preempt: Restore preemption model selection configs

Commit c597bfdd ("sched: Provide Kconfig support for default dynamic
preempt mode") changed the selectable config names for the preemption
model. This means a config file must now select

  CONFIG_PREEMPT_BEHAVIOUR=y

rather than

  CONFIG_PREEMPT=y

to get a preemptible kernel. This means all arch config files would need to
be updated - right now they'll all end up with the default
CONFIG_PREEMPT_NONE_BEHAVIOUR.

Rather than touch a good hundred of config files, restore usage of
CONFIG_PREEMPT{_NONE, _VOLUNTARY}. Make them configure:
o The build-time preemption model when !PREEMPT_DYNAMIC
o The default boot-time preemption model when PREEMPT_DYNAMIC

Add siblings of those configs with the _BUILD suffix to unconditionally
designate the build-time preemption model (PREEMPT_DYNAMIC is built with
the "highest" preemption model it supports, aka PREEMPT). Downstream
configs should by now all be depending / selected by CONFIG_PREEMPTION
rather than CONFIG_PREEMPT, so only a few sites need patching up.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20211110202448.4054153-2-valentin.schneider@arm.com

include/linux/kernel.h

@@ -85,7 +85,7 @@
 struct completion;
 struct user;
 
-#ifdef CONFIG_PREEMPT_VOLUNTARY
+#ifdef CONFIG_PREEMPT_VOLUNTARY_BUILD
 
 extern int __cond_resched(void);
 # define might_resched() __cond_resched()

include/linux/vermagic.h

@@ -15,7 +15,7 @@
 #else
 #define MODULE_VERMAGIC_SMP ""
 #endif
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_BUILD
 #define MODULE_VERMAGIC_PREEMPT "preempt "
 #elif defined(CONFIG_PREEMPT_RT)
 #define MODULE_VERMAGIC_PREEMPT "preempt_rt "

init/Makefile

@@ -30,7 +30,7 @@ $(obj)/version.o: include/generated/compile.h
 quiet_cmd_compile.h = CHK     $@
       cmd_compile.h = \
 	$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@	\
-	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)"	\
+	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT_BUILD)"	\
 	"$(CONFIG_PREEMPT_RT)" $(CONFIG_CC_VERSION_TEXT) "$(LD)"
 
 include/generated/compile.h: FORCE

kernel/Kconfig.preempt

 # SPDX-License-Identifier: GPL-2.0-only
 
+config PREEMPT_NONE_BUILD
+	bool
+
+config PREEMPT_VOLUNTARY_BUILD
+	bool
+
+config PREEMPT_BUILD
+	bool
+	select PREEMPTION
+	select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK
+
 choice
 	prompt "Preemption Model"
-	default PREEMPT_NONE_BEHAVIOUR
+	default PREEMPT_NONE
 
-config PREEMPT_NONE_BEHAVIOUR
+config PREEMPT_NONE
 	bool "No Forced Preemption (Server)"
-	select PREEMPT_NONE if !PREEMPT_DYNAMIC
+	select PREEMPT_NONE_BUILD if !PREEMPT_DYNAMIC
 	help
 	  This is the traditional Linux preemption model, geared towards
 	  throughput. It will still provide good latencies most of the
@@ -18,10 +29,10 @@ config PREEMPT_NONE_BEHAVIOUR
 	  raw processing power of the kernel, irrespective of scheduling
 	  latencies.
 
-config PREEMPT_VOLUNTARY_BEHAVIOUR
+config PREEMPT_VOLUNTARY
 	bool "Voluntary Kernel Preemption (Desktop)"
 	depends on !ARCH_NO_PREEMPT
-	select PREEMPT_VOLUNTARY if !PREEMPT_DYNAMIC
+	select PREEMPT_VOLUNTARY_BUILD if !PREEMPT_DYNAMIC
 	help
 	  This option reduces the latency of the kernel by adding more
 	  "explicit preemption points" to the kernel code. These new
@@ -37,10 +48,10 @@ config PREEMPT_VOLUNTARY_BEHAVIOUR
 
 	  Select this if you are building a kernel for a desktop system.
 
-config PREEMPT_BEHAVIOUR
+config PREEMPT
 	bool "Preemptible Kernel (Low-Latency Desktop)"
 	depends on !ARCH_NO_PREEMPT
-	select PREEMPT
+	select PREEMPT_BUILD
 	help
 	  This option reduces the latency of the kernel by making
 	  all kernel code (that is not executing in a critical section)
@@ -58,7 +69,7 @@ config PREEMPT_BEHAVIOUR
 
 config PREEMPT_RT
 	bool "Fully Preemptible Kernel (Real-Time)"
-	depends on EXPERT && ARCH_SUPPORTS_RT && !PREEMPT_DYNAMIC
+	depends on EXPERT && ARCH_SUPPORTS_RT
 	select PREEMPTION
 	help
 	  This option turns the kernel into a real-time kernel by replacing
@@ -75,17 +86,6 @@ config PREEMPT_RT
 
 endchoice
 
-config PREEMPT_NONE
-	bool
-
-config PREEMPT_VOLUNTARY
-	bool
-
-config PREEMPT
-	bool
-	select PREEMPTION
-	select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK
-
 config PREEMPT_COUNT
        bool
 
@@ -95,8 +95,8 @@ config PREEMPTION
 
 config PREEMPT_DYNAMIC
 	bool "Preemption behaviour defined on boot"
-	depends on HAVE_PREEMPT_DYNAMIC
-	select PREEMPT
+	depends on HAVE_PREEMPT_DYNAMIC && !PREEMPT_RT
+	select PREEMPT_BUILD
 	default y
 	help
 	  This option allows to define the preemption model on the kernel

kernel/sched/core.c

@@ -6628,13 +6628,13 @@ __setup("preempt=", setup_preempt_mode);
 static void __init preempt_dynamic_init(void)
 {
 	if (preempt_dynamic_mode == preempt_dynamic_undefined) {
-		if (IS_ENABLED(CONFIG_PREEMPT_NONE_BEHAVIOUR)) {
+		if (IS_ENABLED(CONFIG_PREEMPT_NONE)) {
 			sched_dynamic_update(preempt_dynamic_none);
-		} else if (IS_ENABLED(CONFIG_PREEMPT_VOLUNTARY_BEHAVIOUR)) {
+		} else if (IS_ENABLED(CONFIG_PREEMPT_VOLUNTARY)) {
 			sched_dynamic_update(preempt_dynamic_voluntary);
 		} else {
 			/* Default static call setting, nothing to do */
-			WARN_ON_ONCE(!IS_ENABLED(CONFIG_PREEMPT_BEHAVIOUR));
+			WARN_ON_ONCE(!IS_ENABLED(CONFIG_PREEMPT));
 			preempt_dynamic_mode = preempt_dynamic_full;
 			pr_info("Dynamic Preempt: full\n");
 		}