Merge tag 'for-v3.13' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Highlights:
   - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia.
   - Device tree bindings for TWL4030 chips.
   - Random fixes and cleanups"

* tag 'for-v3.13' of git://git.infradead.org/battery-2.6:
  pm2301-charger: Remove unneeded NULL checks
  twl4030_charger: Add devicetree support
  power_supply: Fix documentation for TEMP_*ALERT* properties
  max17042_battery: Support regmap to access device's registers
  max17042_battery: Use SIMPLE_DEV_PM_OPS
  charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code
  bq2415x_charger: Fix max battery regulation voltage
  tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code
  tps65090-charger: Drop devm_free_irq of devm_ allocated irq
  power_supply: Add support for bq24735 charger
  pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt
  pm2301-charger: Check return value of regulator_enable
  ab8500-charger: Remove redundant break
  ab8500-charger: Check return value of regulator_enable
  isp1704_charger: Fix driver to work with changes introduced in v3.5

Documentation/devicetree/bindings/power/twl-charger.txt

+TWL BCI (Battery Charger Interface)
+
+Required properties:
+- compatible:
+  - "ti,twl4030-bci"
+- interrupts: two interrupt lines from the TWL SIH (secondary
+  interrupt handler) - interrupts 9 and 2.
+
+Optional properties:
+- ti,bb-uvolt: microvolts for charging the backup battery.
+- ti,bb-uamp: microamps for charging the backup battery.
+
+Examples:
+
+bci {
+   compatible = "ti,twl4030-bci";
+   interrupts = <9>, <2>;
+   ti,bb-uvolt = <3200000>;
+   ti,bb-uamp = <150>;
+};

Documentation/devicetree/bindings/power_supply/ti,bq24735.txt

+TI BQ24735 Charge Controller
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq24735"
+
+Optional properties :
+ - interrupts : Specify the interrupt to be used to trigger when the AC
+   adapter is either plugged in or removed.
+ - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
+   presence. This is a Host GPIO that is configured as an input and
+   connected to the bq24735.
+ - ti,charge-current : Used to control and set the charging current. This value
+   must be between 128mA and 8.128A with a 64mA step resolution. The POR value
+   is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
+   about the ChargeCurrent (0x14h) register.
+ - ti,charge-voltage : Used to control and set the charging voltage. This value
+   must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
+   is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
+   about the ChargeVoltage (0x15h) register.
+ - ti,input-current : Used to control and set the charger input current. This
+   value must be between 128mA and 8.064A with a 128mA step resolution. The
+   POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
+   more information about the InputCurrent (0x3fh) register.
+
+Example:
+
+	bq24735@9 {
+		compatible = "ti,bq24735";
+		reg = <0x9>;
+		ti,ac-detect-gpios = <&gpio 72 0x1>;
+	}

Documentation/power/power_supply_class.txt

@@ -135,11 +135,11 @@ CAPACITY_LEVEL - capacity level. This corresponds to
 POWER_SUPPLY_CAPACITY_LEVEL_*.
 
 TEMP - temperature of the power supply.
-TEMP_ALERT_MIN - minimum battery temperature alert value in milli centigrade.
-TEMP_ALERT_MAX - maximum battery temperature alert value in milli centigrade.
+TEMP_ALERT_MIN - minimum battery temperature alert.
+TEMP_ALERT_MAX - maximum battery temperature alert.
 TEMP_AMBIENT - ambient temperature.
-TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert value in milli centigrade.
-TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert value in milli centigrade.
+TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert.
+TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert.
 
 TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e.
 while battery powers a load)

arch/arm/boot/dts/twl4030.dtsi

@@ -19,6 +19,12 @@ rtc {
 		interrupts = <11>;
 	};
 
+	charger: bci {
+		compatible = "ti,twl4030-bci";
+		interrupts = <9>, <2>;
+		bci3v1-supply = <&vusb3v1>;
+	};
+
 	watchdog {
 		compatible = "ti,twl4030-wdt";
 	};

drivers/power/Kconfig

@@ -346,6 +346,12 @@ config CHARGER_BQ24190
 	help
 	  Say Y to enable support for the TI BQ24190 battery charger.
 
+config CHARGER_BQ24735
+	tristate "TI BQ24735 battery charger support"
+	depends on I2C && GPIOLIB
+	help
+	  Say Y to enable support for the TI BQ24735 battery charger.
+
 config CHARGER_SMB347
 	tristate "Summit Microelectronics SMB347 Battery Charger"
 	depends on I2C

drivers/power/Makefile

@@ -52,6 +52,7 @@ obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
 obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
+obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
 obj-$(CONFIG_POWER_AVS)		+= avs/
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
 obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o

drivers/power/ab8500_charger.c

@@ -766,7 +766,6 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 			ret = -ENXIO;
 			break;
 		}
-		break;
 	case USB_STAT_CARKIT_1:
 	case USB_STAT_CARKIT_2:
 	case USB_STAT_ACA_DOCK_CHARGER:
@@ -1387,8 +1386,12 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
 		 * the GPADC module independant of the AB8500 chargers
 		 */
 		if (!di->vddadc_en_ac) {
-			regulator_enable(di->regu);
-			di->vddadc_en_ac = true;
+			ret = regulator_enable(di->regu);
+			if (ret)
+				dev_warn(di->dev,
+					"Failed to enable regulator\n");
+			else
+				di->vddadc_en_ac = true;
 		}
 
 		/* Check if the requested voltage or current is valid */
@@ -1556,8 +1559,12 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
 		 * the GPADC module independant of the AB8500 chargers
 		 */
 		if (!di->vddadc_en_usb) {
-			regulator_enable(di->regu);
-			di->vddadc_en_usb = true;
+			ret = regulator_enable(di->regu);
+			if (ret)
+				dev_warn(di->dev,
+					"Failed to enable regulator\n");
+			else
+				di->vddadc_en_usb = true;
 		}
 
 		/* Enable USB charging */

drivers/power/bq2415x_charger.c

@@ -605,9 +605,13 @@ static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq,
 {
 	int val = (mV/10 - 350) / 2;
 
+	/*
+	 * According to datasheet, maximum battery regulation voltage is
+	 * 4440mV which is b101111 = 47.
+	 */
 	if (val < 0)
 		val = 0;
-	else if (val > 94) /* FIXME: Max is 94 or 122 ? Set max value ? */
+	else if (val > 47)
 		return -EINVAL;
 
 	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val,

drivers/power/charger-manager.c

@@ -1378,7 +1378,8 @@ static int charger_manager_register_sysfs(struct charger_manager *cm)
 		charger = &desc->charger_regulators[i];
 
 		snprintf(buf, 10, "charger.%d", i);
-		str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
+		str = devm_kzalloc(cm->dev,
+				sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
 		if (!str) {
 			ret = -ENOMEM;
 			goto err;
@@ -1452,30 +1453,23 @@ static int charger_manager_probe(struct platform_device *pdev)
 			rtc_dev = NULL;
 			dev_err(&pdev->dev, "Cannot get RTC %s\n",
 				g_desc->rtc_name);
-			ret = -ENODEV;
-			goto err_alloc;
+			return -ENODEV;
 		}
 	}
 
 	if (!desc) {
 		dev_err(&pdev->dev, "No platform data (desc) found\n");
-		ret = -ENODEV;
-		goto err_alloc;
+		return -ENODEV;
 	}
 
-	cm = kzalloc(sizeof(struct charger_manager), GFP_KERNEL);
-	if (!cm) {
-		ret = -ENOMEM;
-		goto err_alloc;
-	}
+	cm = devm_kzalloc(&pdev->dev,
+			sizeof(struct charger_manager),	GFP_KERNEL);
+	if (!cm)
+		return -ENOMEM;
 
 	/* Basic Values. Unspecified are Null or 0 */
 	cm->dev = &pdev->dev;
-	cm->desc = kmemdup(desc, sizeof(struct charger_desc), GFP_KERNEL);
-	if (!cm->desc) {
-		ret = -ENOMEM;
-		goto err_alloc_desc;
-	}
+	cm->desc = desc;
 	cm->last_temp_mC = INT_MIN; /* denotes "unmeasured, yet" */
 
 	/*
@@ -1498,27 +1492,23 @@ static int charger_manager_probe(struct platform_device *pdev)
 	}
 
 	if (!desc->charger_regulators || desc->num_charger_regulators < 1) {
-		ret = -EINVAL;
 		dev_err(&pdev->dev, "charger_regulators undefined\n");
-		goto err_no_charger;
+		return -EINVAL;
 	}
 
 	if (!desc->psy_charger_stat || !desc->psy_charger_stat[0]) {
 		dev_err(&pdev->dev, "No power supply defined\n");
-		ret = -EINVAL;
-		goto err_no_charger_stat;
+		return -EINVAL;
 	}
 
 	/* Counting index only */
 	while (desc->psy_charger_stat[i])
 		i++;
 
-	cm->charger_stat = kzalloc(sizeof(struct power_supply *) * (i + 1),
-				   GFP_KERNEL);
-	if (!cm->charger_stat) {
-		ret = -ENOMEM;
-		goto err_no_charger_stat;
-	}
+	cm->charger_stat = devm_kzalloc(&pdev->dev,
+				sizeof(struct power_supply *) * i, GFP_KERNEL);
+	if (!cm->charger_stat)
+		return -ENOMEM;
 
 	for (i = 0; desc->psy_charger_stat[i]; i++) {
 		cm->charger_stat[i] = power_supply_get_by_name(
@@ -1526,8 +1516,7 @@ static int charger_manager_probe(struct platform_device *pdev)
 		if (!cm->charger_stat[i]) {
 			dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
 				desc->psy_charger_stat[i]);
-			ret = -ENODEV;
-			goto err_chg_stat;
+			return -ENODEV;
 		}
 	}
 
@@ -1535,21 +1524,18 @@ static int charger_manager_probe(struct platform_device *pdev)
 	if (!cm->fuel_gauge) {
 		dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
 			desc->psy_fuel_gauge);
-		ret = -ENODEV;
-		goto err_chg_stat;
+		return -ENODEV;
 	}
 
 	if (desc->polling_interval_ms == 0 ||
 	    msecs_to_jiffies(desc->polling_interval_ms) <= CM_JIFFIES_SMALL) {
 		dev_err(&pdev->dev, "polling_interval_ms is too small\n");
-		ret = -EINVAL;
-		goto err_chg_stat;
+		return -EINVAL;
 	}
 
 	if (!desc->temperature_out_of_range) {
 		dev_err(&pdev->dev, "there is no temperature_out_of_range\n");
-		ret = -EINVAL;
-		goto err_chg_stat;
+		return -EINVAL;
 	}
 
 	if (!desc->charging_max_duration_ms ||
@@ -1570,14 +1556,13 @@ static int charger_manager_probe(struct platform_device *pdev)
 	cm->charger_psy.name = cm->psy_name_buf;
 
 	/* Allocate for psy properties because they may vary */
-	cm->charger_psy.properties = kzalloc(sizeof(enum power_supply_property)
+	cm->charger_psy.properties = devm_kzalloc(&pdev->dev,
+				sizeof(enum power_supply_property)
 				* (ARRAY_SIZE(default_charger_props) +
-				NUM_CHARGER_PSY_OPTIONAL),
-				GFP_KERNEL);
-	if (!cm->charger_psy.properties) {
-		ret = -ENOMEM;
-		goto err_chg_stat;
-	}
+				NUM_CHARGER_PSY_OPTIONAL), GFP_KERNEL);
+	if (!cm->charger_psy.properties)
+		return -ENOMEM;
+
 	memcpy(cm->charger_psy.properties, default_charger_props,
 		sizeof(enum power_supply_property) *
 		ARRAY_SIZE(default_charger_props));
@@ -1614,7 +1599,7 @@ static int charger_manager_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
 			cm->charger_psy.name);
-		goto err_register;
+		return ret;
 	}
 
 	/* Register extcon device for charger cable */
@@ -1655,8 +1640,6 @@ static int charger_manager_probe(struct platform_device *pdev)
 		charger = &desc->charger_regulators[i];
 		sysfs_remove_group(&cm->charger_psy.dev->kobj,
 				&charger->attr_g);
-
-		kfree(charger->attr_g.name);
 	}
 err_reg_extcon:
 	for (i = 0; i < desc->num_charger_regulators; i++) {
@@ -1674,16 +1657,7 @@ static int charger_manager_probe(struct platform_device *pdev)
 	}
 
 	power_supply_unregister(&cm->charger_psy);
-err_register:
-	kfree(cm->charger_psy.properties);
-err_chg_stat:
-	kfree(cm->charger_stat);
-err_no_charger_stat:
-err_no_charger:
-	kfree(cm->desc);
-err_alloc_desc:
-	kfree(cm);
-err_alloc:
+
 	return ret;
 }
 
@@ -1718,11 +1692,6 @@ static int charger_manager_remove(struct platform_device *pdev)
 
 	try_charger_enable(cm, false);
 
-	kfree(cm->charger_psy.properties);
-	kfree(cm->charger_stat);
-	kfree(cm->desc);
-	kfree(cm);
-
 	return 0;
 }
 

drivers/power/isp1704_charger.c

@@ -2,6 +2,7 @@
  * ISP1704 USB Charger Detection driver
  *
  * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 - 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -65,10 +66,6 @@ struct isp1704_charger {
 	unsigned		present:1;
 	unsigned		online:1;
 	unsigned		current_max;
-
-	/* temp storage variables */
-	unsigned long		event;
-	unsigned		max_power;
 };
 
 static inline int isp1704_read(struct isp1704_charger *isp, u32 reg)
@@ -231,56 +228,59 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
 	return ret;
 }
 
+static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp)
+{
+	if (isp1704_charger_detect(isp) &&
+			isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP)
+		return true;
+	else
+		return false;
+}
+
 static void isp1704_charger_work(struct work_struct *data)
 {
-	int			detect;
-	unsigned long		event;
-	unsigned		power;
 	struct isp1704_charger	*isp =
 		container_of(data, struct isp1704_charger, work);
 	static DEFINE_MUTEX(lock);
 
-	event = isp->event;
-	power = isp->max_power;
-
 	mutex_lock(&lock);
 
-	if (event != USB_EVENT_NONE)
-		isp1704_charger_set_power(isp, 1);
-
-	switch (event) {
+	switch (isp->phy->last_event) {
 	case USB_EVENT_VBUS:
-		isp->online = true;
+		/* do not call wall charger detection more times */
+		if (!isp->present) {
+			isp->online = true;
+			isp->present = 1;
+			isp1704_charger_set_power(isp, 1);
+
+			/* detect wall charger */
+			if (isp1704_charger_detect_dcp(isp)) {
+				isp->psy.type = POWER_SUPPLY_TYPE_USB_DCP;
+				isp->current_max = 1800;
+			} else {
+				isp->psy.type = POWER_SUPPLY_TYPE_USB;
+				isp->current_max = 500;
+			}
 
-		/* detect charger */
-		detect = isp1704_charger_detect(isp);
-
-		if (detect) {
-			isp->present = detect;
-			isp->psy.type = isp1704_charger_type(isp);
+			/* enable data pullups */
+			if (isp->phy->otg->gadget)
+				usb_gadget_connect(isp->phy->otg->gadget);
 		}
 
-		switch (isp->psy.type) {
-		case POWER_SUPPLY_TYPE_USB_DCP:
-			isp->current_max = 1800;
-			break;
-		case POWER_SUPPLY_TYPE_USB_CDP:
+		if (isp->psy.type != POWER_SUPPLY_TYPE_USB_DCP) {
 			/*
 			 * Only 500mA here or high speed chirp
 			 * handshaking may break
 			 */
-			isp->current_max = 500;
-			/* FALLTHROUGH */
-		case POWER_SUPPLY_TYPE_USB:
-		default:
-			/* enable data pullups */
-			if (isp->phy->otg->gadget)
-				usb_gadget_connect(isp->phy->otg->gadget);
+			if (isp->current_max > 500)
+				isp->current_max = 500;
+
+			if (isp->current_max > 100)
+				isp->psy.type = POWER_SUPPLY_TYPE_USB_CDP;
 		}
 		break;
 	case USB_EVENT_NONE:
 		isp->online = false;
-		isp->current_max = 0;
 		isp->present = 0;
 		isp->current_max = 0;
 		isp->psy.type = POWER_SUPPLY_TYPE_USB;
@@ -298,12 +298,6 @@ static void isp1704_charger_work(struct work_struct *data)
 
 		isp1704_charger_set_power(isp, 0);
 		break;
-	case USB_EVENT_ENUMERATED:
-		if (isp->present)
-			isp->current_max = 1800;
-		else
-			isp->current_max = power;
-		break;
 	default:
 		goto out;
 	}
@@ -314,16 +308,11 @@ static void isp1704_charger_work(struct work_struct *data)
 }
 
 static int isp1704_notifier_call(struct notifier_block *nb,
-		unsigned long event, void *power)
+		unsigned long val, void *v)
 {
 	struct isp1704_charger *isp =
 		container_of(nb, struct isp1704_charger, nb);
 
-	isp->event = event;
-
-	if (power)
-		isp->max_power = *((unsigned *)power);
-
 	schedule_work(&isp->work);
 
 	return NOTIFY_OK;
@@ -462,13 +451,13 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 	if (isp->phy->otg->gadget)
 		usb_gadget_disconnect(isp->phy->otg->gadget);
 
+	if (isp->phy->last_event == USB_EVENT_NONE)
+		isp1704_charger_set_power(isp, 0);
+
 	/* Detect charger if VBUS is valid (the cable was already plugged). */
-	ret = isp1704_read(isp, ULPI_USB_INT_STS);
-	isp1704_charger_set_power(isp, 0);
-	if ((ret & ULPI_INT_VBUS_VALID) && !isp->phy->otg->default_a) {
-		isp->event = USB_EVENT_VBUS;
+	if (isp->phy->last_event == USB_EVENT_VBUS &&
+			!isp->phy->otg->default_a)
 		schedule_work(&isp->work);
-	}
 
 	return 0;
 fail2:

drivers/power/pm2301_charger.c

@@ -205,7 +205,7 @@ static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
 }
 
 
-int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
+static int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
 {
 	queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
 
@@ -722,8 +722,12 @@ static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
 
 		dev_dbg(pm2->dev, "Enable AC: %dmV %dmA\n", vset, iset);
 		if (!pm2->vddadc_en_ac) {
-			regulator_enable(pm2->regu);
-			pm2->vddadc_en_ac = true;
+			ret = regulator_enable(pm2->regu);
+			if (ret)
+				dev_warn(pm2->dev,
+					"Failed to enable vddadc regulator\n");
+			else
+				pm2->vddadc_en_ac = true;
 		}
 
 		ret = pm2xxx_charging_init(pm2);
@@ -953,37 +957,24 @@ static int  pm2xxx_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
 	struct pm2xxx_charger *pm2;
-	int ret = 0;
 
 	pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
-	if (!pm2) {
-		dev_err(pm2->dev, "no pm2xxx_charger data supplied\n");
-		ret = -EINVAL;
-		return ret;
-	}
-
 	clear_lpn_pin(pm2);
 
-	return ret;
+	return 0;
 }
 
 static int  pm2xxx_runtime_resume(struct device *dev)
 {
 	struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
 	struct pm2xxx_charger *pm2;
-	int ret = 0;
 
 	pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
-	if (!pm2) {
-		dev_err(pm2->dev, "no pm2xxx_charger data supplied\n");
-		ret = -EINVAL;
-		return ret;
-	}
 
 	if (gpio_is_valid(pm2->lpn_pin) && gpio_get_value(pm2->lpn_pin) == 0)
 		set_lpn_pin(pm2);
 
-	return ret;
+	return 0;
 }
 
 #endif

drivers/power/tps65090-charger.c

@@ -15,15 +15,17 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
+#include <linux/slab.h>
+
 #include <linux/mfd/tps65090.h>
 
 #define TPS65090_REG_INTR_STS	0x00
@@ -185,10 +187,6 @@ static irqreturn_t tps65090_charger_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-#if defined(CONFIG_OF)
-
-#include <linux/of_device.h>
-
 static struct tps65090_platform_data *
 		tps65090_parse_dt_charger_data(struct platform_device *pdev)
 {
@@ -210,13 +208,6 @@ static struct tps65090_platform_data *
 	return pdata;
 
 }
-#else
-static struct tps65090_platform_data *
-		tps65090_parse_dt_charger_data(struct platform_device *pdev)
-{
-	return NULL;
-}
-#endif
 
 static int tps65090_charger_probe(struct platform_device *pdev)
 {
@@ -228,7 +219,7 @@ static int tps65090_charger_probe(struct platform_device *pdev)
 
 	pdata = dev_get_platdata(pdev->dev.parent);
 
-	if (!pdata && pdev->dev.of_node)
+	if (IS_ENABLED(CONFIG_OF) && !pdata && pdev->dev.of_node)
 		pdata = tps65090_parse_dt_charger_data(pdev);
 
 	if (!pdata) {
@@ -277,13 +268,13 @@ static int tps65090_charger_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(cdata->dev, "Unable to register irq %d err %d\n", irq,
 			ret);
-		goto fail_free_irq;
+		goto fail_unregister_supply;
 	}
 
 	ret = tps65090_config_charger(cdata);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "charger config failed, err %d\n", ret);
-		goto fail_free_irq;
+		goto fail_unregister_supply;
 	}
 
 	/* Check for charger presence */
@@ -292,14 +283,14 @@ static int tps65090_charger_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(cdata->dev, "%s(): Error in reading reg 0x%x", __func__,
 			TPS65090_REG_CG_STATUS1);
-		goto fail_free_irq;
+		goto fail_unregister_supply;
 	}
 
 	if (status1 != 0) {
 		ret = tps65090_enable_charging(cdata);
 		if (ret < 0) {
 			dev_err(cdata->dev, "error enabling charger\n");
-			goto fail_free_irq;
+			goto fail_unregister_supply;
 		}
 		cdata->ac_online = 1;
 		power_supply_changed(&cdata->ac);
@@ -307,8 +298,6 @@ static int tps65090_charger_probe(struct platform_device *pdev)
 
 	return 0;
 
-fail_free_irq:
-	devm_free_irq(cdata->dev, irq, cdata);
 fail_unregister_supply:
 	power_supply_unregister(&cdata->ac);
 
@@ -319,7 +308,6 @@ static int tps65090_charger_remove(struct platform_device *pdev)
 {
 	struct tps65090_charger *cdata = platform_get_drvdata(pdev);
 
-	devm_free_irq(cdata->dev, cdata->irq, cdata);
 	power_supply_unregister(&cdata->ac);
 
 	return 0;

drivers/power/twl4030_charger.c

@@ -495,10 +495,38 @@ static enum power_supply_property twl4030_charger_props[] = {
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
+#ifdef CONFIG_OF
+static const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct twl4030_bci_platform_data *pdata;
+	u32 num;
+
+	if (!np)
+		return NULL;
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return pdata;
+
+	if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0)
+		pdata->bb_uvolt = num;
+	if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0)
+		pdata->bb_uamp = num;
+	return pdata;
+}
+#else
+static inline const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int __init twl4030_bci_probe(struct platform_device *pdev)
 {
 	struct twl4030_bci *bci;
-	struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
+	const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
 	int ret;
 	u32 reg;
 
@@ -506,6 +534,9 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	if (bci == NULL)
 		return -ENOMEM;
 
+	if (!pdata)
+		pdata = twl4030_bci_parse_dt(&pdev->dev);
+
 	bci->dev = &pdev->dev;
 	bci->irq_chg = platform_get_irq(pdev, 0);
 	bci->irq_bci = platform_get_irq(pdev, 1);
@@ -581,8 +612,11 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 
 	twl4030_charger_enable_ac(true);
 	twl4030_charger_enable_usb(bci, true);
-	twl4030_charger_enable_backup(pdata->bb_uvolt,
-				      pdata->bb_uamp);
+	if (pdata)
+		twl4030_charger_enable_backup(pdata->bb_uvolt,
+					      pdata->bb_uamp);
+	else
+		twl4030_charger_enable_backup(0, 0);
 
 	return 0;
 
@@ -631,10 +665,17 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id twl_bci_of_match[] = {
+	{.compatible = "ti,twl4030-bci", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, twl_bci_of_match);
+
 static struct platform_driver twl4030_bci_driver = {
 	.driver	= {
 		.name	= "twl4030_bci",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(twl_bci_of_match),
 	},
 	.remove	= __exit_p(twl4030_bci_remove),
 };

include/linux/power/bq24735-charger.h

+/*
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __CHARGER_BQ24735_H_
+#define __CHARGER_BQ24735_H_
+
+#include <linux/types.h>
+#include <linux/power_supply.h>
+
+struct bq24735_platform {
+	uint32_t charge_current;
+	uint32_t charge_voltage;
+	uint32_t input_current;
+
+	const char *name;
+
+	int status_gpio;
+	int status_gpio_active_low;
+	bool status_gpio_valid;
+
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+#endif /* __CHARGER_BQ24735_H_ */