showing with 48 additions and 48 deletions
drivers/staging/ks7010/ks7010_sdio.c
View file @ a704a1bc
......@@ -32,33 +32,33 @@
#define SDIO_DEVICE_ID_KS_7010 0x7910
/* Read/Write Status Register */
#define READ_STATUS 0x000000
#define WRITE_STATUS 0x00000C
#define READ_STATUS_REG 0x000000
#define WRITE_STATUS_REG 0x00000C
enum reg_status_type {
REG_STATUS_BUSY,
REG_STATUS_IDLE
};
/* Read Index Register */
#define READ_INDEX 0x000004
#define READ_INDEX_REG 0x000004
/* Read Data Size Register */
#define READ_DATA_SIZE 0x000008
#define READ_DATA_SIZE_REG 0x000008
/* Write Index Register */
#define WRITE_INDEX 0x000010
#define WRITE_INDEX_REG 0x000010
/* Write Status/Read Data Size Register
* for network packet (less than 2048 bytes data)
*/
#define WSTATUS_RSIZE 0x000014
#define WSTATUS_RSIZE_REG 0x000014
#define WSTATUS_MASK 0x80 /* Write Status Register value */
#define RSIZE_MASK 0x7F /* Read Data Size Register value [10:4] */
/* ARM to SD interrupt Enable */
#define INT_ENABLE 0x000020
#define INT_ENABLE_REG 0x000020
/* ARM to SD interrupt Pending */
#define INT_PENDING 0x000024
#define INT_PENDING_REG 0x000024
#define INT_GCR_B BIT(7)
#define INT_GCR_A BIT(6)
......@@ -70,7 +70,7 @@ enum reg_status_type {
#define INT_READ_SIZE BIT(0)
/* General Communication Register A */
#define GCR_A 0x000028
#define GCR_A_REG 0x000028
enum gen_com_reg_a {
GCR_A_INIT,
GCR_A_REMAP,
......@@ -78,14 +78,14 @@ enum gen_com_reg_a {
};
/* General Communication Register B */
#define GCR_B 0x00002C
#define GCR_B_REG 0x00002C
enum gen_com_reg_b {
GCR_B_ACTIVE,
GCR_B_DOZE
};
/* Wakeup Register */
#define WAKEUP 0x008018
#define WAKEUP_REG 0x008018
#define WAKEUP_REQ 0x5a
/* AHB Data Window 0x010000-0x01FFFF */
......@@ -197,9 +197,9 @@ static void ks_wlan_hw_sleep_doze_request(struct ks_wlan_private *priv)
atomic_set(&priv->sleepstatus.doze_request, 0);
if (atomic_read(&priv->sleepstatus.status) == 0) {
ret = ks7010_sdio_writeb(priv, GCR_B, GCR_B_DOZE);
ret = ks7010_sdio_writeb(priv, GCR_B_REG, GCR_B_DOZE);
if (ret) {
netdev_err(priv->net_dev, " error : GCR_B\n");
netdev_err(priv->net_dev, " error : GCR_B_REG\n");
goto set_sleep_mode;
}
atomic_set(&priv->sleepstatus.status, 1);
......@@ -218,9 +218,9 @@ static void ks_wlan_hw_sleep_wakeup_request(struct ks_wlan_private *priv)
atomic_set(&priv->sleepstatus.wakeup_request, 0);
if (atomic_read(&priv->sleepstatus.status) == 1) {
ret = ks7010_sdio_writeb(priv, WAKEUP, WAKEUP_REQ);
ret = ks7010_sdio_writeb(priv, WAKEUP_REG, WAKEUP_REQ);
if (ret) {
netdev_err(priv->net_dev, " error : WAKEUP\n");
netdev_err(priv->net_dev, " error : WAKEUP_REG\n");
goto set_sleep_mode;
}
atomic_set(&priv->sleepstatus.status, 0);
......@@ -237,9 +237,9 @@ void ks_wlan_hw_wakeup_request(struct ks_wlan_private *priv)
int ret;
if (atomic_read(&priv->psstatus.status) == PS_SNOOZE) {
ret = ks7010_sdio_writeb(priv, WAKEUP, WAKEUP_REQ);
ret = ks7010_sdio_writeb(priv, WAKEUP_REG, WAKEUP_REQ);
if (ret)
netdev_err(priv->net_dev, " error : WAKEUP\n");
netdev_err(priv->net_dev, " error : WAKEUP_REG\n");
priv->last_wakeup = jiffies;
++priv->wakeup_count;
......@@ -279,17 +279,17 @@ static void _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
return;
}
ret = ks7010_sdio_readb(priv, INT_PENDING, &byte);
ret = ks7010_sdio_readb(priv, INT_PENDING_REG, &byte);
if (ret) {
netdev_err(priv->net_dev, " error : INT_PENDING\n");
netdev_err(priv->net_dev, " error : INT_PENDING_REG\n");
goto queue_delayed_work;
}
if (byte)
goto queue_delayed_work;
ret = ks7010_sdio_writeb(priv, GCR_B, GCR_B_DOZE);
ret = ks7010_sdio_writeb(priv, GCR_B_REG, GCR_B_DOZE);
if (ret) {
netdev_err(priv->net_dev, " error : GCR_B\n");
netdev_err(priv->net_dev, " error : GCR_B_REG\n");
goto queue_delayed_work;
}
atomic_set(&priv->psstatus.status, PS_SNOOZE);
......@@ -364,9 +364,9 @@ static int write_to_device(struct ks_wlan_private *priv, unsigned char *buffer,
return ret;
}
ret = ks7010_sdio_writeb(priv, WRITE_STATUS, REG_STATUS_BUSY);
ret = ks7010_sdio_writeb(priv, WRITE_STATUS_REG, REG_STATUS_BUSY);
if (ret) {
netdev_err(priv->net_dev, " error : WRITE_STATUS\n");
netdev_err(priv->net_dev, " error : WRITE_STATUS_REG\n");
return ret;
}
......@@ -472,9 +472,9 @@ static void ks_wlan_hw_rx(struct ks_wlan_private *priv, uint16_t size)
DUMP_PREFIX_OFFSET,
rx_buffer->data, 32);
#endif
ret = ks7010_sdio_writeb(priv, READ_STATUS, REG_STATUS_IDLE);
ret = ks7010_sdio_writeb(priv, READ_STATUS_REG, REG_STATUS_IDLE);
if (ret)
netdev_err(priv->net_dev, " error : READ_STATUS\n");
netdev_err(priv->net_dev, " error : READ_STATUS_REG\n");
/* length check fail */
return;
......@@ -485,9 +485,9 @@ static void ks_wlan_hw_rx(struct ks_wlan_private *priv, uint16_t size)
event = le16_to_cpu(hdr->event);
inc_rxqtail(priv);
ret = ks7010_sdio_writeb(priv, READ_STATUS, REG_STATUS_IDLE);
ret = ks7010_sdio_writeb(priv, READ_STATUS_REG, REG_STATUS_IDLE);
if (ret)
netdev_err(priv->net_dev, " error : READ_STATUS\n");
netdev_err(priv->net_dev, " error : READ_STATUS_REG\n");
if (atomic_read(&priv->psstatus.confirm_wait)) {
if (is_hif_conf(event)) {
......@@ -546,9 +546,9 @@ static void ks7010_rw_function(struct work_struct *work)
}
/* read (WriteStatus/ReadDataSize FN1:00_0014) */
ret = ks7010_sdio_readb(priv, WSTATUS_RSIZE, &byte);
ret = ks7010_sdio_readb(priv, WSTATUS_RSIZE_REG, &byte);
if (ret) {
netdev_err(priv->net_dev, " error : WSTATUS_RSIZE psstatus=%d\n",
netdev_err(priv->net_dev, " error : WSTATUS_RSIZE_REG psstatus=%d\n",
atomic_read(&priv->psstatus.status));
goto release_host;
}
......@@ -578,9 +578,9 @@ static void ks_sdio_interrupt(struct sdio_func *func)
if (priv->dev_state < DEVICE_STATE_BOOT)
goto queue_delayed_work;
ret = ks7010_sdio_readb(priv, INT_PENDING, &status);
ret = ks7010_sdio_readb(priv, INT_PENDING_REG, &status);
if (ret) {
netdev_err(priv->net_dev, "error : INT_PENDING\n");
netdev_err(priv->net_dev, "error : INT_PENDING_REG\n");
goto queue_delayed_work;
}
......@@ -591,9 +591,9 @@ static void ks_sdio_interrupt(struct sdio_func *func)
/* bit2 -> Read Status Busy */
if (status & INT_GCR_B ||
atomic_read(&priv->psstatus.status) == PS_SNOOZE) {
ret = ks7010_sdio_readb(priv, GCR_B, &byte);
ret = ks7010_sdio_readb(priv, GCR_B_REG, &byte);
if (ret) {
netdev_err(priv->net_dev, " error : GCR_B\n");
netdev_err(priv->net_dev, " error : GCR_B_REG\n");
goto queue_delayed_work;
}
if (byte == GCR_B_ACTIVE) {
......@@ -607,9 +607,9 @@ static void ks_sdio_interrupt(struct sdio_func *func)
do {
/* read (WriteStatus/ReadDataSize FN1:00_0014) */
ret = ks7010_sdio_readb(priv, WSTATUS_RSIZE, &byte);
ret = ks7010_sdio_readb(priv, WSTATUS_RSIZE_REG, &byte);
if (ret) {
netdev_err(priv->net_dev, " error : WSTATUS_RSIZE\n");
netdev_err(priv->net_dev, " error : WSTATUS_RSIZE_REG\n");
goto queue_delayed_work;
}
rsize = byte & RSIZE_MASK;
......@@ -675,11 +675,11 @@ static int ks7010_sdio_update_index(struct ks_wlan_private *priv, u32 index)
if (!data_buf)
return -ENOMEM;
ret = ks7010_sdio_write(priv, WRITE_INDEX, data_buf, sizeof(index));
ret = ks7010_sdio_write(priv, WRITE_INDEX_REG, data_buf, sizeof(index));
if (ret)
goto err_free_data_buf;
ret = ks7010_sdio_write(priv, READ_INDEX, data_buf, sizeof(index));
ret = ks7010_sdio_write(priv, READ_INDEX_REG, data_buf, sizeof(index));
if (ret)
goto err_free_data_buf;
......@@ -768,7 +768,7 @@ static int ks7010_copy_firmware(struct ks_wlan_private *priv,
} while (size);
ret = ks7010_sdio_writeb(priv, GCR_A, GCR_A_REMAP);
ret = ks7010_sdio_writeb(priv, GCR_A_REG, GCR_A_REMAP);
free_rom_buf:
kfree(rom_buf);
......@@ -787,7 +787,7 @@ static int ks7010_upload_firmware(struct ks_sdio_card *card)
sdio_claim_host(card->func);
/* Firmware running ? */
ret = ks7010_sdio_readb(priv, GCR_A, &byte);
ret = ks7010_sdio_readb(priv, GCR_A_REG, &byte);
if (ret)
goto release_host;
if (byte == GCR_A_RUN) {
......@@ -808,7 +808,7 @@ static int ks7010_upload_firmware(struct ks_sdio_card *card)
/* Firmware running check */
for (n = 0; n < 50; ++n) {
usleep_range(10000, 11000); /* wait_ms(10); */
ret = ks7010_sdio_readb(priv, GCR_A, &byte);
ret = ks7010_sdio_readb(priv, GCR_A_REG, &byte);
if (ret)
goto release_firmware;
......@@ -913,11 +913,11 @@ static int ks7010_sdio_setup_irqs(struct sdio_func *func)
int ret;
/* interrupt disable */
sdio_writeb(func, 0, INT_ENABLE, &ret);
sdio_writeb(func, 0, INT_ENABLE_REG, &ret);
if (ret)
goto irq_error;
sdio_writeb(func, 0xff, INT_PENDING, &ret);
sdio_writeb(func, 0xff, INT_PENDING_REG, &ret);
if (ret)
goto irq_error;
......@@ -940,18 +940,18 @@ static void ks7010_sdio_init_irqs(struct sdio_func *func,
* (ARMtoSD_InterruptPending FN1:00_0024)
*/
sdio_claim_host(func);
ret = ks7010_sdio_writeb(priv, INT_PENDING, 0xff);
ret = ks7010_sdio_writeb(priv, INT_PENDING_REG, 0xff);
sdio_release_host(func);
if (ret)
netdev_err(priv->net_dev, " error : INT_PENDING\n");
netdev_err(priv->net_dev, " error : INT_PENDING_REG\n");
/* enable ks7010sdio interrupt */
byte = (INT_GCR_B | INT_READ_STATUS | INT_WRITE_STATUS);
sdio_claim_host(func);
ret = ks7010_sdio_writeb(priv, INT_ENABLE, byte);
ret = ks7010_sdio_writeb(priv, INT_ENABLE_REG, byte);
sdio_release_host(func);
if (ret)
netdev_err(priv->net_dev, " err : INT_ENABLE\n");
netdev_err(priv->net_dev, " err : INT_ENABLE_REG\n");
}
static void ks7010_private_init(struct ks_wlan_private *priv,
......@@ -1122,8 +1122,8 @@ static void ks7010_sdio_remove(struct sdio_func *func)
/* interrupt disable */
sdio_claim_host(func);
sdio_writeb(func, 0, INT_ENABLE, &ret);
sdio_writeb(func, 0xff, INT_PENDING, &ret);
sdio_writeb(func, 0, INT_ENABLE_REG, &ret);
sdio_writeb(func, 0xff, INT_PENDING_REG, &ret);
sdio_release_host(func);
ret = send_stop_request(func);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7