Commit a744e016 authored by Ivan Kokshaysky's avatar Ivan Kokshaysky Committed by Linus Torvalds

alpha: resurrect Cypress IDE quirk

Which was removed in the hope that generic legacy IDE quirk in
drivers/pci/probe.c is sufficient for Cypress IDE.
It isn't, as this controller has non-standard BAR layout:
secondary channel registers are in the BAR0-1 of the second
PCI function - not in the BAR2-3 of the same function, as the
generic quirk routine assumes.
Signed-off-by: default avatarIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent d559d4a2
......@@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i
static void __init
quirk_cypress(struct pci_dev *dev)
{
/* The Notorious Cy82C693 chip. */
/* The generic legacy mode IDE fixup in drivers/pci/probe.c
doesn't work correctly with the Cypress IDE controller as
it has non-standard register layout. Fix that. */
if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
dev->resource[2].start = dev->resource[3].start = 0;
dev->resource[2].end = dev->resource[3].end = 0;
dev->resource[2].flags = dev->resource[3].flags = 0;
if (PCI_FUNC(dev->devfn) == 2) {
dev->resource[0].start = 0x170;
dev->resource[0].end = 0x177;
dev->resource[1].start = 0x376;
dev->resource[1].end = 0x376;
}
}
/* The Cypress bridge responds on the PCI bus in the address range
0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
way to turn this off. The bridge also supports several extended
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment