Commit a74420e0 authored by Alexander Duyck's avatar Alexander Duyck Committed by Jeff Kirsher

igb: Update RXDCTL/TXDCTL configurations

This change cleans up the RXDCTL and TXDCTL configurations and optimizes RX
performance by allowing back write-backs on all hardware other than 82576.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: default avatarAaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 765cf997
......@@ -100,11 +100,12 @@ struct vf_data_storage {
*/
#define IGB_RX_PTHRESH 8
#define IGB_RX_HTHRESH 8
#define IGB_RX_WTHRESH 1
#define IGB_TX_PTHRESH 8
#define IGB_TX_HTHRESH 1
#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \
adapter->msix_entries) ? 1 : 4)
#define IGB_TX_WTHRESH ((hw->mac.type == e1000_82576 && \
adapter->msix_entries) ? 1 : 16)
adapter->msix_entries) ? 1 : 16)
/* this is the size past which hardware will drop packets when setting LPE=0 */
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
......
......@@ -2666,14 +2666,12 @@ void igb_configure_tx_ring(struct igb_adapter *adapter,
struct igb_ring *ring)
{
struct e1000_hw *hw = &adapter->hw;
u32 txdctl;
u32 txdctl = 0;
u64 tdba = ring->dma;
int reg_idx = ring->reg_idx;
/* disable the queue */
txdctl = rd32(E1000_TXDCTL(reg_idx));
wr32(E1000_TXDCTL(reg_idx),
txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
wr32(E1000_TXDCTL(reg_idx), 0);
wrfl();
mdelay(10);
......@@ -2685,7 +2683,7 @@ void igb_configure_tx_ring(struct igb_adapter *adapter,
ring->head = hw->hw_addr + E1000_TDH(reg_idx);
ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
writel(0, ring->head);
wr32(E1000_TDH(reg_idx), 0);
writel(0, ring->tail);
txdctl |= IGB_TX_PTHRESH;
......@@ -3028,12 +3026,10 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
struct e1000_hw *hw = &adapter->hw;
u64 rdba = ring->dma;
int reg_idx = ring->reg_idx;
u32 srrctl, rxdctl;
u32 srrctl = 0, rxdctl = 0;
/* disable the queue */
rxdctl = rd32(E1000_RXDCTL(reg_idx));
wr32(E1000_RXDCTL(reg_idx),
rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
wr32(E1000_RXDCTL(reg_idx), 0);
/* Set DMA base address registers */
wr32(E1000_RDBAL(reg_idx),
......@@ -3045,7 +3041,7 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
/* initialize head and tail */
ring->head = hw->hw_addr + E1000_RDH(reg_idx);
ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
writel(0, ring->head);
wr32(E1000_RDH(reg_idx), 0);
writel(0, ring->tail);
/* set descriptor configuration */
......@@ -3076,13 +3072,12 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
/* set filtering for VMDQ pools */
igb_set_vmolr(adapter, reg_idx & 0x7, true);
/* enable receive descriptor fetching */
rxdctl = rd32(E1000_RXDCTL(reg_idx));
rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
rxdctl &= 0xFFF00000;
rxdctl |= IGB_RX_PTHRESH;
rxdctl |= IGB_RX_HTHRESH << 8;
rxdctl |= IGB_RX_WTHRESH << 16;
/* enable receive descriptor fetching */
rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
wr32(E1000_RXDCTL(reg_idx), rxdctl);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment