Commit a7823180 authored by Kathiravan T's avatar Kathiravan T Committed by Bjorn Andersson

arm64: dts: qcom: ipq5332: add support for the RDP442 variant

Add the initial device tree support for the Reference Design
Platform(RDP) 442 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, SPI NOR, eMMC and I2C.
Signed-off-by: default avatarKathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509160133.3794-3-quic_kathirav@quicinc.com
parent 68c4c671
......@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
......
// SPDX-License-Identifier: BSD-3-Clause
/*
* IPQ5332 RDP442 board device tree source
*
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
/dts-v1/;
#include "ipq5332.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ5332 MI01.3";
compatible = "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332";
aliases {
serial0 = &blsp1_uart0;
};
chosen {
stdout-path = "serial0";
};
};
&blsp1_uart0 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_i2c1 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_spi0 {
pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
pinctrl-names = "default";
status = "okay";
flash@0 {
compatible = "micron,n25q128a11", "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
};
};
&sdhc {
bus-width = <4>;
max-frequency = <192000000>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
non-removable;
pinctrl-0 = <&sdc_default_state>;
pinctrl-names = "default";
status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
&xo_board {
clock-frequency = <24000000>;
};
/* PINCTRL */
&tlmm {
i2c_1_pins: i2c-1-state {
pins = "gpio29", "gpio30";
function = "blsp1_i2c0";
drive-strength = <8>;
bias-pull-up;
};
sdc_default_state: sdc-default-state {
clk-pins {
pins = "gpio13";
function = "sdc_clk";
drive-strength = <8>;
bias-disable;
};
cmd-pins {
pins = "gpio12";
function = "sdc_cmd";
drive-strength = <8>;
bias-pull-up;
};
data-pins {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
function = "sdc_data";
drive-strength = <8>;
bias-pull-up;
};
};
spi_0_data_clk_pins: spi-0-data-clk-state {
pins = "gpio14", "gpio15", "gpio16";
function = "blsp0_spi";
drive-strength = <2>;
bias-pull-down;
};
spi_0_cs_pins: spi-0-cs-state {
pins = "gpio17";
function = "blsp0_spi";
drive-strength = <2>;
bias-pull-up;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment