Commit a8acd5a1 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'uniphier-dt-v4.10' of...

Merge tag 'uniphier-dt-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.10

- Add OPP tables to support generic cpufreq driver
- Use more clocks/resets properties
- Misc fixes and cleanups

* tag 'uniphier-dt-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: make compatible of syscon nodes SoC-specific
  ARM: dts: uniphier: add clocks/resets to EHCI nodes of sLD3 SoC
  ARM: dts: uniphier: remove redundant serial fifo-size properties
  ARM: dts: uniphier: make 32bit SoC DTSI linear
  ARM: dts: uniphier: add CPU clocks and OPP table for PXs2 SoC
  ARM: dts: uniphier: add CPU clocks and OPP table for Pro5 SoC
  ARM: dts: uniphier: increase register region size of sysctrl node
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents c9905f01 13b4a619
/*
* Device Tree Source commonly used by UniPhier ARM SoCs
*
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/include/ "skeleton.dtsi"
/ {
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
clocks {
refclk: ref {
#clock-cells = <0>;
compatible = "fixed-clock";
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-parent = <&intc>;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
};
serial1: serial@54006900 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
};
serial2: serial@54006a00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
};
serial3: serial@54006b00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_system_bus>;
};
smpctrl@59800000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
mio_clk: clock {
#clock-cells = <1>;
};
mio_rst: reset {
#reset-cells = <1>;
};
};
perictrl@59820000 {
compatible = "socionext,uniphier-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
#clock-cells = <1>;
};
peri_rst: reset {
#reset-cells = <1>;
};
};
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
interrupts = <1 11 0x104>;
clocks = <&arm_timer_clk>;
};
timer@60000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x60000600 0x20>;
interrupts = <1 13 0x104>;
clocks = <&arm_timer_clk>;
};
intc: interrupt-controller@60001000 {
compatible = "arm,cortex-a9-gic";
reg = <0x60001000 0x1000>,
<0x60000100 0x100>;
#interrupt-cells = <3>;
interrupt-controller;
};
soc-glue@5f800000 {
compatible = "socionext,uniphier-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
pinctrl: pinctrl {
/* specify compatible in each SoC DTSI */
};
};
sysctrl@61840000 {
compatible = "socionext,uniphier-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
sys_clk: clock {
#clock-cells = <1>;
};
sys_rst: reset {
#reset-cells = <1>;
};
};
};
};
/include/ "uniphier-pinctrl.dtsi"
......@@ -43,7 +43,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
/include/ "uniphier-common32.dtsi"
/include/ "skeleton.dtsi"
/ {
compatible = "socionext,uniphier-ld4";
......@@ -61,147 +61,267 @@ cpu@0 {
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
clocks {
refclk: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
arm_timer_clk: arm_timer_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
};
&soc {
l2: l2-cache@500c0000 {
compatible = "socionext,uniphier-system-cache";
reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
interrupts = <0 174 4>, <0 175 4>;
cache-unified;
cache-size = <(512 * 1024)>;
cache-sets = <256>;
cache-line-size = <128>;
cache-level = <2>;
};
i2c0: i2c@58400000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58400000 0x40>;
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
#size-cells = <1>;
ranges;
interrupt-parent = <&intc>;
i2c1: i2c@58480000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58480000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
l2: l2-cache@500c0000 {
compatible = "socionext,uniphier-system-cache";
reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
<0x506c0000 0x400>;
interrupts = <0 174 4>, <0 175 4>;
cache-unified;
cache-size = <(512 * 1024)>;
cache-sets = <256>;
cache-line-size = <128>;
cache-level = <2>;
};
/* chip-internal connection for DMD */
i2c2: i2c@58500000 {
compatible = "socionext,uniphier-i2c";
reg = <0x58500000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
clock-frequency = <400000>;
};
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
};
i2c3: i2c@58580000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58580000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
serial1: serial@54006900 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
};
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
};
serial2: serial@54006a00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
};
usb1: usb@5a810100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
};
serial3: serial@54006b00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
interrupts = <0 29 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
};
usb2: usb@5a820100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
};
i2c0: i2c@58400000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58400000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
};
i2c1: i2c@58480000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58480000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
&refclk {
clock-frequency = <24576000>;
};
/* chip-internal connection for DMD */
i2c2: i2c@58500000 {
compatible = "socionext,uniphier-i2c";
reg = <0x58500000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
clock-frequency = <400000>;
};
&serial3 {
interrupts = <0 29 4>;
};
i2c3: i2c@58580000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58580000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
&mio_clk {
compatible = "socionext,uniphier-ld4-mio-clock";
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_system_bus>;
};
&mio_rst {
compatible = "socionext,uniphier-ld4-mio-reset";
resets = <&sys_rst 7>;
};
smpctrl@59800000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
&peri_clk {
compatible = "socionext,uniphier-ld4-peri-clock";
};
mioctrl@59810000 {
compatible = "socionext,uniphier-ld4-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
&peri_rst {
compatible = "socionext,uniphier-ld4-peri-reset";
};
mio_clk: clock {
compatible = "socionext,uniphier-ld4-mio-clock";
#clock-cells = <1>;
};
&pinctrl {
compatible = "socionext,uniphier-ld4-pinctrl";
};
mio_rst: reset {
compatible = "socionext,uniphier-ld4-mio-reset";
#reset-cells = <1>;
};
};
&sys_clk {
compatible = "socionext,uniphier-ld4-clock";
};
perictrl@59820000 {
compatible = "socionext,uniphier-ld4-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
compatible = "socionext,uniphier-ld4-peri-clock";
#clock-cells = <1>;
};
peri_rst: reset {
compatible = "socionext,uniphier-ld4-peri-reset";
#reset-cells = <1>;
};
};
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
usb1: usb@5a810100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
&sys_rst {
compatible = "socionext,uniphier-ld4-reset";
usb2: usb@5a820100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
soc-glue@5f800000 {
compatible = "socionext,uniphier-ld4-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld4-pinctrl";
};
};
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
interrupts = <1 11 0x104>;
clocks = <&arm_timer_clk>;
};
timer@60000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x60000600 0x20>;
interrupts = <1 13 0x104>;
clocks = <&arm_timer_clk>;
};
intc: interrupt-controller@60001000 {
compatible = "arm,cortex-a9-gic";
reg = <0x60001000 0x1000>,
<0x60000100 0x100>;
#interrupt-cells = <3>;
interrupt-controller;
};
sysctrl@61840000 {
compatible = "socionext,uniphier-ld4-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
sys_clk: clock {
compatible = "socionext,uniphier-ld4-clock";
#clock-cells = <1>;
};
sys_rst: reset {
compatible = "socionext,uniphier-ld4-reset";
#reset-cells = <1>;
};
};
};
};
/include/ "uniphier-pinctrl.dtsi"
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -135,7 +135,6 @@ serial0: serial@54006800 {
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
clocks = <&sys_clk 0>;
fifo-size = <64>;
};
serial1: serial@54006900 {
......@@ -144,7 +143,6 @@ serial1: serial@54006900 {
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
clocks = <&sys_clk 0>;
fifo-size = <64>;
};
serial2: serial@54006a00 {
......@@ -153,7 +151,6 @@ serial2: serial@54006a00 {
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
clocks = <&sys_clk 0>;
fifo-size = <64>;
};
i2c0: i2c@58400000 {
......@@ -225,7 +222,7 @@ smpctrl@59800000 {
};
mioctrl@59810000 {
compatible = "socionext,uniphier-mioctrl",
compatible = "socionext,uniphier-sld3-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
......@@ -245,6 +242,9 @@ usb0: usb@5a800100 {
status = "disabled";
reg = <0x5a800100 0x100>;
interrupts = <0 80 4>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
usb1: usb@5a810100 {
......@@ -252,6 +252,9 @@ usb1: usb@5a810100 {
status = "disabled";
reg = <0x5a810100 0x100>;
interrupts = <0 81 4>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
usb2: usb@5a820100 {
......@@ -259,6 +262,9 @@ usb2: usb@5a820100 {
status = "disabled";
reg = <0x5a820100 0x100>;
interrupts = <0 82 4>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
usb3: usb@5a830100 {
......@@ -266,12 +272,15 @@ usb3: usb@5a830100 {
status = "disabled";
reg = <0x5a830100 0x100>;
interrupts = <0 83 4>;
clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>,
<&mio_rst 15>;
};
sysctrl@f1840000 {
compatible = "socionext,uniphier-sysctrl",
compatible = "socionext,uniphier-sld3-sysctrl",
"simple-mfd", "syscon";
reg = <0xf1840000 0x4000>;
reg = <0xf1840000 0x10000>;
sys_clk: clock {
compatible = "socionext,uniphier-sld3-clock";
......
......@@ -43,7 +43,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
/include/ "uniphier-common32.dtsi"
/include/ "skeleton.dtsi"
/ {
compatible = "socionext,uniphier-sld8";
......@@ -61,146 +61,267 @@ cpu@0 {
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
clocks {
refclk: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
arm_timer_clk: arm_timer_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
};
&soc {
l2: l2-cache@500c0000 {
compatible = "socionext,uniphier-system-cache";
reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
interrupts = <0 174 4>, <0 175 4>;
cache-unified;
cache-size = <(256 * 1024)>;
cache-sets = <256>;
cache-line-size = <128>;
cache-level = <2>;
};
i2c0: i2c@58400000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58400000 0x40>;
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
#size-cells = <1>;
ranges;
interrupt-parent = <&intc>;
i2c1: i2c@58480000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58480000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
l2: l2-cache@500c0000 {
compatible = "socionext,uniphier-system-cache";
reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
<0x506c0000 0x400>;
interrupts = <0 174 4>, <0 175 4>;
cache-unified;
cache-size = <(256 * 1024)>;
cache-sets = <256>;
cache-line-size = <128>;
cache-level = <2>;
};
/* chip-internal connection for DMD */
i2c2: i2c@58500000 {
compatible = "socionext,uniphier-i2c";
reg = <0x58500000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
clock-frequency = <400000>;
};
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
};
i2c3: i2c@58580000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58580000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
serial1: serial@54006900 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
};
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
};
serial2: serial@54006a00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
};
usb1: usb@5a810100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
};
serial3: serial@54006b00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
interrupts = <0 29 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
};
usb2: usb@5a820100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
};
};
i2c0: i2c@58400000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58400000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
clock-frequency = <100000>;
};
&refclk {
clock-frequency = <25000000>;
};
i2c1: i2c@58480000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58480000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
clock-frequency = <100000>;
};
&serial3 {
interrupts = <0 29 4>;
};
/* chip-internal connection for DMD */
i2c2: i2c@58500000 {
compatible = "socionext,uniphier-i2c";
reg = <0x58500000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
clock-frequency = <400000>;
};
&mio_clk {
compatible = "socionext,uniphier-sld8-mio-clock";
};
i2c3: i2c@58580000 {
compatible = "socionext,uniphier-i2c";
status = "disabled";
reg = <0x58580000 0x40>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
clock-frequency = <100000>;
};
&mio_rst {
compatible = "socionext,uniphier-sld8-mio-reset";
resets = <&sys_rst 7>;
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_system_bus>;
};
&peri_clk {
compatible = "socionext,uniphier-sld8-peri-clock";
};
smpctrl@59800000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
&peri_rst {
compatible = "socionext,uniphier-sld8-peri-reset";
};
mioctrl@59810000 {
compatible = "socionext,uniphier-sld8-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
&pinctrl {
compatible = "socionext,uniphier-sld8-pinctrl";
};
mio_clk: clock {
compatible = "socionext,uniphier-sld8-mio-clock";
#clock-cells = <1>;
};
&sys_clk {
compatible = "socionext,uniphier-sld8-clock";
};
mio_rst: reset {
compatible = "socionext,uniphier-sld8-mio-reset";
#reset-cells = <1>;
};
};
perictrl@59820000 {
compatible = "socionext,uniphier-sld8-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
compatible = "socionext,uniphier-sld8-peri-clock";
#clock-cells = <1>;
};
peri_rst: reset {
compatible = "socionext,uniphier-sld8-peri-reset";
#reset-cells = <1>;
};
};
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a800100 0x100>;
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
usb1: usb@5a810100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a810100 0x100>;
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
usb2: usb@5a820100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
reg = <0x5a820100 0x100>;
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
&sys_rst {
compatible = "socionext,uniphier-sld8-reset";
soc-glue@5f800000 {
compatible = "socionext,uniphier-sld8-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
pinctrl: pinctrl {
compatible = "socionext,uniphier-sld8-pinctrl";
};
};
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
interrupts = <1 11 0x104>;
clocks = <&arm_timer_clk>;
};
timer@60000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x60000600 0x20>;
interrupts = <1 13 0x104>;
clocks = <&arm_timer_clk>;
};
intc: interrupt-controller@60001000 {
compatible = "arm,cortex-a9-gic";
reg = <0x60001000 0x1000>,
<0x60000100 0x100>;
#interrupt-cells = <3>;
interrupt-controller;
};
sysctrl@61840000 {
compatible = "socionext,uniphier-sld8-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
sys_clk: clock {
compatible = "socionext,uniphier-sld8-clock";
#clock-cells = <1>;
};
sys_rst: reset {
compatible = "socionext,uniphier-sld8-reset";
#reset-cells = <1>;
};
};
};
};
/include/ "uniphier-pinctrl.dtsi"
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment