drm/i915/dsc: change DSC param tables to follow the DSC model

After cross-checking DSC models (20150914, 20161212, 20210623) change
values in rc_parameters tables to follow config files present inside
the DSC model. Handle two places, where i915 tables diverged from the
model, by patching the rc values in the code.

Note: I left one case uncorrected, 8bpp/10bpc/range_max_qp[0], because
the table in the VESA DSC 1.1 sets it to 4.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517102807.2181589-2-dmitry.baryshkov@linaro.org

drivers/gpu/drm/i915/display/intel_vdsc.c

@@ -87,7 +87,7 @@ static const struct rc_parameters rc_parameters[][MAX_COLUMN_INDEX] = {
 		}
 	},
 	/* 6BPP/14BPC */
-	{ 768, 15, 6144, 15, 25, 23, 27, {
+	{ 768, 15, 6144, 15, 25, 23, 23, {
 		{ 0, 16, 0 }, { 7, 18, -2 }, { 15, 20, -2 }, { 16, 20, -4 },
 		{ 17, 21, -6 }, { 17, 21, -6 }, { 18, 21, -6 }, { 18, 22, -8 },
 		{ 19, 23, -8 }, { 20, 24, -10 }, { 21, 24, -10 },
@@ -116,6 +116,10 @@ static const struct rc_parameters rc_parameters[][MAX_COLUMN_INDEX] = {
 	},
 	/* 8BPP/10BPC */
 	{ 512, 12, 6144, 7, 16, 15, 15, {
+		/*
+		 * DSC model/pre-SCR-cfg has 8 for range_max_qp[0], however
+		 * VESA DSC 1.1 Table E-5 sets it to 4.
+		 */
 		{ 0, 4, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 5, 10, -2 },
 		{ 7, 11, -4 }, { 7, 11, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
 		{ 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
@@ -133,7 +137,7 @@ static const struct rc_parameters rc_parameters[][MAX_COLUMN_INDEX] = {
 	},
 	/* 8BPP/14BPC */
 	{ 512, 12, 6144, 15, 24, 23, 23, {
-		{ 0, 12, 0 }, { 5, 13, 0 }, { 11, 15, 0 }, { 12, 17, -2 },
+		{ 0, 12, 2 }, { 5, 13, 0 }, { 11, 15, 0 }, { 12, 17, -2 },
 		{ 15, 19, -4 }, { 15, 19, -6 }, { 15, 19, -8 }, { 15, 20, -8 },
 		{ 15, 21, -8 }, { 15, 22, -10 }, { 17, 22, -10 },
 		{ 17, 23, -12 }, { 17, 23, -12 }, { 21, 24, -12 },
@@ -598,6 +602,20 @@ int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
 			DSC_RANGE_BPG_OFFSET_MASK;
 	}
 
+	if (DISPLAY_VER(dev_priv) < 13) {
+		/*
+		 * FIXME: verify that the hardware actually needs these
+		 * modifications rather than them being simple typos.
+		 */
+		if (compressed_bpp == 6 &&
+		    vdsc_cfg->bits_per_component == 8)
+			vdsc_cfg->rc_quant_incr_limit1 = 23;
+
+		if (compressed_bpp == 8 &&
+		    vdsc_cfg->bits_per_component == 14)
+			vdsc_cfg->rc_range_params[0].range_bpg_offset = 0;
+	}
+
 	/*
 	 * BitsPerComponent value determines mux_word_size:
 	 * When BitsPerComponent is less than or 10bpc, muxWordSize will be equal to