serial: 8250: Eliminate needless local in irq handlers

dma_err is not used other than for boolean evaluation;
substitute the actual operation directly.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_omap.c

@@ -1033,7 +1033,6 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 	unsigned char status;
 	unsigned long flags;
 	u8 iir;
-	int dma_err = 0;
 
 	serial8250_rpm_get(up);
 
@@ -1048,9 +1047,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 	status = serial_port_in(port, UART_LSR);
 
 	if (status & (UART_LSR_DR | UART_LSR_BI)) {
-
-		dma_err = omap_8250_rx_dma(up, iir);
-		if (dma_err) {
+		if (omap_8250_rx_dma(up, iir)) {
 			status = serial8250_rx_chars(up, status);
 			omap_8250_rx_dma(up, 0);
 		}
@@ -1066,8 +1063,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 			 * try again due to an earlier failer which
 			 * might have been resolved by now.
 			 */
-			dma_err = omap_8250_tx_dma(up);
-			if (dma_err)
+			if (omap_8250_tx_dma(up))
 				serial8250_tx_chars(up);
 		}
 	}

drivers/tty/serial/8250/8250_port.c

@@ -1796,7 +1796,6 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	unsigned char status;
 	unsigned long flags;
 	struct uart_8250_port *up = up_to_u8250p(port);
-	int dma_err = 0;
 
 	if (iir & UART_IIR_NO_INT)
 		return 0;
@@ -1808,10 +1807,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	DEBUG_INTR("status = %x...", status);
 
 	if (status & (UART_LSR_DR | UART_LSR_BI)) {
-		if (up->dma)
-			dma_err = up->dma->rx_dma(up, iir);
-
-		if (!up->dma || dma_err)
+		if (!up->dma || up->dma->rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
 	serial8250_modem_status(up);