Merge branch 'bond_stacked_vlans'

Vlad Yasevich says:

====================
Fixed stacked vlan usage on top of bonds

Bonding device driver now support q-in-q on top for bonds.  There are
a few issues here though.

First, when arp monitoring is used, bonding driver will not correctly
tag traffic if the source of the arp device was configured on top of
q-in-q.  It may also incorrectly pick the wrong vlan id if the ordering
of that upper devices isn't as expected (there is no guarntee on ordering).

Second, the alb/tlb may use what would be considered 'inner' vlans in
its learning announcements, as it simply announces all vlans configured
on top of the bond without regard for encapsulation/stacking.

This series fixes the above 2 issues.  This series also depends on the
functionality introduced in
	http://patchwork.ozlabs.org/patch/349766/

Since v1:
  - Changed how patch1 verifies the device path.  We no longer use the
    _all_upper version of the function.  We find the path and if it was
    found, then collect the vlan information.
  - Use the constant to devine maximum vlan nest level support on top
    of bonding.  This can be changed if 2 is too low.
  - Inlude patch2 into the series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_alb.c

@@ -1045,7 +1045,7 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
 	/* loop through vlans and send one packet for each */
 	rcu_read_lock();
 	netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) {
-		if (upper->priv_flags & IFF_802_1Q_VLAN)
+		if (is_vlan_dev(upper) && vlan_get_encap_level(upper) == 0)
 			alb_send_lp_vid(slave, mac_addr,
 					vlan_dev_vlan_id(upper));
 	}

drivers/net/bonding/bond_main.c

@@ -2126,10 +2126,10 @@ static bool bond_has_this_ip(struct bonding *bond, __be32 ip)
  */
 static void bond_arp_send(struct net_device *slave_dev, int arp_op,
 			  __be32 dest_ip, __be32 src_ip,
-			  struct bond_vlan_tag *inner,
-			  struct bond_vlan_tag *outer)
+			  struct bond_vlan_tag *tags)
 {
 	struct sk_buff *skb;
+	int i;
 
 	pr_debug("arp %d on slave %s: dst %pI4 src %pI4\n",
 		 arp_op, slave_dev->name, &dest_ip, &src_ip);
@@ -2141,21 +2141,26 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op,
 		net_err_ratelimited("ARP packet allocation failed\n");
 		return;
 	}
-	if (outer->vlan_id) {
-		if (inner->vlan_id) {
-			pr_debug("inner tag: proto %X vid %X\n",
-				 ntohs(inner->vlan_proto), inner->vlan_id);
-			skb = __vlan_put_tag(skb, inner->vlan_proto,
-					     inner->vlan_id);
-			if (!skb) {
-				net_err_ratelimited("failed to insert inner VLAN tag\n");
-				return;
-			}
-		}
 
-		pr_debug("outer reg: proto %X vid %X\n",
-			 ntohs(outer->vlan_proto), outer->vlan_id);
-		skb = vlan_put_tag(skb, outer->vlan_proto, outer->vlan_id);
+	/* Go through all the tags backwards and add them to the packet */
+	for (i = BOND_MAX_VLAN_ENCAP - 1; i > 0; i--) {
+		if (!tags[i].vlan_id)
+			continue;
+
+		pr_debug("inner tag: proto %X vid %X\n",
+			 ntohs(tags[i].vlan_proto), tags[i].vlan_id);
+		skb = __vlan_put_tag(skb, tags[i].vlan_proto,
+				     tags[i].vlan_id);
+		if (!skb) {
+			net_err_ratelimited("failed to insert inner VLAN tag\n");
+			return;
+		}
+	}
+	/* Set the outer tag */
+	if (tags[0].vlan_id) {
+		pr_debug("outer tag: proto %X vid %X\n",
+			 ntohs(tags[0].vlan_proto), tags[0].vlan_id);
+		skb = vlan_put_tag(skb, tags[0].vlan_proto, tags[0].vlan_id);
 		if (!skb) {
 			net_err_ratelimited("failed to insert outer VLAN tag\n");
 			return;
@@ -2164,22 +2169,52 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op,
 	arp_xmit(skb);
 }
 
+/* Validate the device path between the @start_dev and the @end_dev.
+ * The path is valid if the @end_dev is reachable through device
+ * stacking.
+ * When the path is validated, collect any vlan information in the
+ * path.
+ */
+static bool bond_verify_device_path(struct net_device *start_dev,
+				    struct net_device *end_dev,
+				    struct bond_vlan_tag *tags)
+{
+	struct net_device *upper;
+	struct list_head  *iter;
+	int  idx;
+
+	if (start_dev == end_dev)
+		return true;
+
+	netdev_for_each_upper_dev_rcu(start_dev, upper, iter) {
+		if (bond_verify_device_path(upper, end_dev, tags)) {
+			if (is_vlan_dev(upper)) {
+				idx = vlan_get_encap_level(upper);
+				if (idx >= BOND_MAX_VLAN_ENCAP)
+					return false;
+
+				tags[idx].vlan_proto =
+						    vlan_dev_vlan_proto(upper);
+				tags[idx].vlan_id = vlan_dev_vlan_id(upper);
+			}
+			return true;
+		}
+	}
+
+	return false;
+}
 
 static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 {
-	struct net_device *upper, *vlan_upper;
-	struct list_head *iter, *vlan_iter;
 	struct rtable *rt;
-	struct bond_vlan_tag inner, outer;
+	struct bond_vlan_tag tags[BOND_MAX_VLAN_ENCAP];
 	__be32 *targets = bond->params.arp_targets, addr;
 	int i;
+	bool ret;
 
 	for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) {
 		pr_debug("basa: target %pI4\n", &targets[i]);
-		inner.vlan_proto = 0;
-		inner.vlan_id = 0;
-		outer.vlan_proto = 0;
-		outer.vlan_id = 0;
+		memset(tags, 0, sizeof(tags));
 
 		/* Find out through which dev should the packet go */
 		rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
@@ -2192,7 +2227,8 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 				net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
 						     bond->dev->name,
 						     &targets[i]);
-			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], 0, &inner, &outer);
+			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
+				      0, tags);
 			continue;
 		}
 
@@ -2201,52 +2237,12 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 			goto found;
 
 		rcu_read_lock();
-		/* first we search only for vlan devices. for every vlan
-		 * found we verify its upper dev list, searching for the
-		 * rt->dst.dev. If found we save the tag of the vlan and
-		 * proceed to send the packet.
-		 */
-		netdev_for_each_all_upper_dev_rcu(bond->dev, vlan_upper,
-						  vlan_iter) {
-			if (!is_vlan_dev(vlan_upper))
-				continue;
-
-			if (vlan_upper == rt->dst.dev) {
-				outer.vlan_proto = vlan_dev_vlan_proto(vlan_upper);
-				outer.vlan_id = vlan_dev_vlan_id(vlan_upper);
-				rcu_read_unlock();
-				goto found;
-			}
-			netdev_for_each_all_upper_dev_rcu(vlan_upper, upper,
-							  iter) {
-				if (upper == rt->dst.dev) {
-					/* If the upper dev is a vlan dev too,
-					 *  set the vlan tag to inner tag.
-					 */
-					if (is_vlan_dev(upper)) {
-						inner.vlan_proto = vlan_dev_vlan_proto(upper);
-						inner.vlan_id = vlan_dev_vlan_id(upper);
-					}
-					outer.vlan_proto = vlan_dev_vlan_proto(vlan_upper);
-					outer.vlan_id = vlan_dev_vlan_id(vlan_upper);
-					rcu_read_unlock();
-					goto found;
-				}
-			}
-		}
-
-		/* if the device we're looking for is not on top of any of
-		 * our upper vlans, then just search for any dev that
-		 * matches, and in case it's a vlan - save the id
-		 */
-		netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) {
-			if (upper == rt->dst.dev) {
-				rcu_read_unlock();
-				goto found;
-			}
-		}
+		ret = bond_verify_device_path(bond->dev, rt->dst.dev, tags);
 		rcu_read_unlock();
 
+		if (ret)
+			goto found;
+
 		/* Not our device - skip */
 		pr_debug("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
 			 bond->dev->name, &targets[i],
@@ -2259,7 +2255,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		addr = bond_confirm_addr(rt->dst.dev, targets[i], 0);
 		ip_rt_put(rt);
 		bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
-			      addr, &inner, &outer);
+			      addr, tags);
 	}
 }
 

drivers/net/bonding/bonding.h

@@ -36,6 +36,7 @@
 
 #define bond_version DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n"
 
+#define BOND_MAX_VLAN_ENCAP	2
 #define BOND_MAX_ARP_TARGETS	16
 
 #define BOND_DEFAULT_MIIMON	100

include/linux/if_vlan.h

@@ -484,4 +484,10 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb,
 		 */
 		skb->protocol = htons(ETH_P_802_2);
 }
+
+static inline int vlan_get_encap_level(struct net_device *dev)
+{
+	BUG_ON(!is_vlan_dev(dev));
+	return vlan_dev_priv(dev)->nest_level;
+}
 #endif /* !(_LINUX_IF_VLAN_H_) */

include/linux/netdevice.h

@@ -3056,9 +3056,18 @@ extern int		weight_p;
 extern int		bpf_jit_enable;
 
 bool netdev_has_upper_dev(struct net_device *dev, struct net_device *upper_dev);
+struct net_device *netdev_upper_get_next_dev_rcu(struct net_device *dev,
+						     struct list_head **iter);
 struct net_device *netdev_all_upper_get_next_dev_rcu(struct net_device *dev,
 						     struct list_head **iter);
 
+/* iterate through upper list, must be called under RCU read lock */
+#define netdev_for_each_upper_dev_rcu(dev, updev, iter) \
+	for (iter = &(dev)->adj_list.upper, \
+	     updev = netdev_upper_get_next_dev_rcu(dev, &(iter)); \
+	     updev; \
+	     updev = netdev_upper_get_next_dev_rcu(dev, &(iter)))
+
 /* iterate through upper list, must be called under RCU read lock */
 #define netdev_for_each_all_upper_dev_rcu(dev, updev, iter) \
 	for (iter = &(dev)->all_adj_list.upper, \

net/core/dev.c

@@ -4541,6 +4541,32 @@ void *netdev_adjacent_get_private(struct list_head *adj_list)
 }
 EXPORT_SYMBOL(netdev_adjacent_get_private);
 
+/**
+ * netdev_upper_get_next_dev_rcu - Get the next dev from upper list
+ * @dev: device
+ * @iter: list_head ** of the current position
+ *
+ * Gets the next device from the dev's upper list, starting from iter
+ * position. The caller must hold RCU read lock.
+ */
+struct net_device *netdev_upper_get_next_dev_rcu(struct net_device *dev,
+						 struct list_head **iter)
+{
+	struct netdev_adjacent *upper;
+
+	WARN_ON_ONCE(!rcu_read_lock_held() && !lockdep_rtnl_is_held());
+
+	upper = list_entry_rcu((*iter)->next, struct netdev_adjacent, list);
+
+	if (&upper->list == &dev->adj_list.upper)
+		return NULL;
+
+	*iter = &upper->list;
+
+	return upper->dev;
+}
+EXPORT_SYMBOL(netdev_upper_get_next_dev_rcu);
+
 /**
  * netdev_all_upper_get_next_dev_rcu - Get the next dev from upper list
  * @dev: device